Original Mass Timber Maine (OMT Maine) hired the University of Maine to include Maine-sourced Structural Round Timber (SRT) in a research project that will compare the structural building material to glulam and steel products.
The study is designed to understand and compare the costs, capabilities, and carbon impacts of structural materials that could be used to build a hypothetical instructional and research facility. The study’s initial intent was to assess the impacts on budget and carbon footprint of replacing steel and concrete with glulam and cross-laminated timber in the building’s structural system.
The study will now also include the use of Maine-sourced SRT as a mass timber option for comparison. OMT Maine expects results from the cost and feasibility study later this year, with the Life Cycle Assessment Report to be released in early 2022.
SRT can be used for trusses, columns, and beams in building projects of all types, OMT Maine says.
Related Stories
Codes and Standards | May 14, 2018
Maryland makes general contractors liable for failure of subs to pay employees
GCs could have to pay for up to three times the wages owed.
Codes and Standards | May 10, 2018
Data collection, machine learning boost building efficiency
Sensors, software algorithms squeeze out waste.
Codes and Standards | May 9, 2018
OSHA and state safety agencies write more than 100 silica citations in 6 months
Actions tending to come with investigation of other site conditions.
Codes and Standards | May 8, 2018
Powerhouse coalition builds energy positive buildings
The goal: build buildings that provide more power than they cost to build, run, and demolish.
Codes and Standards | May 7, 2018
Plan advances in Los Angeles for Climate Emergency Mobilization Department
Would oversee efforts to reduce greenhouse gas emissions across the city.
Codes and Standards | May 3, 2018
Data collection, machine learning boost building efficiency
Sensors, software algorithms squeeze out waste.
Codes and Standards | May 2, 2018
Energy Department releases Updated EnergyPlus and OpenStudio building energy modeling tools
The tools can now accept input in epJSON format.
Codes and Standards | May 1, 2018
ASHRAE publishes new energy simulation-aided design standard
Requires building energy modeling during schematic design.
Codes and Standards | Apr 30, 2018
CALGreen projects pre-approved for streamlined LEED v4 requirements
Reduces need to run additional energy models.
Codes and Standards | Apr 26, 2018
New standard supports community resilience
ASTM International guidance supports cost-effective ways to withstand and recover from disasters.
