The International WELL Building Institute has launched the WELL Building Standard Version 1.0, which focuses on enhancing people’s health and well-being through the built environment.
The standard is third-party certified through International Well Building Institute’s collaboration with the Green Building Certification Institute, which administers more than 10 billion sf of LEED buildings and the LEED AP program globally. This collaboration ensures that WELL works with LEED.
The release follows a two-year pilot program and peer review process. WELL v1.0 sets performance requirements in seven categories relevant to occupant health and well-being: air, water, nourishment, light, fitness, comfort, and mind.
The standard can be applied to new construction and major renovations of commercial and institutional buildings, tenant improvements, and core and shell developments. To date, about 7.7 million sf of commercial, institutional and multifamily real estate has been registered for certification through WELL.
(http://www.environmentalleader.com/2014/10/21/well-building-standard-launched/)
Related Stories
Codes and Standards | Apr 27, 2016
Florida gives developers more time to install first responder radio signal systems
Expensive upgrades can be postponed for several years.
Codes and Standards | Apr 25, 2016
San Francisco becomes first big U.S. city to require solar panels on new buildings
Pertains to commercial and residential buildings shorter than 10 stories.
Codes and Standards | Apr 25, 2016
GSA adopts SITES land development and management rating system
Federal agency will use for properties with and without buildings.
Wood | Apr 22, 2016
Revised 2015 Manual for Engineered Wood Construction available
American Wood Council Document offers design information for structural applications.
Codes and Standards | Apr 20, 2016
OSHA updates eye and face protection standards in final rule
Becomes effective April 26.
Codes and Standards | Apr 18, 2016
Efficiency finance pilot project to spur retrofits on existing buildings
EDF and PG&E team up on interest-free loans for qualified projects.
Codes and Standards | Apr 18, 2016
ASHRAE releases proposed energy standard for historic buildings
Designed to balance with preservation requirements.
Codes and Standards | Apr 13, 2016
Canadian city fines itself for failing to get a building permit for building renovation
Guelph, Ontario, will pay a $1,125 fine to the province.
Codes and Standards | Apr 12, 2016
Construction trade groups sue OSHA over silica rule
Cite concerns about technological and economic feasibility.
Codes and Standards | Apr 11, 2016
New LEED 2009 projects will have to meet increased minimum energy performance
New requirements went into effect April 8.
