Thanks largely to an ambitious program to boost the use of LED lighting in its buildings, Los Angeles is the top ranked U.S. city on the Environmental Protection Agency’s annual list of U.S. cities that are doing the most to improve energy efficiency.
Los Angeles took on the world’s largest LED lighting efficiency and energy savings project five years ago, and is saving millions on electricity as a result.
Buildings that perform in the top 25% of similar structures in the United States are eligible for the Energy Star designation. Building owners/managers need to verify that level of performance independently. Energy Star buildings typically use an average of 35% less energy than those like them, along with a corresponding reduction in carbon dioxide emissions.
Commercial, institutional, and government buildings can earn Energy Star recognition. Many of the Energy Star buildings have undergone LED lighting retrofits or installed smart meters and dashboards that track energy usage.
For example, Mercy Philadelphia Hospital installed LEDs in all of its exit signs, along with sensors, timers, photo light controls and motion detectors. The hospital reduced electric consumption to about 9.86 million kilowatt-hours (kWhs) in 2013, compared with 10.2 million kWhs in 2012. The resulting savings is about $20,534 per year.
Related Stories
| Nov 26, 2012
How to boost resilient systems that are sustainable
Cities of the future can be both more resilient and more sustainable by promoting strategies that include solar power and green roofs, programs that minimize demand for energy, rain gardens, and permeable pavement.
| Nov 26, 2012
Developer of nation’s first LEED platinum skyscraper focuses on carbon reduction
The Durst Organization, the developer of the first LEED platinum certified skyscraper in the country, says it will not seek LEED certification for its residential pyramid planned for New York’s West 57th Street.
| Nov 26, 2012
Questions linger over ability of Miami's newer high-rises to withstand hurricanes
Some towers in Miami, rebuilt after a hurricane in 2005, were allowed to be constructed under older building codes instead of newer ones created after Hurricane Wilma.
| Nov 26, 2012
Changes in development and building standards needed for health of Potomac River
The Potomac River’s health stands to suffer if the region does not change its development and building standards, according to the Potomac Conservancy.
| Nov 16, 2012
South Dakota prefers LEED over building code on state projects
“(LEED is) much better than a mandatory building code because you get a little wiggle room in these projects,” said Mike Mueller, a spokesman for the South Dakota Bureau of Administration.
| Nov 16, 2012
AAMA publishes quality assurance guidelines for Polyamide Thermal Barriers
The American Architectural Manufacturers Association (AAMA) has published QAG-2-12, Voluntary Quality Assurance Processing Guide for Polyamide Thermal Barriers.
| Nov 16, 2012
New ANSI/BIFMA standards developed for educational seating
The American National Standards Institute (ANSI) has approved the newly developed safety and performance standard for educational seating: ANSI/BIFMA X6.1-2012—the first of its kind.