flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

LEED v4.1 beta registration begins in January

Codes and Standards

LEED v4.1 beta registration begins in January

First releases are O+M, BD+C, and ID+C.


By Peter Fabris, Contributing Editor | January 4, 2019
Wind farm

Courtesy Pixabay

New LEED v4.1 beta versions will be open for registration in January 2018.

The U.S. Green Building Council will make versions available for O+M, BD+C, and ID+C first. Cities and Communities, and Residential will be available during the spring.

LEED v4.1 is more inclusive with updated referenced standards, and allows projects to earn LEED points through building performance monitoring, according to USGBC. “Lessons learned from those in the market using LEED v4 and over the last twenty years have led us to take a deeper look at existing buildings, residential projects and cities to develop unique solutions that address unique markets,” the council says.

The new version of BD+C will include:

· Energy metrics that include both cost and greenhouse gas emissions (a first for LEED)

· Upgrade to ASHRAE 90.1-2016

· Applicable and achievable credit requirements throughout the rating system. For example, updated Rainwater Management requirements with a lower minimum percentile storm events and added guidance for zero-lot-line projects

· A new Renewable Energy credit that better addresses diverse methods of renewables procurement and evolving global renewables markets

Related Stories

Codes and Standards | Feb 24, 2022

Most owners adapting digital workflows on projects

Owners are more deeply engaged with digital workflows than other project team members, according to a new report released by Trimble and Dodge Data & Analytics.

Codes and Standards | Feb 21, 2022

More bad news on sea level rise for U.S. coastal areas

A new government report predicts sea levels in the U.S. of 10 to 12 inches higher by 2050, with some major cities on the East and Gulf coasts experiencing damaging floods even on sunny days.

Codes and Standards | Feb 21, 2022

New standard for ultraviolet germicidal irradiation

The Illuminating Engineering Society (IES) recently introduced the standard, ANSI/IES RP-44-21 Recommended Practice: Ultraviolet Germicidal Irradiation.

Wood | Feb 18, 2022

$2 million mass timber design competition: Building to Net-Zero Carbon (entries due March 30!)

To promote construction of tall mass timber buildings in the U.S., the Softwood Lumber Board (SLB) and USDA Forest Service (USDA) have joined forces on a competition to showcase mass timber’s application, commercial viability, and role as a natural climate solution.  

Codes and Standards | Feb 18, 2022

Proposal would make all new buildings in Los Angeles carbon-neutral

Los Angeles may become the next large city to ban fossil fuels from new construction if legislation recently introduced in the city council becomes law.

Codes and Standards | Feb 18, 2022

U.S. Army outlines ambitious renewable energy and decarbonization goals

Net-zero emissions in all procurements and a microgrid at every base among aims.

Codes and Standards | Feb 17, 2022

Pandemic won’t alter urban planning

City planners focused on returning to ‘old normal’.

Codes and Standards | Feb 16, 2022

California court rules affordable housing developers exempt from local zoning

Case could set precedent on state law that overrides local rules.

Codes and Standards | Feb 15, 2022

FORTIFIED resiliency standard expanded to include multifamily sector

Voluntary, beyond-code program aims to protect buildings from severe weather.

Codes and Standards | Feb 10, 2022

Number of Americans at risk of flooding to double in 30 years

Most new risk from new development, not climate change.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021