flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

How owners should comply with OSHA roofing safety guidelines

Codes and Standards

How owners should comply with OSHA roofing safety guidelines

Buildings should have fall protection and restraint provisions for those who go on roofs.


By Peter Fabris, Contributing Editor | June 1, 2020

Courtesy Pixabay

Building owners have a responsibility to protect people who venture on their roofs, according to OSHA.

OSHA prescribed certain safety requirements that were introduced in January 2017. Among them are a raised warning line 15 feet from the roof edge, and a guardrail or cage around skylights.

OSHA has designated three work zones on low-slope roofs with unprotected edges that are four feet or more above a lower level. The extremely high danger zone (less than six feet from the roof’s edge) requires a protective feature such as a guardrail system, safety net system, personal fall protection systems (e.g., personal fall arrest, travel restraint, positioning system), or a 42-inch-high parapet.

Guardrails are typically installed six feet from the roof’s edge. If there is something near the edge like a condenser unit requiring periodic maintenance, then guardrails must be placed right up to the roof edge.

Related Stories

| Oct 28, 2011

OSHA requires training module on top causes of construction deaths

The Occupational Health and Safety Administration (OSHA) now requires a training module on the top four causes of death for construction workers.

| Oct 28, 2011

New York City requiring building energy use to be posted online

Owners of every New York City commercial and residential building larger than 50,000 sf will have to post each building’s energy use online by 2013.

| Oct 28, 2011

New ISO standard for escalator safety

A new ISO standard specifies safety requirements for escalators and moving walks.

| Oct 20, 2011

LEED 2012 to require real-time energy, water use reporting

The LEED 2012 rating system, set to launch in November 2012, will contain features to make sure buildings function as intended, and improve over time.

| Oct 20, 2011

New York City moving to speedier, online design reviews

New York City is moving towards a development design review process that will let officials and developers review blueprints for new projects online in a virtual conference room rather than in person.

| Oct 20, 2011

Michigan bill would let private firms operate as a city’s building department

Michigan House Bill 5011 would change state’s building code to allow private companies to operate as a municipality's building department.

| Oct 20, 2011

Alabama’s strict immigration law drives away construction workers

Alabama's strict new immigration law is driving many construction workers and roofers from the state.

| Oct 20, 2011

Fed bill would allow school rehab funding via historic tax credits

Virginia Sens. Jim Webb (D) and Mark Warner (D) introduced a bill this month to rehab aging schools across the country through the use of historic tax credits.

| Oct 20, 2011

Process leads to new design values for southern pine and other visually graded dimension lumber

A summary of the process used to develop new design values will clarify many of the questions received by the SFPA.

| Oct 19, 2011

Another drop for Architecture Billings Index

Positive conditions seen last month were more of an aberration.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021