The City of Los Angeles recently passed an ordinance requiring buildings of 20,000 sf or more to take steps to improve energy and water efficiency.
Structures of that size must:
- Benchmark their use of energy and water consumption
- Provide this information to the Los Angeles Department of Building and Safety
- Demonstrate steps being taken to reduce energy and water consumption
In L.A., 4% of the city's buildings are responsible for half of the total energy used in the city, so this ordinance could have a significant impact on consumption. Building owners must benchmark their energy and water use using the ENERGY STAR Portfolio Manager.
Facilities will be able to compare their use of energy and water to comparably sized buildings. The ordinance also lets building owners know about and take advantage of tax incentives that help reduce consumption.
“The program will be phased in over the next two years and while it is somewhat involved, there are many benefits to building owners,” says Klaus Reichardt, Founder, and CEO of Waterless Co., a manufacturer of no-water urinals and other restroom products.
Related Stories
Codes and Standards | May 15, 2018
Blast testing of loaded mass timber structures yields positive results
Four tests covered a spectrum of blast loads.
Codes and Standards | May 14, 2018
Maryland makes general contractors liable for failure of subs to pay employees
GCs could have to pay for up to three times the wages owed.
Codes and Standards | May 10, 2018
Data collection, machine learning boost building efficiency
Sensors, software algorithms squeeze out waste.
Codes and Standards | May 9, 2018
OSHA and state safety agencies write more than 100 silica citations in 6 months
Actions tending to come with investigation of other site conditions.
Codes and Standards | May 8, 2018
Powerhouse coalition builds energy positive buildings
The goal: build buildings that provide more power than they cost to build, run, and demolish.
Codes and Standards | May 7, 2018
Plan advances in Los Angeles for Climate Emergency Mobilization Department
Would oversee efforts to reduce greenhouse gas emissions across the city.
Codes and Standards | May 3, 2018
Data collection, machine learning boost building efficiency
Sensors, software algorithms squeeze out waste.
Codes and Standards | May 2, 2018
Energy Department releases Updated EnergyPlus and OpenStudio building energy modeling tools
The tools can now accept input in epJSON format.
Codes and Standards | May 1, 2018
ASHRAE publishes new energy simulation-aided design standard
Requires building energy modeling during schematic design.
Codes and Standards | Apr 30, 2018
CALGreen projects pre-approved for streamlined LEED v4 requirements
Reduces need to run additional energy models.
