flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

International Construction Measurement Standards draft released

Codes and Standards

International Construction Measurement Standards draft released

The goal is to improve consistency for calculating costs and reducing risk.


By Peter Fabris, Contributing Editor | December 5, 2016

Pixabay Public Domain

In November, the International Construction Measurement Standards (ICMS) was released for public comment.

ICMS Coalition, a group of over 40 professional bodies, is asking for professionals to support the project that seeks to develop a new approach to calculate costs for the world’s building and civil engineering projects. The aim is to devise a universal system for measuring the cost of construction projects to allow comparisons to be made on a like-for-like basis between countries.

Today, the way construction project costs are measured varies significantly from country to country, hampering decision making and creating barriers to investment. All stakeholders in the construction and infrastructure sectors are invited to comment on the draft standard.

“This draft international standard presents huge opportunities for the global cost management profession,” says Ong See Lian, Chair of the ICMS Coalition SSC. “We’ve worked hard to get the new standard to this point and we now need to hear from cost consultants, quantity surveyors and civil engineers around the world.”

Related Stories

Codes and Standards | Dec 8, 2021

Proposals to add more multifamily to Atlanta prompt drive for Buckhead to secede

City aims to increase housing as projections point to sharp population increase.

Codes and Standards | Dec 7, 2021

Design problems now the primary cause of construction claims and disputes

More likely to occur due to more tight timescales imposed upon third parties engaged in design.

Codes and Standards | Dec 5, 2021

New standard for Phase I environmental reports requires more research work on many sites

Update affects around 250,000 commercial real estate transactions a year.

Codes and Standards | Nov 30, 2021

Dept. of Energy publishes RFP for technical assistance on supporting better building codes

Addresses advanced standards to reduce energy consumption and GHG emissions.

Codes and Standards | Nov 29, 2021

FAA seeking design of air traffic control towers of the future

Call for design submissions for safe, efficient structures.

Codes and Standards | Nov 28, 2021

Efficient electric water heaters in multifamily buildings significantly reduce carbon emissions

In buildings with 5+ units, water heating uses more energy than space heating, cooling, or lighting.

Codes and Standards | Nov 23, 2021

New York’s Labor Law Section 240 and how it affects general contractors

The ‘Scaffold Law’ was first enacted by the New York State Legislature in 1885 and is one of the single most-used laws in construction accident cases.

Codes and Standards | Nov 22, 2021

ABC’s Construction Technology Report finds focus on solving operational problems

More than half rely on project management software.

Codes and Standards | Nov 22, 2021

Contractors say 811 utility location system has significant flaws

More than half of firms in survey report damages, near misses because lines were unmarked or marked incorrectly.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021