States lacking consistent statewide building codes are most vulnerable to the effects of hurricanes, according to the Insurance Institute for Business & Home Safety (IBHS) 2021 edition of Rating the States.
Georgia, New York, Maine, New Hampshire, Texas, Alabama, Mississippi, and Delaware, lack a mandatory statewide building code, and are therefore ranked as “poor” in hurricane resilience, the institute says. Some jurisdictions within those states fare better such as Alabama’s two coastal counties which have adopted stricter codes.
Florida ranked as the top spot for strongest building code, followed by Virginia. Rating the States is released every three years following the building code update cycle of the International Code Council (ICC) and tracks coastal states from Maine to Texas.
Massachusetts saw the largest decline of any state, coming in three points lower than in the 2018 edition because the state removed the wind-borne debris requirements for coastal areas.
Related Stories
| Nov 16, 2012
South Dakota prefers LEED over building code on state projects
“(LEED is) much better than a mandatory building code because you get a little wiggle room in these projects,” said Mike Mueller, a spokesman for the South Dakota Bureau of Administration.
| Nov 16, 2012
AAMA publishes quality assurance guidelines for Polyamide Thermal Barriers
The American Architectural Manufacturers Association (AAMA) has published QAG-2-12, Voluntary Quality Assurance Processing Guide for Polyamide Thermal Barriers.
| Nov 16, 2012
New ANSI/BIFMA standards developed for educational seating
The American National Standards Institute (ANSI) has approved the newly developed safety and performance standard for educational seating: ANSI/BIFMA X6.1-2012—the first of its kind.
| Nov 16, 2012
Green building councils in 62 countries expect 60% of their work to be green by 2015
More than half of the respondents to a survey of members of the Green Building Council in 62 countries expect green projects to comprise 60% of their work by 2015.
| Nov 16, 2012
Voters approve fewer construction ballot measures in 2012 than in 2008
Voters passed fewer ballot measures related to construction projects this year than they did in 2008, according to an analysis by the Associated General Contractors of America.
| Nov 9, 2012
New ANSI/BIFMA standard adds point for lower formaldehyde emissions
The ANSI/BIFMA e3-2012 Furniture Sustainability Standard now includes an additional point for furniture products that meet a new, lower formaldehyde emissions limit.
