flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Louisiana officials critical of stricter building standards in flood-prone areas

Codes and Standards

Louisiana officials critical of stricter building standards in flood-prone areas

There are concerns that the restrictions are too stringent for southern areas of the state.


By Peter Fabris, Contributing Editor | February 22, 2015
Louisiana officials critical of stricter building standards in flood-prone areas

Photo: David Fine / FEMA via Wikimedia Commons

Louisiana leaders spoke out against an executive order by President Barack Obama that would put stricter building standards on federally financed projects in flood-prone areas.

The new flood-risk management standard requires infrastructure to be built taller or on higher ground to better withstand flooding. Buildings would have to be built either two or three feet above the base flood elevation for a 100-year flood or above the base elevation for a 500-year flood. A project could also be completed under the guidance of the “best-available, actionable climate science.”

Dwayne Bourgeois, executive director of the North Lafourche Levee District, told Houma Today that the regulations might alter local projects that have already started. South Louisiana's low-lying geography is unlike any other in the country, he said, and should be taken into consideration when federal regulations are made.

U.S. Sens. David Vitter, Bill Cassidy and other Republican representatives are questioning the legality of the executive order. A 60-day comment period is under way before the new standard goes into effect.

Related Stories

| Aug 20, 2013

Code amendment in Dallas would limit building exterior reflectivity

The Dallas City Council is expected to vote soon on a proposed code amendment that would limit a building’s exterior reflectivity of “visible light” to 15%. 

| Aug 20, 2013

Developers of Hollywood skyscraper will dig to see if earthquake fault is on site

New York-based Millennium Partners have agreed to dig a trench on a Hollywood, Calif., property to help determine whether an earthquake fault runs under it.

| Aug 20, 2013

Chinese-made resilient flooring products achieve FloorScore Indoor Air Quality certification

Five of China's leading manufacturers of resilient flooring recently received FloorScore Indoor Air Quality certification from SCS Global Services for their luxury vinyl tile (LVT) products.

| Aug 20, 2013

Florida to get $1 million federal grant to study sinkhole vulnerability

The Florida Geological Survey and the state’s emergency department will receive a $1.08 million federal grant to study sinkhole vulnerability.

| Aug 20, 2013

L.A. City Council approves plan for new $1 billion Watts development

Los Angeles city officials have voted to revitalize a notorious Watts housing project with shops, town homes, and green spaces.

| Aug 19, 2013

Baltimore City Council committee OKs taxpayer assistance for $1.8 billion Harbor Point mixed-use project

A Baltimore City Council committee approved a plan to give millions in taxpayer assistance to the $1.8 billion Harbor Point development.

| Aug 19, 2013

Philadelphia to enforce building energy benchmarking in October

The City of Philadelphia has begun to send out compliance notices regarding its Building Energy Benchmarking Law.

| Aug 19, 2013

Eliminating Fannie Mae, Freddie Mac part of Obama’s housing proposal

President Barack Obama this month outlined a series of policies he said would continue to boost the housing market, including a long-ignored legislative proposal that would allow more Americans to refinance at current low mortgage rates.

| Aug 19, 2013

HUD, New York City collaborate on research center to boost storm resilience

The U.S. Housing and Urban Development Department and New York City will collaborate on a project to create a new research institute and a city-federal park at Jamaica Bay, Queens.

| Aug 16, 2013

Dept. of Homeland Security offers tool to analyze building risk and resilience

The Integrated Rapid Visual Screening tool is designed to determine initial or relative risk and resilience for buildings based on visual inspection only.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021