The International Code Council (ICC) and the Modular Building Institute (MBI) have published two new off-site construction standards.
ICC/MBI 1200-2021 Standard for Off-Site Construction: Planning, Design, Fabrication and Assembly and ICC/MBI 1205-2021 Standard for Off-Site Construction: Inspection and Regulatory Compliance are intended to promote consistency around the globe of regulatory requirements for off-site construction processes, according to a news release from the two organizations. The standards are expected to accelerate the off-site construction industry, the release says.
“The Code Council family already offers multiple solutions to support the safe and efficient use of off-site construction. However, as we continue seeing a surge in global demand for off-site construction, we knew more guidance would be necessary, to add consistency to a global market,” said Dominic Sims, CBO, CEO, International Code Council. “The new standards align perfectly with the Code Council’s mission to ensure building safety. The standards are also part of our commitment to encourage affordability—in this case by lowering the regulatory barriers to trade—that off-site products often face by having to navigate a patchwork of regional regulations.”
The expanded use of off-site construction, often called modular or prefabrication, can address industry challenges including workforce availability, housing affordability, job site safety, building quality, and sustainability, the release says.
Related Stories
Codes and Standards | Dec 8, 2021
Proposals to add more multifamily to Atlanta prompt drive for Buckhead to secede
City aims to increase housing as projections point to sharp population increase.
Codes and Standards | Dec 7, 2021
Design problems now the primary cause of construction claims and disputes
More likely to occur due to more tight timescales imposed upon third parties engaged in design.
Codes and Standards | Dec 5, 2021
New standard for Phase I environmental reports requires more research work on many sites
Update affects around 250,000 commercial real estate transactions a year.
Codes and Standards | Nov 30, 2021
Dept. of Energy publishes RFP for technical assistance on supporting better building codes
Addresses advanced standards to reduce energy consumption and GHG emissions.
Codes and Standards | Nov 29, 2021
Ithaca, N.Y., votes to electrify, decarbonize all its buildings
First initiative of its kind in U.S.
Codes and Standards | Nov 29, 2021
FAA seeking design of air traffic control towers of the future
Call for design submissions for safe, efficient structures.
Codes and Standards | Nov 28, 2021
Efficient electric water heaters in multifamily buildings significantly reduce carbon emissions
In buildings with 5+ units, water heating uses more energy than space heating, cooling, or lighting.
Codes and Standards | Nov 23, 2021
New York’s Labor Law Section 240 and how it affects general contractors
The ‘Scaffold Law’ was first enacted by the New York State Legislature in 1885 and is one of the single most-used laws in construction accident cases.
Codes and Standards | Nov 22, 2021
ABC’s Construction Technology Report finds focus on solving operational problems
More than half rely on project management software.
Codes and Standards | Nov 22, 2021
Contractors say 811 utility location system has significant flaws
More than half of firms in survey report damages, near misses because lines were unmarked or marked incorrectly.
