The International Association of Plumbing and Mechanical Officials (IAPMO) recently held a technical committee meeting to address public comments on a new water efficiency and sanitation standard.
When published later this year, WE•Stand will be the nation’s only American National Standard devoted entirely to plumbing and water efficiency. The technical committee addressed these issues:
- Improved provisions for indoor water efficiency and landscape irrigation
- Appropriate permitting and cross-connection prevention requirements for alternate water systems
- Revisions to water heating design provisions allowing new fitting types that help to mitigate biofilm growth by providing improved scouring action in potable water pipes
- Inclusion of a revised, statistically based pipe sizing method for residential applications in the appendices that will support the use of a water demand calculator to assist plumbing system designers to more accurately size systems to be consistent with the lower flow rates and consumption values from water efficient plumbing fixtures and appliances
The final technical committee ballot to review public comments on the 2017 WE•Stand will begin on April 17 and conclude on May 15.
Related Stories
Resiliency | Sep 30, 2022
Designing buildings for wildfire defensibility
Wold Architects and Engineers' Senior Planner Ryan Downs, AIA, talks about how to make structures and communities more fire-resistant.
| Sep 30, 2022
Lab-grown bricks offer potential low-carbon building material
A team of students at the University of Waterloo in Canada have developed a process to grow bricks using bacteria.
| Sep 27, 2022
New Buildings Institute released the Existing Building Decarbonization Code
New Buildings Institute (NBI) has released the Existing Building Decarbonization Code.
| Sep 22, 2022
Gainesville, Fla., ordinance requires Home Energy Score during rental inspections
The city of Gainesville, Florida was recently recognized by the U.S. Dept. of Energy for an adopted ordinance that requires rental housing to receive a Home Energy Score during rental inspections.
| Sep 19, 2022
New York City construction site inspections, enforcement found ‘inadequate’
A new report by the New York State Comptroller found that New York City construction site inspections and regulation enforcement need improvement.
| Sep 16, 2022
Fairfax County, Va., considers impactful code change to reduce flood risk
Fairfax County, Va., in the Washington, D.C., metro region is considering a major code change to reduce the risk from floods.
| Sep 13, 2022
California building codes now allow high-rise mass-timber buildings
California recently enacted new building codes that allow for high-rise mass-timber buildings to be constructed in the state.
| Sep 8, 2022
U.S. construction costs expected to rise 14% year over year by close of 2022
Coldwell Banker Richard Ellis (CBRE) is forecasting a 14.1% year-on-year increase in U.S. construction costs by the close of 2022.
| Aug 29, 2022
Montana becomes first U.S. state to approve 3D printing in construction
Montana is the first U.S. state to give broad regulatory approval for 3D printing in building construction.
| Aug 25, 2022
New York City’s congestion pricing aims to reduce traffic, cut carbon
Officials recently released an environmental assessment that analyzes seven different possible pricing schemes for New York City’s congestion pricing program.
