Major building industry groups the International Code Council (ICC), ASHRAE, the American Institute of Architects (AIA), the Illuminating Engineering Society of North America (IES), and the U.S. Green Building Council (USGBC) have agreed to collaborate on the development of Standard 189.1, the International Green Construction Code (IgCC), and the LEED green building program.
The groups aim to create a comprehensive framework for jurisdictions looking to implement and adopt green building regulations and codes and/or provide incentives for voluntary programs such as LEED. The agreement outlines the development, maintenance, and implementation of new versions of ANSI/ASHRAE/IES/USGBC Standard 189.1, Standard for the Design of High-Performance, Green Buildings Except Low-Rise Residential Buildings, and the IgCC, which will be combined into one regulatory tool. The agreement sets out to align the LEED program with the new code to ensure a streamlined, effective set of regulatory and above-code options for states and communities.
“This agreement, which underscores the AIA’s dedication to sustainable design and construction, should lead to more rapid adoption of responsible approaches by designers, builders, developers and a host of other building industry groups,” said AIA CEO Robert Ivy, FAIA.
“ASHRAE sees this as a move forward in green building, reducing fragmentation of compliance documents for users who are pressing toward a more sustainable environment,” ASHRAE President Tom Phoenix said.
(http://us5.campaign-archive2.com/?u=ca55cb2e5c853bc823c1f59af&id=4cfd82f2f0&e=e4f9394553)
Related Stories
Codes and Standards | Dec 8, 2021
Proposals to add more multifamily to Atlanta prompt drive for Buckhead to secede
City aims to increase housing as projections point to sharp population increase.
Codes and Standards | Dec 7, 2021
Design problems now the primary cause of construction claims and disputes
More likely to occur due to more tight timescales imposed upon third parties engaged in design.
Codes and Standards | Dec 5, 2021
New standard for Phase I environmental reports requires more research work on many sites
Update affects around 250,000 commercial real estate transactions a year.
Codes and Standards | Nov 30, 2021
Dept. of Energy publishes RFP for technical assistance on supporting better building codes
Addresses advanced standards to reduce energy consumption and GHG emissions.
Codes and Standards | Nov 29, 2021
Ithaca, N.Y., votes to electrify, decarbonize all its buildings
First initiative of its kind in U.S.
Codes and Standards | Nov 29, 2021
FAA seeking design of air traffic control towers of the future
Call for design submissions for safe, efficient structures.
Codes and Standards | Nov 28, 2021
Efficient electric water heaters in multifamily buildings significantly reduce carbon emissions
In buildings with 5+ units, water heating uses more energy than space heating, cooling, or lighting.
Codes and Standards | Nov 23, 2021
New York’s Labor Law Section 240 and how it affects general contractors
The ‘Scaffold Law’ was first enacted by the New York State Legislature in 1885 and is one of the single most-used laws in construction accident cases.
Codes and Standards | Nov 22, 2021
ABC’s Construction Technology Report finds focus on solving operational problems
More than half rely on project management software.
Codes and Standards | Nov 22, 2021
Contractors say 811 utility location system has significant flaws
More than half of firms in survey report damages, near misses because lines were unmarked or marked incorrectly.
