flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Low-cost methods can have substantial impact on reducing embodied carbon

Codes and Standards

Low-cost methods can have substantial impact on reducing embodied carbon

Whole-building design, material substitution, and specification strategies can slash carbon by up to 46%.


By Peter Fabris, Contributing Editor | September 3, 2021

Courtesy Pixabay

Low- and no-cost measures can significantly reduce embodied carbon in mid-rise commercial office, multifamily, and tilt-up-style buildings, according to Rocky Mountain Institute.

Whole-building design, material substitution, and specification strategies can chop embodied carbon by 24% to 46% in those building types at cost premiums of less than 1%, the Institute says. A recent report by the Institute focused on carbon embodied in structural elements, which accounts for about 80% of a structure’s embodied carbon.

Whole-building design can have the biggest impact on embodied carbon, the report says. Material substitution and specification can also result in substantial embodied carbon savings, especially when targeting carbon-intensive materials such as concrete and steel.

A building’s structure and substructure typically make up the largest sources of up-front embodied carbon—as much as 80%. But the relatively rapid renovation cycle of building interiors associated with tenancy and turnover can account for a similar percentage of emissions over the lifetime of a building.

Related Stories

Codes and Standards | Sep 28, 2017

Resources available for new OSHA respirable crystalline silica regulation

NRCA offers compliance tools for contractors.

Codes and Standards | Sep 28, 2017

New tool compares HVAC system efficiency

IAPMO and Hydronics Industry Alliance unveil BEST to evaluate systems in early design phase.

Codes and Standards | Sep 26, 2017

Anti-drone technology can ward off unauthorized drone flights

The technology can be used to prevent terrorist attacks and spying.

Codes and Standards | Sep 25, 2017

How-to guide to renovating shopping centers available

E.U. research project focuses on energy efficiency and occupant comfort.

Codes and Standards | Sep 21, 2017

After construction crane collapses during Irma, regulations questioned

Cranes rated for 140 mph winds didn’t hold up to 100 mph gusts.

Codes and Standards | Sep 20, 2017

Energy efficiency measures pay off in some not-so-obvious ways

Access to better financing, tax incentives, rent premiums, among the benefits to greener buildings.

Codes and Standards | Sep 19, 2017

Benchmarking regulations prompt jump in green certified properties

2016 saw a slight rise in total certified U.S. green office space.

Codes and Standards | Sep 18, 2017

Changes likely to come to federal wetlands regulations

However, states may step up regulations as feds relax them.

Codes and Standards | Sep 14, 2017

Gentrification means a new mindset for city planners

Rising rents elicit reexamination of zoning principles.

Codes and Standards | Sep 13, 2017

OSHA issues extension for compliance with crane operator certification requirements

Comments on proposed rule sought through Sept. 29.

boombox1
boombox2
native1

More In Category

Warehouses

California bill would limit where distribution centers can be built

A bill that passed the California legislature would limit where distribution centers can be located and impose other rules aimed at reducing air pollution and traffic. Assembly Bill 98 would tighten building standards for new warehouses and ban heavy diesel truck traffic next to sensitive sites including homes, schools, parks and nursing homes.




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021