Each year, when the calendar strikes August 25, the operations of Perrault Farms kick into high gear.Ā
For the next 35 days, the Toppenish, Wash., facilities operate around the clock to harvest, dry, bale and chill the hops that will be sold to commercial and craft brewers worldwide. Ā Ā
āItās a very perishable crop,ā says Steve Perrault, president of the fourth-generation family business. āHops are kind of like a wine grapeāwhen theyāre ready, theyāre ready, and we need to be very efficient at processing them.ā
Perrault commissioned new metal buildings to replace the businessā previous cramped and outdated facilities. The buildings are designed to support maximum productivity during the cropās brief harvesting season. Ā Ā
A 19,530 square-foot hop kiln building is the first stop for the green hop cones after they are stripped from the vines. In this building, propane furnaces blow hot air on the cones to remove excess moisture. The entire process takes about nine hours, 25 percent faster than at the previous facility. Ā Ā
āWeāve cut down our drying time, which has also reduced our propane use and electricity substantially, so itās a much more sustainable facility,ā Perrault says.Ā
After drying, the cones are transported via conveyor to the adjacent 26,000 square-foot hop baling building, where they begin to cool. Ambient air blows through vented air trenches within the concrete floor slab, reducing cone temperature while eliminating the risk of spontaneous combustion.Ā
Ā
Ā
A four-foot cupola extending the full length of the building allows the moist, hot air to escape out of the roof.Ā
Next, the hop cones are compressed into 200-pound bales, stacked and transported by conveyor to the buildingās refrigerated cold room where the temperature is reduced to 28 degrees Fahrenheit.
A second-story office area and conference room at the center of the building overlooks the baling operations, providing a powerful sales tool. The facility also includes a laboratory used in the businessā hop-breeding program as well as an onsite pilot brewery where new varieties of hops can be tested.Ā
The exteriors of both buildings feature metal panels, reinforced concrete tilt-up panels with exposed aggregate finish, and a standing seam metal roof. Ā
āThe panels around the buildings contribute to the architectural design and also protect the structures from damage from forklifts and tractors as they maneuver around the site,ā says Steve Young, general manager of Concord Construction, the Star builder in Wapato, Wash., that oversaw construction. āThe concrete also adds structural strength to the hop baling building when the hops are cooling.āĀ
Extensive use of metal liner wall panels contributes to the structureās interior aesthetics, and the interior space also features hot dipped galvanized structural steel on all frames, columns and rafters so they wonāt be susceptible to rusting from the excess moisture in the air.Ā
The project also includes a 7,500 square-foot equipment cover building.Ā
Because the new facilities process significantly more hops than the previous ones, Perrault Farms has been able to increase the acreage of crops it plants by more than 30 percent.Ā
The new buildings also accommodate the stricter food safety guidelines required by craft brewers, which typically use fresh hops in their brewing process.
āWith the craft brewing industry growing so rapidly, food safety is very important to all of us,ā Perrault says.
The new complex has definitely impressed other hop farmers in the Yakima Valley, the largest hops-producing region in the U.S.Ā
āEverybody who has gone through the buildings is amazed; itās one of the top facilities in the industry right now,ā Perrault says. āThis is something I had to do for the next generations coming up.āĀ
Project construction was completed in 10 months.
āBy going with metal buildings from Star Buildings, it really decreases the construction time, which also makes it more cost-effective,ā Young says.
Related Stories
Building Team | Jun 8, 2022
Alastair MacGregor to lead WSP USA Property and Buildings Business
Alastair (Aly) MacGregor has been named the executive business line leader for Property and Buildings at WSP USA, one of the nationās largest engineering and professional services consultancies.
Codes and Standards | Jun 8, 2022
Florida Legislature passes bill requiring stricter condominium inspection
The Florida Legislature recently passed a bill to beef up building inspection requirements for many of the stateās condominiums.
Office Buildings | Jun 8, 2022
Former L.A. Times newsroom/printing plant remade into office campus
Phase 1 of The Press, an adaptive reuse project that is converting an old Los Angeles Times facility into a modern office campus, was recently completed in Costa Mesa, Calif.
Codes and Standards | Jun 7, 2022
FEMA launches National Initiative to Advance Building Codes
The U.S. Federal Emergency Management Agency (FEMA) has launched a new government-wide effort to boost national resiliency and reduce energy costs.
Plumbing | Jun 7, 2022
Sloan launches āSinks Beyond the Restroomā innovation
Sloan, the worldās leading manufacturer of commercial plumbing systems, has launched its āSinks Beyond the Restroomā concept.
Building Team | Jun 7, 2022
Announcing construction inclusion week 2022: October 17-21, 2022
Save the date for Construction Inclusion Week 2022: October 17-21, 2022.
University Buildings | Jun 7, 2022
Newfoundland university STEM building emulates natural elements, local traditions
Memorial University of Newfoundland (MUN) recently opened a new building that will provide interdisciplinary learning and research space for Faculties of Science and Engineering.
Codes and Standards | Jun 2, 2022
Guide helps schools find funding for buildings from federal, state government
New Buildings Institute (NBI) recently released a guide to help schools identify funding programs for facilities improvements available from federal and state government programs.
Airports | Jun 2, 2022
SOM-designed International Arrival Facility at Seattleās SeaāTac airport features the worldās largest aerial walkway
The Skidmore, Owings & Merrill (SOM)-designed International Arrivals Facility (IAF) at Seattle-Tacoma International Airport has opened, replacing a 50-year-old arrival facility.Ā Ā
Women in Design+Construction | Jun 2, 2022
Women in Architecture: How HMC Pioneers Gender Equality
A survey by the Association of Collegiate Schools of Architecture (ACSA) shows that while women account for nearly half of graduates from architecture programs, they only make up about 15 percent of licensed architects.