A partnership composed of Johnson Controls, CBRE, World Resources Institute (WRI), and Lawrence Berkeley National Laboratory was recently launched to test and deploy an open-source, web-based energy analysis tool to identify energy efficient retrofit opportunities in commercial buildings.
Johnson Controls developed the LEAN energy analysis technology over the past eight years, and has used the tool to analyze retrofit opportunities in over 700 buildings. Berkeley Lab is working with Johnson Controls to automate and improve the tool and create an open-source version for public use.
CBRE will be an initial deployment partner, using the tool to help their enterprise customers target cost-effective energy efficiency retrofit opportunities across their real estate portfolios. WRI will use the open-source tool to help local governments around the world target the best opportunities for retrofitting public and private buildings within their jurisdictions.
“We believe this initiative will help drive greater investment in energy efficiency by turning readily available, monthly building energy consumption data into specific, cost-effective recommendations for improvement,” said Clay Nesler, vice president, global sustainability and regulatory affairs, Johnson Controls. An alpha version of the open-source LEAN energy analysis tool is available on GitHub at https://github.com/LBNL-JCI-
Related Stories
| Oct 3, 2013
Arizona utility pushes for change in building codes to boost efficiency on all commercial projects
Many large construction projects in Arizona are going green by paying attention to energy efficiency, but smaller buildings that are often rented out haven't yet jumped on the bandwagon.
| Oct 3, 2013
Bipartisan energy efficiency bill stalled; may not be revived this year
The Senate spent the first two weeks of September trying to pass bipartisan energy efficiency legislation, commonly known as Shaheen-Portman (S. 1392) that would have impacted building codes.
| Oct 3, 2013
LEED credential exams will feature LEED v4 material beginning next spring
The LEED Professional Credential exams for the LEED Green Associate and LEED AP with specialty designations will feature LEED v4 material beginning in late spring 2014.
| Sep 26, 2013
Ballot period on National CAD Standards open until Oct. 13
The Ballot Comment Period to update the nation’s leading computer-aided design (CAD) standard is now open.
| Sep 26, 2013
OSHA encourages comments on respirable crystalline silica rules
The Occupational Safety and Health Administration’s proposed rulemaking for respirable crystalline silica has been published in the Federal Register.
| Sep 26, 2013
EPA’s final rule on updated ASTM standard likely to be withdrawn
The Environmental Protection Agency is expected to withdraw a direct final ruleissued in Augustregarding an ASTM standard for Phase I Environmental Site.
| Sep 26, 2013
A primer on RoofPoint green-rating system for commercial roofs
The RoofPoint green-rating system can be used to construct more energy-efficient and sustainable commercial roofs.
| Sep 26, 2013
ConsensusDocs releases updated federal subcontract to help construction firms perform federal work
The newly revised ConsensusDocs standard subcontract (ConsensusDocs 752 for federal work) will make it easier for general contractors and subcontractors to perform federal work.
| Sep 18, 2013
Proposed Boston casino development approval will depend partly on sustainability
The movement toward green building has been slow to catch on in the casino industry, but that could change with Suffolk Downs, which plans to build a $1 billion casino in Boston.
| Sep 18, 2013
Regulations could ease firefighters’ fear of roof solar panels
The local fire chief says solar panels are partly to blame after a 300,000 sf refrigerated warehouse in Delanco, N.J., burned down.