flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

LED lighting helps cities receive Energy Star designation

LED lighting helps cities receive Energy Star designation

Los Angeles’s LED program instrumental in its top efficiency ranking


By BD+C Staff | May 8, 2014
Photo: Thomas Pintaric via Wikimedia Commons
Photo: Thomas Pintaric via Wikimedia Commons

Thanks largely to an ambitious program to boost the use of LED lighting in its buildings, Los Angeles is the top ranked U.S. city on the Environmental Protection Agency’s annual list of U.S. cities that are doing the most to improve energy efficiency.

Los Angeles took on the world’s largest LED lighting efficiency and energy savings project five years ago, and is saving millions on electricity as a result.      

Buildings that perform in the top 25% of similar structures in the United States are eligible for the Energy Star designation. Building owners/managers need to verify that level of performance independently. Energy Star buildings typically use an average of 35% less energy than those like them, along with a corresponding reduction in carbon dioxide emissions.

Commercial, institutional, and government buildings can earn Energy Star recognition. Many of the Energy Star buildings have undergone LED lighting retrofits or installed smart meters and dashboards that track energy usage.

For example, Mercy Philadelphia Hospital installed LEDs in all of its exit signs, along with sensors, timers, photo light controls and motion detectors. The hospital reduced electric consumption to about 9.86 million kilowatt-hours (kWhs) in 2013, compared with 10.2 million kWhs in 2012. The resulting savings is about $20,534 per year.

(http://www.forbes.com/sites/heatherclancy/2014/04/28/led-retrofits-energy-measurement-common-themes-for-top-energy-star-cities/#./?&_suid=139888770054203471881808318945

Related Stories

| Sep 26, 2012

OSHA fines on fall-protection violations challenged by New York contractor

A New York masonry contractor is contesting an OccupationalSafety and Health Administration $136,290 fine for violations of fall-protection standards.a

| Sep 26, 2012

Construction workplace deaths decline nearly 7% in 2011

There were 721 construction-workplace deaths in 2011, according to the Bureau of Labor Statistics, down 6.8% from 2010.

| Sep 26, 2012

Contractors save $9 billion due to revised California emissions rule

The California Air Resources Board made changes to a rule limiting off-road diesel emissions that could result in contractors saving about $9 billion.

| Sep 20, 2012

Smithtown, N.Y. considers bigger fines for building code violations

After a Suffolk County grand jury recommended stiffer fines for illegal demolitions, Smithtown, NY officials are weighing tougher penalties for developers who violate the town building code.

| Sep 20, 2012

AGC awarded federal grant to provide fall-protection safety program

The Associated General Contractors of America will continue to provide fall protection safety training next year after being awarded a federal safety grant.

| Sep 20, 2012

East Lansing officials accused of ignoring unauthorized project that led to partial building collapse

The unauthorized construction of a fifth-floor penthouse on a downtown East Lansing, Mich. mixed-use development led to a partial building collapse earlier this year.

| Sep 20, 2012

Reflective roofs could reduce rainfall in Arizona

Green standards may have to take into account the impact of reflective roofs on rainfall in the desert Southwest.

| Sep 20, 2012

Earth Advantage Institute offers green certification for small commercial buildings

Earth Advantage Institute announced a new green building certification aimed at new or substantially remodeled small commercial buildings built to green standards.

| Sep 14, 2012

To create more pedestrian-friendly neighborhoods, Chicago unveils safety plan

As more urban mixed-use and residential developments aim to encourage residents to walk and use mass transit, cities are addressing pedestrian safety.

| Sep 14, 2012

Worker killed in Brooklyn building collapse; overloaded floor decking blamed

One worker was killed after he and others plunged 40 feet through an unfinished upscale Brooklyn townhouse building.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021