flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

How your AEC firm can win more healthcare projects

How your AEC firm can win more healthcare projects

Cutthroat competition and the vagaries of the Affordable Healthcare Act are making capital planning a more daunting task than ever. Our experts provide inside advice on how AEC firms can secure more work from hospital systems.


By Peter Fabris, Contributing Editor | March 18, 2014
Alfond Center for Health, in Augusta, Maine, was fulfilled through a three-party
Alfond Center for Health, in Augusta, Maine, was fulfilled through a three-party IPD consisting of the owner, MaineGeneral Medic

Editor's note: This article was originally published as part of BD+C's two-part March 2014 Healthcare Facilities Report. Read the second installment of the report, "6 keys to better healthcare design."

 

 

Recent efforts to curb healthcare spending by the federal government and insurers appear to be working, something most Americans would say is a good thing—unless, of course, you’re the poor healthcare property management executive at a struggling healthcare provider.

Total U.S. spending on healthcare grew 3.7% in 2012, marking the fourth straight year of “low growth,” according to the Centers for Medicare & Medicaid Services (CMS). This compares with annual increases as high as 16% in past years, according to the CMS, which has been tracking healthcare costs since the 1960s.

According to the American Hospital Association:
• Medicare and Medicaid payments to hospitals have been cut by an estimated $113 billion since 2010.
• Underpayment by Medicare and Medicaid to U.S. hospitals reached $56 billion in 2012.
• U.S. hospitals provided $45.9 billion in uncompensated care in 2012.

Revenue projection is critical to capital expenditure planning, and uncertainty over how the Affordable Care Act will impact hospital reimbursements only adds to the complexity of the problem. If the law helps enough people get insurance, hospitals could get paid for care they now provide free to the uninsured. On the other hand, the ACA could send a flood of previously uninsured patients seeking expensive treatments that could strain capacity. 

5 Tips For Winning More Healthcare Work


TIP 1 - "We want the people who are handling our work to have some clout within the firm. If something unexpected happens and we need an all-out effort, we want people who can go to leadership and get resources committed. We also like firms that are able to devote resources to healthcare design research."  
— Bob McCoole, Senior Vice President, Facilities Resource Group, Ascension Health


TIP 2 - “During interviews, we only allow those directly involved in the project in the room. We don’t allow principals or marketing people—only PMs and superintendents. We don’t want marketing people trying to dazzle us. We also look for a good track record on safety and disruption avoidance.”  
— John A. Balzer, MSEM, Vice President, Facility Planning and Development, Froedtert & the Medical College of Wisconsin


TIP 3 - “When making a proposal, we like to see firms that understand the market at the campus, our competition, and the history and layout of the campus.”
— Jim Young, Director, Capital Project Management, CHE Trinity Health


TIP 4 - “Part of engaging well in the IPD process is having an enculturation of collaboration. Some firms and individuals don’t seem to have that, but over time, the number of firms that we are excusing from projects for that reason is shrinking.”
— Carl Scheuerman, FACHE, Director of Regulatory Affairs, Sutter Health


TIP 5 - “Architects need to keep their egos in check, be open-minded, and understand that there are going to be a whole lot more people developing the drawings than themselves. We have a draw-once strategy. We didn’t want to recreate drawings. Architects and fabricators sat side by side. Electricians and mechanics worked together as team.”
— Paul Stein, Chief Operating Officer, MaineGeneral Medical Center

Furthermore, the underlying goal of the ACA is to reward hospitals for improving quality of care, rather than paying providers for services no matter what the outcome for patients. Then there are the penalties. Last year, hospitals with readmission rates considered excessive began having their reimbursement rates trimmed. Next year, hospitals with high rates of hospital-acquired infections will start seeing their reimbursement rates cut even more severely. All this makes accurate forecasting of hospital space needs no better than semi-educated guesswork.

In a year or two, the reimbursement picture should become clearer. For now, healthcare facility planners can count on two things: 1) they need to help rein in costs as much as possible, particularly through greater efficiency, and 2) they need to do everything they can to improve patient outcomes. 

To get a boots-on-the-ground perspective, Building Design+Construction asked seven top healthcare industry capital planning executives for their views on how the upheaval in healthcare impacts capital planning, new construction, and renovations. Thought their institutions share some common coping strategies, each has different areas of emphasis. But there’s one thing all our experts agreed on: Capital is in short supply and is likely to get even tighter this year.

 

ASCENSION HEALTH: THE BUMPY ROAD TO OUTPATIENT SERVICES

Ascension Health is the nation’s largest Catholic and largest nonprofit healthcare system, with 1,500 locations in 23 states. For Ascension, the migration to same-day surgeries and procedures hovers like a specter over the organization’s facility planning.

“Everybody knows we as an industry need to move from the inpatient model to more of an outpatient model, but that doesn’t mean there is going to be a flood of capital available,” says Bob McCoole, who oversees Ascension’s facilities. Given the pressures to improve services on tighter budgets, McCoole sees a need for fundamental change in healthcare design. “If the facilities we design today look like what’s been built before, we’re not accomplishing anything,” he says. 

“We are scouring opportunities to lower costs in every area of the business,” says McCoole. McCoole and Ascension executives are striving to identify the appropriate level of contribution to cost reduction by the physical plant. On average, facilities account for 8-12% of overall healthcare expenditures, he points out, and there are several areas ripe for cost cutting.

At the top of the agenda: a systemwide review of all properties in order to consolidate facilities. Ascension has hired a real estate consulting firm to pore through its entire portfolio—hospitals, ambulatory centers, and medical offices—for consolidation opportunities. The consultant will also be looking to “comb leases for accuracy of terms” and to assess maintenance costs.

Also on tap: energy-efficiency retrofits, further development of design standards, and a review of the organization’s preferred design firm list for projects of more than $10 million. 

 

CHE TRINITY HEALTH: CONSOLIDATING TO COMPETE

Last May, Trinity Health merged with Catholic Health East, creating CHE Trinity Health, one of the nation’s largest Catholic healthcare systems. It has a presence in 20 states with 82 hospitals, 88 continuing care facilities, and home health and hospice programs.

The newly minted merger presents Jim Young, Capital Project Management Director, with the task of bringing the two cultures together. “Legacy Trinity,” as Young calls the pre-merger entity, “had a more centralized approach to capital project management and real estate.” Updating design standards for the merged organization is being looked at as a means to control costs, with a focus on stabilizing room size and expenditures on aesthetics.

 


Ascension Health’s 155,395-gsf, 64-bed St. Vincent’s HealthCare hospital, in Jacksonville, Fla. Building Team: HKS (architect), UHS Building Solutions (design-build firm), TLC Engineering for Architecture (MEP), Prosser Hallock (CE), TME Inc. (commissioning engineer), Miller Electric Co., W.W. Gay Mechanical Contractor, HBS Healthcare Building Solutions, and Brasfield & Gorrie (GC). The three-story tower has six ORs, 32 med/surg beds (orthopedics and neurology), a 24-bed general medical surgical floor, an eight-bed ICU, a 16-bay ED, a catheterization lab, and a check-in kiosk with palm scanner. Photo: Lans Stout

 

 

As much as cost cutting seems the right way to go, market forces also have to be plugged into the equation. “We’re in some very competitive markets where the state of competitors’ facilities is often at a high level,” says Young. “People interpret facility quality and appearance as an aspect of good healthcare.” So there is pressure to stay on par with what competitors are building where supported by a strong business case.

Another focus is energy savings upgrades, as well as an effort to boost efficiency on major renovations and new construction by using commissioning agents early in projects. Young says commissioning has already proven its worth on CHE Trinity projects.

 

SUTTER HEALTH: WINDING DOWN THE seismic SPENDING SPREE

Sutter Health serves more than 100 communities in Northern California with 21 hospitals and medical centers. The organization is in the latter stages of a huge construction program to comply with the California Hospital Seismic Safety Act, which was enacted in the wake of the deadly 1994 Northridge earthquake. 

“The Act pushed us a little bit further into the future than maybe we wanted,” says Carl Scheuerman, FACHE, Sutter’s Director of Regulatory Affairs. The law, which mandated stiff requirements for seismic resilience in hospital retrofits or new construction, pushed California hospitals to the forefront of the inpatient-to-outpatient trend. According to Scheuerman, “At the onset, the big question was should we take half-measures to retrofit buildings, or make major investments in new buildings?” It was determined that, in most cases, retrofits would merely have extended the life of outdated facilities at a high cost, so new construction was usually the chosen path.

With the hospital building spree winding down, “The lion’s share of capital is going to be spent on the ambulatory environment,” says Sutter Health’s Planning and Design Chief, Dan Conwell. Many of these projects will be for small, highly focused services often located in strip malls. Sutter will also roll out more “express care clinics” in supermarkets or drugstores to provide low-cost services closer to the customer.

 

MAINEGENERAL: FINDING EFFICIENCIES EVERYWHERE

When MaineGeneral’s new Alfond Center for Health opened last November, it more than doubled the inpatient capacity of the organization’s two existing hospitals. One of those facilities, the Thayer Center for Health, is undergoing a major renovation and conversion to an emergency and outpatient facility. The $322 million being spent on these two projects represents a once-in-a-lifetime opportunity to remake this small healthcare system centered in the capital city of Augusta.

 


Sutter Health Eden Medical Center, Castro Valley, Calif. The 220,000-sf, 130-bed acute care facility was completed through an 11-party IPD agreement led by DPR Construction, with architect Devenney Group. The hospital has a 22-bed emergency department and a 34-bed universal care center. Rien Van Rijthoven

 

In Yankee tradition, the organization carefully measured how every dollar would be spent. “Where do we spend to get efficiencies and return on investment?” says COO Paul Stein. “We have one chance to do this, so we better get it right.” 

Many stakeholders were involved in the planning for the Alfond Center—medical and non-medical staff, facilities/maintenance personnel, a Patient Family Advisory Council, and the hospital’s Lean process team, which is composed of four highly trained specialists who focus on analyzing hospital processes, recommending ways to improve efficiency, and training staff on how to implement those improvements. The Lean process team also contributes to the design of interior spaces, particularly in influencing layout standards and features that impact the flow of patients, physicians, and staff.

 

FROEDTERT & MEDICAL COLLEGE OF WISCONSIN: ‘RIGHT CARE, RIGHT PLACE, RIGHT TIME’

Froedtert & the Medical College of Wisconsin, centered in Milwaukee, is a regional healthcare network made up of three hospitals and more than 30 primary and specialty care health centers and clinics. The 500-bed Froedtert, the region’s only teaching hospital, is located on prime real estate in downtown Milwaukee.

Capital planning for the hospital is guiding by the principle that downtown space should house the highest-value services. For example, a current project to relocate some orthopedic services from the downtown campus will free up space for higher-end procedures such as organ transplants and cardiovascular care, says John A. Balzer, MSEM, Vice President of Facility Planning and Development. “Just as retailers track revenue per square foot, we do similar analyses of our facilities,” he says. 

Another key principle at Froedtert: “Provide the right care at the right place at the right time.” This strategy prompts expansion to communities so that patients have convenient access to care. “Utilization goes hand in hand with efficiency,” says Balzer. That means before the organization builds or leases new space, it looks to add evening and weekend hours at existing facilities. This can keep down costs on real estate, as well as increase convenience for patients—another key organizational goal.

New technology is impacting capital planning at the academic medical campus. A project to bring 30 operating suites up to modern standards in order to accommodate the latest surgical equipment is under design. “Thirteen operating rooms are under 500 sf,” says Balzer. “The standard today is 650 sf and up.”

Read the second installment of BD+C's March 2014 Healthcare Facilities Report, "6 keys to better healthcare design."
 
 

 

The editors wish to thank the following healthcare capital planning executives for serving as experts for this report:
Rick Albert, Director of Plant Operations, MaineGeneral Medical Center
John A. Balzer, MSEM, Vice President, Facility Planning and Development, Froedtert & the Medical College of Wisconsin
Dan Conwell, AIA, NCARB, Director, Planning, Architecture and Design, Sutter Health
Bob McCoole, Senior Vice President, Facilities Resource Group, Ascension Health
Carl Scheuerman, FACHE, Director, Regulatory Affairs, Sutter Health
Paul Stein, Chief Operating Officer, MaineGeneral Medical Center
Jim Young, Director, Capital Project Management, CHE Trinity Health

Related Stories

K-12 Schools | Apr 30, 2024

Fully electric Oregon elementary school aims for resilience with microgrid design

The River Grove Elementary School in Oregon was designed for net-zero carbon and resiliency to seismic events, storms, and wildfire. The roughly 82,000-sf school in a Portland suburb will feature a microgrid—a small-scale power grid that operates independently from the area’s electric grid. 

AEC Tech | Apr 30, 2024

Lack of organizational readiness is biggest hurdle to artificial intelligence adoption

Managers of companies in the industrial sector, including construction, have bought the hype of artificial intelligence (AI) as a transformative technology, but their organizations are not ready to realize its promise, according to research from IFS, a global cloud enterprise software company. An IFS survey of 1,700 senior decision-makers found that 84% of executives anticipate massive organizational benefits from AI. 

Codes and Standards | Apr 30, 2024

Updated document details methods of testing fenestration for exterior walls

The Fenestration and Glazing Industry Alliance (FGIA) updated a document serving a recommended practice for determining test methodology for laboratory and field testing of exterior wall systems. The document pertains to products covered by an AAMA standard such as curtain walls, storefronts, window walls, and sloped glazing. AAMA 501-24, Methods of Test for Exterior Walls was last updated in 2015. 

MFPRO+ News | Apr 29, 2024

World’s largest 3D printer could create entire neighborhoods

The University of Maine recently unveiled the world’s largest 3D printer said to be able to create entire neighborhoods. The machine is four times larger than a preceding model that was first tested in 2019. The older model was used to create a 600 sf single-family home made of recyclable wood fiber and bio-resin materials.

K-12 Schools | Apr 29, 2024

Tomorrow's classrooms: Designing schools for the digital age

In a world where technology’s rapid pace has reshaped how we live, work, and communicate, it should be no surprise that it’s also changing the PreK-12 education landscape.

Adaptive Reuse | Apr 29, 2024

6 characteristics of a successful adaptive reuse conversion

In the continuous battle against housing shortages and the surplus of vacant buildings, developers are turning their attention to the viability of adaptive reuse for their properties.

AEC Innovators | Apr 26, 2024

National Institute of Building Sciences announces Building Innovation 2024 schedule

The National Institute of Building Sciences is hosting its annual Building Innovation conference, May 22-24 at the Capital Hilton in Washington, D.C. BI2024 brings together everyone who impacts the built environment: government agencies, contractors, the private sector, architects, scientists, and more. 

Mass Timber | Apr 25, 2024

Bjarke Ingels Group designs a mass timber cube structure for the University of Kansas

Bjarke Ingels Group (BIG) and executive architect BNIM have unveiled their design for a new mass timber cube structure called the Makers’ KUbe for the University of Kansas School of Architecture & Design. A six-story, 50,000-sf building for learning and collaboration, the light-filled KUbe will house studio and teaching space, 3D-printing and robotic labs, and a ground-level cafe, all organized around a central core.

Sports and Recreational Facilities | Apr 25, 2024

How pools can positively affect communities

Clark Nexsen senior architects Jennifer Heintz and Dorothea Schulz discuss how pools can create jobs, break down barriers, and create opportunities within communities.

Senior Living Design | Apr 24, 2024

Nation's largest Passive House senior living facility completed in Portland, Ore.

Construction of Parkview, a high-rise expansion of a Continuing Care Retirement Community (CCRC) in Portland, Ore., completed recently. The senior living facility is touted as the largest Passive House structure on the West Coast, and the largest Passive House senior living building in the country.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021