After prolonged economic uncertainty, a majority of executives in the global engineering and construction sector have fresh confidence in the growth prospects for the industry, according to KPMG International's 2013 Global Construction Survey.
A general increase in backlogs and margins is giving cause for optimism across the industry, with further growth anticipated. Just over 50 percent of 165 C-level executives from the Americas; Europe, Middle East and Africa (EMEA); and Asia-Pacific (AsPac) regions said their companies experienced an increase in backlogs of at least 5 percent from 2012 to 2013. Moreover, though margins are not rising at the same rate as backlogs, 80 percent said their margins will either remain stable or increase more than 2 percent in the same period.
The Americas region had the highest confidence for growth with 90 percent forecasting margins as stable or increasing by more than 2 percent. By contrast, 28 percent of companies in the AsPac region see margins decreasing by fewer than 2 percent.
"Our 2013 survey shows the overall outlook in the industry is directionally positive," said Geno Armstrong, global leader of KPMG's Engineering and Construction practice. "A higher level of confidence in the Americas, demonstrated by large margin growth, is an indication of greater efficiency and cost management."
Looking at growth forecasts for 2013, optimism pervades with 64 percent expecting growth up to 25 percent. The highest growth is expected in Central and South America, and Africa. KPMG's Armstrong attributes the growth to "favorable trading conditions in the regions, as well as good prospects for mining, oil and natural gas." And, overall, companies with revenues greater than US$5 billion see the greatest potential for growth.
Drivers and Barriers to Growth
Government infrastructure plans (66 percent) were most frequently cited as the leading driver for growth, followed by global economic growth (42 percent) and population growth (38 percent).
In the Americas, privatization efforts via public-private partnerships (48 percent) and access to new energy sources such as natural gas or renewables (42 percent) ranked as the leading drivers for growth behind government infrastructure plans (58 percent).
Even with resurging optimism, many companies maintain a balanced view on what the likely obstacles to growth might be, with budget deficits and public funding shortages being the overwhelming factor, according to 72 percent of executives. Private-sector financing (43 percent) ranked second among respondents.
As companies ramp up for growth, a near consensus (93 percent) said that their risk management programs have improved project performance. Yet, more than three-quarters of respondents said the underlying causes of underperforming projects were project delays, poor estimating practices and failed risk management processes.
Expansion Plans -- New Geographies and Sectors
In anticipation of continued growth, 47 percent of respondents said their companies are making plans for international expansion into new regions. Africa (35 percent), U.S./Canada (28 percent), and the Middle East (22 percent) are the leading regional targets for expansion. Entering new sub-sectors of the industry is also in the works for 44 percent of respondents, with the power sector (54 percent), water-related activities (28 percent), and mining (27 percent) the leading areas for planned investment.
"The power sector is, without question, presently attracting the most interest," said Armstrong. "With the increase in economic activity and the hyper-focus on energy security, it stands to reason that many players will see opportunity in this area. Power, as well as water, mining, and other resources will increasingly become a critical priority of the business agenda in this industry."
About the KPMG Survey
The survey was conducted in early 2013 through face-to-face interviews with 165 senior leaders -- many of them Chief Executive Officers -- from leading engineering and construction companies in 29 countries worldwide. Respondent representation was spread across the Americas (20 percent), EMEA (52 percent), and AsPac (28 percent).
About KPMG LLP
KPMG LLP, the audit, tax and advisory firm (www.kpmg.com/us), is the U.S. member firm of KPMG International Cooperative ("KPMG International"). KPMG International's member firms have 152,000 professionals, including more than 8,600 partners, in 156 countries.
Related Stories
| Dec 29, 2014
Spherical reflectors help spread daylight throughout a college library in Portland, Ore. [BD+C's 2014 Great Solutions Report]
The 40,000-sf library is equipped with four “cones of light,” spherical reflectors made from extruded aluminum that distribute daylight from the library’s third floor to illuminate the second. The innovation was named a 2014 Great Solution by the editors of Building Design+Construction.
| Dec 29, 2014
Hard hat equipped with smartglass technology could enhance job site management [BD+C's 2014 Great Solutions Report]
Smart Helmet is equipped with an array of cameras that provides 360-degree vision through its glass visor, even in low light. It was named a 2014 Great Solution by the editors of Building Design+Construction.
| Dec 29, 2014
Clayco lends operational support and financing to construction services startups [BD+C's 2014 Great Solutions Report]
Design-build firm Clayco has launched an investment arm called Treehouse Adventures to provide financing and operational infrastructure to startups, including those serving the AEC industry. The new venture was named a 2014 Great Solution by the editors of Building Design+Construction.
| Dec 29, 2014
Reef Worlds to build world’s largest underwater theme park for luxury resort [BD+C's 2014 Great Solutions Report]
Dubai is known for its gargantuan commercial building projects. The latest to be proposed is the world’s largest underwater theme park, designed and built by Reef Worlds. The project was named a 2014 Great Solution by the editors of Building Design+Construction.
| Dec 29, 2014
New data-gathering tool for retail designers [BD+C's 2014 Great Solutions Report]
Beacon technology personalizes smartphone messaging, creating a new information resource for store designers. It was named a 2014 Great Solution by the editors of Building Design+Construction.
| Dec 29, 2014
Leo A Daly's minimally invasive approach to remote field site design [BD+C's 2014 Great Solutions Report]
For the past six years, Leo A Daly has been designing sites for remote field stations with near-zero ecological disturbance. The firm's environmentally delicate work was named a 2014 Great Solution by the editors of Building Design+Construction.
| Dec 29, 2014
Wearable job site management system allows contractors to handle deficiencies with subtle hand and finger gestures [BD+C's 2014 Great Solutions Report]
Technology combines a smartglass visual device with a motion-sensing armband to simplify field management work. The innovation was named a 2014 Great Solution by the editors of Building Design+Construction.
| Dec 29, 2014
From Ag waste to organic brick: Corn stalks reused to make construction materials [BD+C's 2014 Great Solutions Report]
Ecovative Design applies its cradle-to-cradle process to produce 10,000 organic bricks used to build a three-tower structure in Long Island City, N.Y. The demonstration project was named a 2014 Great Solution by the editors of Building Design+Construction.
| Dec 29, 2014
14 great solutions for the commercial construction market
Ideas are cheap. Solutions are what count. The latest installment in BD+C's Great Solutions series presents 14 ways AEC professionals, entrepreneurs, and other clever folk have overcome what seemed to be insoluble problems—from how to make bricks out of agricultural waste, to a new way to keep hospitals running clean during construction.
| Dec 29, 2014
HealthSpot station merges personalized healthcare with videoconferencing [BD+C's 2014 Great Solutions Report]
The HealthSpot station is an 8x5-foot, ADA-compliant mobile kiosk that lets patients access a network of board-certified physicians through interactive videoconferencing and medical devices. It was named a 2014 Great Solution by the editors of Building Design+Construction.
