flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

The main noisemakers in healthcare facilities: behavior and technology

Healthcare Facilities

The main noisemakers in healthcare facilities: behavior and technology

Noise control is even more important now that the Affordable Care Act has mandated that reimbursement for hospital services be based, in part, on patient satisfaction surveys. 


By John Caulfield, Senior Editor | July 6, 2015
The main noisemakers in healthcare facilities: behavior and technology

In-board placement of bathrooms buffers corridor noise for birthing rooms at MaineGeneral Hospital in Augusta, Maine. Anton Grassl/Esto

Over the past few decades, numerous research studies have concluded that noise in hospitals can have a deleterious effect on patient care and recovery. “The first step in noise reduction in hospitals is awareness about the effect that noise has on patients and providers,” says Paul Barach, MD, Clinical Professor, Wayne State University, Detroit.

Barach cites studies that estimate average hospital noise at 70–80 decibels, or 20–30 db above World Health Organization recommended levels. Older hospitals have even worse acoustics. Barach also suggests that noise in general is an “abstraction” that even newer hospitals find difficult to define and mitigate.

Noise control is even more important now that the Affordable Care Act has mandated that reimbursement for hospital services be based, in part, on patient satisfaction surveys.  These surveys have consistently given the lowest scores to hospital environments for sleep disruption. It’s little wonder, then, that hospitals are pursuing more quietude in their plans for new buildings, renovations and expansions, as well as in their personnel training.

“Acoustics is invisible until it’s a problem,” observes James Perry, Chief Technology Officer for the New York-based acoustical and A/V consultant Cerami & Associates. He emphasizes, too, that noise “is about behavior,” and often is generated “by activities [more] than building systems.”

 

Different rooms, different noises

Noise abatement strategies need to take into account that hospitals have many rooms with different noise characteristics, says Ben Davenny, PE, INCE, LEED AP EDAC, a Senior Acoustical Consultant with Acentech. Patient floors are usually organized around bustling nurses’ stations. MRI rooms are particularly sensitive to vibration through floors and walls. Operating rooms require 20 air exchanges per hour, creating their own unique din.

There are lobbies, waiting rooms, examination and emergency rooms where privacy is paramount. Many larger, regional hospitals have helipads: their chopper noise must be kept from entering the building.

Davenny points out that it is useful to consider the type of noise source. “There’s a false impression that a quieter environment is always a better one,” he says. “The trick is to take a different look at these noise sources and develop more efficient methods in reducing disturbance to patients.”

Medical technology has become a new noise source that has “overwhelmed” the hospital environment, says Joanne Solet, PhD, Assistant Clinical Professor of Medicine at Harvard Medical School. Solet was part of a team of researchers that conducted a three-day study in which the team subjected 12 healthy participants to 14 different sounds to determine which sounds were most likely to disrupt sleep.

The team’s findings, published in the Annals of Internal Medicine (June 2012), found that “electronic sounds” were more arousing than others. “If these noises bothered a dozen healthy people, you can bet they are bothering people who are patients,” says Solet.

 

Over the din, patients are heard

Noise reduction started showing up on hospitals’ radar screens in 2006, when the Centers for Medicare & Medicaid Services (CMS) implemented an ongoing national survey—known as the Hospital Consumer Assessment of Healthcare Providers and Systems, or HCAHCP—to measure customer satisfaction with hospital care. When the Affordable Care Act became law, it included a requirement that the survey results be used as one measure to calculate payments that CMS made to acute-care hospitals.

“The surveys let consumers weigh in, and with HCAHCP, hospitals can’t bury their issues,” says David Sykes, Chairman of the Acoustics Research Council.

From July 1, 2013 through June 30, 2014, the latest period tracked and posted by Medicare.gov, 62% of patients surveyed said their rooms were “always quiet at night,” with another 29% saying their rooms were “usually quiet.” Those scores were below patient ratings for 30 other criteria of their hospital stay, such as cleanliness and communications.

With one in three hospitals operating in the red, according to the American Hospital Association, patient satisfaction has become a make or break issue. The poorest-performing hospitals have 1% of their total annual reimbursements withheld by CMS; the highest-performing facilities get a 1% bonus. By 2017, those fines and bonuses will increase to 2%.

“Hospitals need to know how much quiet a patient needs to be able to sleep because they’re getting dinged by the government if their performance scores are low,” says Gary Madaras, PhD, Associate AIA, ASA, INCE, an Acoustics Specialist with Rockfon, which makes acoustic ceiling products. Solet adds that the government now bases its acceptance levels for patient readmission to hospitals in part on the facility’s past performance.

Healthcare systems are addressing this problem by getting more stakeholders involved in helping them improve patient satisfaction. HGA Architects and Affinity Health solicited input from former patients, family members, and caregivers during pre-design sessions for Affinity’s 25,000-sf Heart, Lung, and Vascular Center at St. Elizabeth Hospital, in Appleton, Wis. Those sessions included discussions about workflow, corridor circulation patterns, and patient privacy. The team also implemented a post-occupancy evaluation determine whether its evidence-based design principles were being achieved in areas that include noise levels.

For several years now, architects have been turning to the Facilities Guidelines Institute’s guidelines for product and design best practices that can help their clients tone down noise and vibration. “We provide the tools to build the better mousetrap,” says FGI CEO Douglas Erickson, FASHE, CHFM, HFDP, CHC.

Stanford Health Care, Palo Alto, Calif., is building an 824,000-sf, 368-bed hospital that is following many of the noise and vibration reduction guidelines laid out by the FGI, says George Tingwald, MD, AIA, ACHA, Director of Medical Planning, Facilities Design and Construction at Stanford Health.

Hospitals are also trying to get their employees to be more alert to the noise they produce. Bonny Slater, Senior Interior Designer-Health & Wellness in Gensler’s Washington, D.C., office, sees hospitals experimenting with “quiet times,” when corridor lights are dimmed to signal when noise volumes should be lowered.

 

Reactions to noise are subjective

Not everyone is convinced that design can alter staff behaviors to reduce hospital noise, especially when a lot of hospitals still don’t coordinate when clinical, food service, and cleaning staffs enter a patient’s room, says Kenneth Van Wyk, President of consultant Acoustics by Design. “There are no dashboards in hospitals,” says Sykes. Chris Kay, ACHE, Managing Principal-National Healthcare & Science Buildings Practice at Jacobs, is even less sanguine about behavioral modification, which he calls “the least effective method of reducing hospital noise.”

Patient surveys have certainly given hospitals more insight into where their services and facilities are falling short or excelling. Jean R. Elrick, MD, Senior Vice President of Administration at Massachusetts General Hospital, in Boston, gets patient narratives every Wednesday. She says she can tell which buildings and departments are performing best. Mass General’s 530,000-sf Lunder Building, which opened in 2011, was among a handful of hospital facilities that closely followed FGI’s 2010 revised guidelines. Elrick says Lunder’s patient scores have consistently risen, and Lunder has become the model the hospital would follow when it renovates or expands other buildings on its campus.

The 640,000-sf MaineGeneral Medical Alfond Center for Health, in Augusta, which opened in August 2013, is another replacement hospital that was built to FGI’s noise and vibration guidelines. As a result, its “always quiet at night” score improved to 76.5% over the period December 2013 through July 2014, from 61.5% over the period January through October 2013. The portion of patients who would recommend the hospital jumped to 76.8%, from 65.2%, according to Rick Albert, MaineGeneral’s Director of Plant Operations.

But patient scores don’t tell the whole story, mainly because surveys don’t identify which noises are causing the most distress. Since 2010, Rockfon’s Madaras has tracked patient scores of about 50 new hospitals. He has found that most new faciliies aren’t that much better than older ones. Those findings lead Madaras to believe that reactions to hospital noises can be individual and subjective.

Solet points out that a certain portion of the population is always going to be more sensitive to their surroundings. So, says Tingwell of Stanford Health Care, a hospital’s biggest dilemma, when devising a noise-reduction strategy, might be figuring out how to assuage patients’ perceptions, real or imagined, about noise.

Related Stories

Mass Timber | Jun 17, 2024

British Columbia hospital features mass timber community hall

The Cowichan District Hospital Replacement Project in Duncan, British Columbia, features an expansive community hall featuring mass timber construction. The hall, designed to promote social interaction and connection to give patients, families, and staff a warm and welcoming environment, connects a Diagnostic and Treatment (“D&T”) Block and Inpatient Tower.

Concrete Technology | Jun 17, 2024

MIT researchers are working on a way to use concrete as an electric battery

Researchers at MIT have developed a concrete mixture that can store electrical energy. The researchers say the mixture of water, cement, and carbon black could be used for building foundations and street paving.

Codes and Standards | Jun 17, 2024

Federal government releases national definition of a zero emissions building

The U.S. Department of Energy has released a new national definition of a zero emissions building. The definition is intended to provide industry guidance to support new and existing commercial and residential buildings to move towards zero emissions across the entire building sector, DOE says.

Multifamily Housing | Jun 14, 2024

AEC inspections are the key to financially viable office to residential adaptive reuse projects

About a year ago our industry was abuzz with an idea that seemed like a one-shot miracle cure for both the shockingly high rate of office vacancies and the worsening housing shortage. The seemingly simple idea of converting empty office buildings to multifamily residential seemed like an easy and elegant solution. However, in the intervening months we’ve seen only a handful of these conversions, despite near universal enthusiasm for the concept. 

Healthcare Facilities | Jun 13, 2024

Top 10 trends in the hospital facilities market

BD+C evaluated more than a dozen of the nation's most prominent hospital construction projects to identify trends that are driving hospital design and construction in the $67 billion healthcare sector. Here’s what we found.

Adaptive Reuse | Jun 13, 2024

4 ways to transform old buildings into modern assets

As cities grow, their office inventories remain largely stagnant. Yet despite changes to the market—including the impact of hybrid work—opportunities still exist. Enter: “Midlife Metamorphosis.”

Affordable Housing | Jun 12, 2024

Studio Libeskind designs 190 affordable housing apartments for seniors

In Brooklyn, New York, the recently opened Atrium at Sumner offers 132,418 sf of affordable housing for seniors. The $132 million project includes 190 apartments—132 of them available to senior households earning below or at 50% of the area median income and 57 units available to formerly homeless seniors. 

Mass Timber | Jun 10, 2024

5 hidden benefits of mass timber design

Mass timber is a materials and design approach that holds immense potential to transform the future of the commercial building industry, as well as our environment. 

Lighting | Jun 10, 2024

LEDs were nearly half of the installed base of lighting products in the U.S. in 2020

Federal government research shows a huge leap in the penetration of LEDs in the lighting market from 2010 to 2020. In 2010 and 2015, LED installations represented 1% and 8% of overall lighting inventory, respectively. 

Libraries | Jun 7, 2024

7 ways to change 'business as usual': The Theodore Roosevelt Presidential Library

One hundred forty years ago, Theodore Roosevelt had a vision that is being realized today. The Theodore Roosevelt Presidential Library is a cutting-edge example of what’s possible when all seven ambitions are pursued to the fullest from the beginning and integrated into the design at every phase and scale.

boombox1
boombox2
native1

More In Category




Museums

UT Dallas opens Morphosis-designed Crow Museum of Asian Art

In Richardson, Tex., the University of Texas at Dallas has opened a second location for the Crow Museum of Asian Art—the first of multiple buildings that will be part of a 12-acre cultural district. When completed, the arts and performance complex, called the Edith and Peter O’Donnell Jr. Athenaeum, will include two museums, a performance hall and music building, a grand plaza, and a dedicated parking structure on the Richardson campus.

halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021