flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

LED lighting helps cities receive Energy Star designation

LED lighting helps cities receive Energy Star designation

Los Angeles’s LED program instrumental in its top efficiency ranking


By BD+C Staff | May 8, 2014
Photo: Thomas Pintaric via Wikimedia Commons
Photo: Thomas Pintaric via Wikimedia Commons

Thanks largely to an ambitious program to boost the use of LED lighting in its buildings, Los Angeles is the top ranked U.S. city on the Environmental Protection Agency’s annual list of U.S. cities that are doing the most to improve energy efficiency.

Los Angeles took on the world’s largest LED lighting efficiency and energy savings project five years ago, and is saving millions on electricity as a result.      

Buildings that perform in the top 25% of similar structures in the United States are eligible for the Energy Star designation. Building owners/managers need to verify that level of performance independently. Energy Star buildings typically use an average of 35% less energy than those like them, along with a corresponding reduction in carbon dioxide emissions.

Commercial, institutional, and government buildings can earn Energy Star recognition. Many of the Energy Star buildings have undergone LED lighting retrofits or installed smart meters and dashboards that track energy usage.

For example, Mercy Philadelphia Hospital installed LEDs in all of its exit signs, along with sensors, timers, photo light controls and motion detectors. The hospital reduced electric consumption to about 9.86 million kilowatt-hours (kWhs) in 2013, compared with 10.2 million kWhs in 2012. The resulting savings is about $20,534 per year.

(http://www.forbes.com/sites/heatherclancy/2014/04/28/led-retrofits-energy-measurement-common-themes-for-top-energy-star-cities/#./?&_suid=139888770054203471881808318945

Related Stories

| Apr 24, 2013

New Mexico court strikes down move to repeal energy codes

The New Mexico State Court of Appeals struck down an attempt to repeal energy-efficient building codes.

| Apr 24, 2013

Los Angeles may add cool roofs to its building code

Los Angeles Mayor Antonio Villaraigosa wants cool roofs added to the city’s building code. He is also asking the Department of Water and Power (LADWP) to create incentives that make it financially attractive for homeowners to install cool roofs.

| Apr 17, 2013

Army's FY 2014 $130 billion budget includes $2.3 billion for construction

The U.S. Army submitted a $129.7 billion budget for fiscal year 2014, $2.3 billion of which is allocated for military construction, army family housing, and base realignment and closure.

| Apr 17, 2013

Leonardo Academy to develop sustainability master plan standard

Leonardo Academy launched the development of a standard for sustainability master plans using the American National Standards Institute (ANSI) process to define sustainability goals and achievements for regions, states and campuses.

| Apr 17, 2013

Fenestration Council allows some shading system, dynamic glazing to be rated for U-Factor

The National Fenestration Rating Council (NFRC) approved changes to its NFRC 100 and NFRC 200 standards, allowing certain shading devices to be rated for U-factor and Solar Heat Gain Coefficient.

| Apr 17, 2013

LEED 2009 quarterly interpretations, addenda now available

Quarterly interpretations and addenda to the LEED 2009 rating systems and reference guides are now available.

| Apr 17, 2013

DOE’s Lawrence Berkeley Lab researchers developing new indoor air pollution standards

The U.S. Department of Energy’s Lawrence Berkeley National Laboratory (Berkeley Lab) researchers are working on new building standards after discovering previously unknown indoor air pollutants.

| Apr 16, 2013

RMJM acquired by Duthus Investments for £12 million

  Sir Fraser Morrison, the owner and chairman of architect RMJM, is the backer behind the investment firm that bought RMJM for £11m in late March.

| Apr 10, 2013

ASHRAE publishes second edition to HVAC manual for healthcare facilities

The American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) has published a second edition of its “HVAC Design Manual for Hospitals and Clinics.”

| Apr 10, 2013

Concrete Reinforcing Steel Institute accredited by ANSI as standards developer

The Concrete Reinforcing Steel Institute (CRSI) was recently accredited by the American National Standards Institute (ANSI) as an ANSI Accredited Standards Developer (ASD).

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021