flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Industry Groups move toward Unified Green Building Model Code in 2018

Codes and Standards

Industry Groups move toward Unified Green Building Model Code in 2018

The effort involves combining ASHRAE's Standard 189.1 with the International Green Construction Code.


By Peter Fabris, Contributing Editor | May 30, 2017
Industry Groups move toward Unified Green Building Model Code in 2018

Photo: Pixabay

An alliance of building industry groups is working to unify ASHRAE's Standard 189.1 for High-Performance Green Buildings with ICC's International Green Construction Code (IgCC) into a single model code.

The American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE), the International Code Council (ICC), the American Institute of Architects (AIA), the Illuminating Engineering Society, and the U.S. Green Building Council (USGBC) are involved in the project. The integrated document is known as the “IgCC powered by 189.1.”

The document will be designated the 2018 version of the IgCC, and will be published in the summer of 2018. The objective is to provide basic criteria for energy efficiency, resource conservation, water safety, land use, site development, indoor environmental quality, and building performance that can be widely adopted.

Local jurisdictions will be able to use this model as a platform for new regulatory mandates. ASHRAE's process for proposed changes to the standard will wrap up this summer. Final addenda are undergoing public review now.

Related Stories

| May 17, 2012

New standard for Structural Insulated Panels under development

ASTM International and NTA, Inc. are developing a new standard for Structural Insulated Panels (SIPs) that would create a path for U.S. manufacturers to meet the requirements of the Canadian building code.

| May 17, 2012

Webinar: ‘What Energy Codes and Standards Are Adopted Where and by Whom’

A June 12 webinar by the Construction Specifications Institute will outline what energy codes and standards have been adopted in each of the states for commercial buildings, and what is anticipated to be adopted in the future.

| May 17, 2012

California Governor orders new green standards on state buildings

California Gov. Jerry Brown issued an executive order recently that calls for all new or renovated state buildings of more than 10,000 sf to achieve LEED Silver or higher and incorporate clean, onsite power generation.

| May 17, 2012

New Zealand stadium roof collapse blamed on snow, construction defects

Heavy snowfall, construction defects, and design problems contributed to the collapse of the Stadium Southland roof in New Zealand in September 2010, a report has found.

| May 17, 2012

OSHA launches fall prevention campaign

The Occupational Safety and Health Administration (OSHA) recently launched an educational campaign to prevent deadly falls in the construction industry.

| May 15, 2012

Suffolk selected for Rosenwald Elementary modernization project

The 314-student station elementary school will undergo extensive modernization.

| May 10, 2012

Chapter 6 Energy Codes + Reconstructed Buildings: 2012 and Beyond

Our experts analyze the next generation of energy and green building codes and how they impact reconstruction.

| May 10, 2012

Resilience should be considered a sustainability factor

Since a sustainable building is one you don't have to rebuild, some building sustainability experts believe adding points for "resilience" to storms and earthquakes to the LEED sustainability rating tool makes sense.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021