Results from the American Hotel & Lodging Association’s 2010 Lodging Survey showed that luxury and upper-upscale hotels are most likely to feature green amenities and earn green certifications. The survey, which is conducted every two years, was funded by the American Hotel & Lodging Education Foundation and prepared by Smith Travel Research. Results were tallied from 8,800 respondents, for a very respectable 18% response rate. Questions focused on 14 green-related categories, including allergy-free rooms, water-saving programs, energy management systems, recycling programs, green certification, and green renovation.
The chief findings:
- 23% of respondents use energy management sensors in guestrooms, down slightly from 25% reported in 2008. Properties most likely to have sensors: luxury (43%) and upper-upscale (32%) hotels.
- 60% of respondents have recycling programs, up from 40% reported two years ago. Luxury (87%) and upper-upscale (85%) properties are most likely to have these programs, while economy hotels (36%) are least likely.
- 88% of respondents report use of energy-efficient lighting, versus 68% in 2008. Hotels across the board equally report using this type of lighting to a significant degree.
- 69% of respondents say they have a water-saving program in place, up from 46% in 2008. Once again, luxury (80%) and upper-upscale (85%) properties are most likely to have such a program. A significant number of upscale hotels (73%) also report having a water-saving program.
- 51% of respondents report having a digital energy management system in place; this is the first time the question appeared on the survey. Luxury (48%) and upper-upscale hotels (51%) again lead the industry, with only 7% of economy hotels reporting use of a digital energy management system.
- 56% of hotels offer 100% nonsmoking rooms, up from just 38% two years ago. Upscale (70%) and independent brands (66%) are most likely to offer such rooms.
- 71% of luxury hotels report that they are working toward a green certification program, with upper-upscale (64%), upscale (47%), mid-level (43%), and independent (40%) rounding out the category. Least likely to go for certification: interstate hotels (32%).
- 12% of hotels plan to incorporate LEED elements within the next years (if major structural renovations are planned). This is down markedly from the 21% reported in 2008. Luxury (28%) and upper-upscale (16%) are most likely to pursue LEED renovations.
- 10% of hotels reported having incorporated LEED renovations during the past 12 months, again down from 2008, when 20% of hotels reported LEED renovations. Luxury (25%) and independent brands (12%) were most likely to have incorporated LEED.
The 2010 Lodging Survey is available for purchase (free to AH&LA members) at: www.ahla.com.
Related Stories
Architects | Jun 23, 2015
Architecture Billings Index back to positive territory for May 2015
The American Institute of Architects reported the May ABI score was 51.9, up from a mark of 48.8 in April.
Architects | Jun 23, 2015
If film directors designed homes, what would they look like?
From Burton to Bergman, Gondry to Greenway, artist Federico Babina illustrates what buildings would look like if designed by the world’s greatest directors.
High-rise Construction | Jun 23, 2015
The world's best new skyscrapers for 2015
One World Trade Center and Abu Dhabi's Burj Mohammed Bin Rashid Tower are among the four towers named Best Tall Buildings by the Council on Tall Buildings and Urban Habitat.
Museums | Jun 23, 2015
Moreau Kusunoki's 'art in the city' scheme wins Guggenheim Helsinki design competition
The firm’s design concept makes use of the museum’s site, turning it into a bustling, well-connected waterfront hub.
Architects | Jun 22, 2015
NCARB adopts alternative for certification of foreign architects
The change, effective July 1, 2016, will replace the current BEFA Program’s requirements, eliminating the committee dossier review and the need to document seven years of credentialed practice in a foreign country.
BIM and Information Technology | Jun 21, 2015
11 tips for mastering 3D printing in the AEC world
Early adopters provide first-hand advice on the trials and tribulations of marrying 3D printing with the science of building technology.
Events Facilities | Jun 19, 2015
4 ways convention centers are revamping for the 21st century
Today's convention centers require more flexible spaces, the ability to blend virtual and in-person events, and meaningful sustainability, writes Skanska's Tom Tingle.
Engineers | Jun 18, 2015
Architecture and engineering profit margins deliver third consecutive year of growth
Operating profits of AE firms have reach their highest level since 2009, according to a new report by PSMJ Resources.
Architects | Jun 17, 2015
Starchitects' napkin sketches raise thousands for San Diego’s AIAS chapter
Prominent architects who submitted a total of 23 napkin doodles were Zaha Hadid, Cesar Pelli, Robert Venturi, Massimiliano Fuksas, Thom Mayne, and Bjarke Ingels.
BIM and Information Technology | Jun 16, 2015
What’s next for 3D printing in design and construction?
The 3D printer industry keeps making strides in technology and affordability. Machines can now print with all sorts of powderized materials, from concrete to chocolate.