Results from the American Hotel & Lodging Association’s 2010 Lodging Survey showed that luxury and upper-upscale hotels are most likely to feature green amenities and earn green certifications. The survey, which is conducted every two years, was funded by the American Hotel & Lodging Education Foundation and prepared by Smith Travel Research. Results were tallied from 8,800 respondents, for a very respectable 18% response rate. Questions focused on 14 green-related categories, including allergy-free rooms, water-saving programs, energy management systems, recycling programs, green certification, and green renovation.
The chief findings:
- 23% of respondents use energy management sensors in guestrooms, down slightly from 25% reported in 2008. Properties most likely to have sensors: luxury (43%) and upper-upscale (32%) hotels.
- 60% of respondents have recycling programs, up from 40% reported two years ago. Luxury (87%) and upper-upscale (85%) properties are most likely to have these programs, while economy hotels (36%) are least likely.
- 88% of respondents report use of energy-efficient lighting, versus 68% in 2008. Hotels across the board equally report using this type of lighting to a significant degree.
- 69% of respondents say they have a water-saving program in place, up from 46% in 2008. Once again, luxury (80%) and upper-upscale (85%) properties are most likely to have such a program. A significant number of upscale hotels (73%) also report having a water-saving program.
- 51% of respondents report having a digital energy management system in place; this is the first time the question appeared on the survey. Luxury (48%) and upper-upscale hotels (51%) again lead the industry, with only 7% of economy hotels reporting use of a digital energy management system.
- 56% of hotels offer 100% nonsmoking rooms, up from just 38% two years ago. Upscale (70%) and independent brands (66%) are most likely to offer such rooms.
- 71% of luxury hotels report that they are working toward a green certification program, with upper-upscale (64%), upscale (47%), mid-level (43%), and independent (40%) rounding out the category. Least likely to go for certification: interstate hotels (32%).
- 12% of hotels plan to incorporate LEED elements within the next years (if major structural renovations are planned). This is down markedly from the 21% reported in 2008. Luxury (28%) and upper-upscale (16%) are most likely to pursue LEED renovations.
- 10% of hotels reported having incorporated LEED renovations during the past 12 months, again down from 2008, when 20% of hotels reported LEED renovations. Luxury (25%) and independent brands (12%) were most likely to have incorporated LEED.
The 2010 Lodging Survey is available for purchase (free to AH&LA members) at: www.ahla.com.
Related Stories
| Mar 1, 2014
Dramatic fractal roof highlights SOM's new Mumbai airport terminal [slideshow]
The terminal merges new technology and traditional regional architecture, notably in the fractal roof canopy that runs throughout the terminal.
| Feb 28, 2014
Six finalists selected in design competition for Canadian Holocaust monument
David Adjaye and Daniel Libeskind are among the finalists for the National Holocaust Monument, planned near the Canadian War Museum in Ottawa.
| Feb 27, 2014
Gensler reveals 44 design trends for the next decade
The 82-page report covers dozens of emerging trends in healthcare, commercial office, hospitality, tall buildings, and more.
| Feb 27, 2014
Target converts former prison dump into latest big-box store
Target's new San Rafael, Calif., location was built on the site of the former San Quentin prison dump.
| Feb 27, 2014
Open or private offices? It depends on the business plan
Open layouts are grabbing headlines as a hallmark of the new workplace—think the Google campus or Facebook's headquarters. And for smaller-scale operations, open designs are often lauded for being less expensive than private office plans. But does that mean all offices should have an open layout?
| Feb 27, 2014
3 reasons to apply computational fluid dynamics on your next project
From right-sizing mechanical systems to understanding the impact of design alternatives, CFD offers a host of benefits for the Building Team.
| Feb 27, 2014
12 facts about heat-treated glass: Why stronger isn’t always better
Glass is heat-treated for two reasons: the first is to increase its strength to resist external stresses such as wind and snow loads, or thermal loads caused by the sun’s energy. The second is to temper glass so that it meets safety glazing requirements defined by applicable codes or federal standards.
| Feb 27, 2014
Metal Construction Association introduces two Environmental Product Declarations
Two Environmental Product Declarations (EPD), one for Metal Composite Material Panels and one for Roll Formed Steel Panels for Roofs and Walls, are now available free of charge from the Metal Construction Association (MCA) on its website.
| Feb 27, 2014
Bluebeam Software launches Revu 12 for better field-ready document management and project collaboration
The latest version of the company’s flagship solution better enables users in document-intensive industries to digitally collaborate on project documents and more easily connect the office to the field.
| Feb 27, 2014
PocketCake lunches CPU designed for virtual reality simulations
The company's Virtual Reality Simulation Converter Assembly is three times more powerful than the average high-performance computer and allows for up to eight people to experience a virtual reality simulation at the same time.