flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Increasingly tech-enabled construction industry powers forward despite volatility

Market Data

Increasingly tech-enabled construction industry powers forward despite volatility

Construction industry momentum to carry through first half of 2019.


By JLL | February 13, 2019

Courtesy Pixabay

Strong construction momentum will easily carry through the first half of 2019, despite project margins facing pressure from all sides. JLL’s Construction Outlook finds robust U.S. economic fundamentals will drive further growth of the sector, which in 2018 recorded a 5.1% increase in total construction value and a 4.5% increase in employment.

Potential risks to the construction sector such as trade war escalation, deteriorating macroeconomic conditions and the worsening labor shortage, are largely balanced by potential boosts that include a large-scale federal infrastructure package, relief from tariffs and the continuation of 3.5% annual GDP growth.

“All forward indicators for construction are still flashing green,” said Todd Burns, President, Project and Development Services, JLL Americas. “However, a year with growth equal to that of 2018 would be considered a success, given concerns of a broader economic slowdown.”

 

Rising construction costs will sideline select projects

Total building costs, which includes labor, materials and equipment, grew by 3.4% in 2018, outpacing the U.S. inflation rate of 1.9%. The widening spread between cost growth and inflation is pushing borderline projects past the threshold of profitability. Building costs will continue to increase in 2019 but at a slower rate than 2018. This reflects an expected cooldown in material pricing but the surging cost of labor.

Growth in total construction employment has hovered between 3 and 6% over the past six years – a far cry from what’s required for labor supply to catch up with demand. With a tight national employment market, the situation is unlikely to improve anytime soon. Construction wage growth in 2019 will top the 3.4% increase seen last year.

 

Trade policy a powerful “swing” force

With a direct impact on commodity prices, tariffs represent a uniquely immediate threat to an industry that typically moves slowly. Given the well-established political willingness to impose tariffs and the widening trade deficit with China, a continuation of tariffs in 2019 is expected.

The biggest chance for relief from tariffs are international trade deals that would lift tariffs in exchange for other trade or economic concessions. Such a deal could represent a dramatic positive for construction and is a potential bright spot for the industry.

 

Construction tech in growth mode, presents opportunity for labor shortage relief

The buzz around construction technology has long eclipsed actual adoption in the industry. The past year, however, saw meaningful gains fueled by large general contracting firms racing to improve productivity and remain competitive. High levels of tech adoption will spread to smaller firms, and elements of construction tech will become the standard across the industry in 2019. Amid intense labor pressures, contractors’ most common reason for making technology investments is to increase labor productivity.

Modular construction is poised to have the biggest long-term impact on the industry. Proponents of the technology envision a future full of dedicated warehouses churning out modular components – from exterior wall segments to entire apartment units – for most new construction.

“Adopting modular construction is not always as simple as it sounds,” said Henry D’Esposito, Senior Research Analyst, Project and Development Services, JLL. “There is often a prolonged period during which the benefits are not fully realized, as firms take time to adjust to the new system. Despite some of the initial challenges, there has been no hesitation among contractors about whether modular will continue to grow.”

Growth of modular construction in 2019 will be centered around increased use by select sectors, including hospitality and healthcare, and an increase in use for one or two select elements within a broader array of projects.

Related Stories

Market Data | Jun 19, 2020

7 must reads for the AEC industry today: June 19, 2020

Brown University's first housing building in three decades and demand for family rentals expected to jump.

Market Data | Jun 18, 2020

New data shows construction activity returning to pre-coronavirus levels in many parts of the country

Association survey and data collected by Procore measure impacts of the pandemic, showing signs of a construction recovery, but labor shortages and project cancellations show industry needs federal help.

Market Data | Jun 18, 2020

AIA releases strategies and illustrations for reducing risk of COVID-19 in schools

For the 2020-21 school year, districts are facing the difficult task of determining if K-12 schools will reopen this fall.

Market Data | Jun 18, 2020

6 must reads for the AEC industry today: June 18, 2020

Northbrook's new cannabis dispensary and America's structural steel industry remains a success story.

Market Data | Jun 17, 2020

6 must reads for the AEC industry today: June 17, 2020

Santa Fe becomes the second city in the world to achieve LEED v4.1 and the megacity is dead.

Market Data | Jun 16, 2020

7 must reads for the AEC industry today: June 16, 2020

Tottenham Hotspur Stadium has its own brewery and workers want policy changes before they return to offices.

Market Data | Jun 15, 2020

International Code Council offers guidance on building re-occupancy for reopening economies

Companies and building managers can access free resources at the Code Council’s Coronavirus Response Center.

Market Data | Jun 12, 2020

6 must reads for the AEC industry today: June 12, 2020

How will museums change in the face of COVID-19 and the patriarch of The Boldt Company dies.

Market Data | Jun 11, 2020

5 must reads for the AEC industry today: June 11, 2020

Istanbul opens largest base-isolated hospital in the world and AIA issues tools for reducing risk of COVID-19 transmission in buildings.

Market Data | Jun 10, 2020

6 must reads for the AEC industry today: June 10, 2020

Singapore's newest residential district and CannonDesign unveils COVID Shield.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021