flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

How owners should comply with OSHA roofing safety guidelines

Codes and Standards

How owners should comply with OSHA roofing safety guidelines

Buildings should have fall protection and restraint provisions for those who go on roofs.


By Peter Fabris, Contributing Editor | June 1, 2020

Courtesy Pixabay

Building owners have a responsibility to protect people who venture on their roofs, according to OSHA.

OSHA prescribed certain safety requirements that were introduced in January 2017. Among them are a raised warning line 15 feet from the roof edge, and a guardrail or cage around skylights.

OSHA has designated three work zones on low-slope roofs with unprotected edges that are four feet or more above a lower level. The extremely high danger zone (less than six feet from the roof’s edge) requires a protective feature such as a guardrail system, safety net system, personal fall protection systems (e.g., personal fall arrest, travel restraint, positioning system), or a 42-inch-high parapet.

Guardrails are typically installed six feet from the roof’s edge. If there is something near the edge like a condenser unit requiring periodic maintenance, then guardrails must be placed right up to the roof edge.

Related Stories

Codes and Standards | May 7, 2015

Several states moving to repeal prevailing wage laws

Anti-prevailing wage bills that apply to state-funded construction projects have been passed in West Virginia and Nevada. Similar laws could be passed in Indiana and Illinois.

Codes and Standards | May 7, 2015

New OSHA rule aimed at protecting construction workers in confined spaces

The agency says the rule will protect about 800 workers a year from serious injury.

Codes and Standards | May 1, 2015

Colorado House kills construction defects bill

The legislation would have made it harder for condo owners to sue builders.

Codes and Standards | May 1, 2015

New energy efficiency program, Tenant Star, gets OK from Congress

The voluntary program for commercial and government buildings is modeled after Energy Star.

Smart Buildings | May 1, 2015

FEMA to require states to evaluate risks posed by climate change

The aim is for states to do a better job planning for natural disasters they are likely to face in a warming world.

Codes and Standards | May 1, 2015

Department of Energy asks for feedback on cost-effectiveness of building energy codes

DOE’s RFI wants input on how to improve methodology on cost assessment.

Codes and Standards | Apr 22, 2015

New York State renews design-build authority

Five state agencies are allowed to use design-build on certain projects.

Codes and Standards | Apr 22, 2015

OSHA’s estimated cost of silica rule said to underestimate impact by $4.5 billion annually

The coalition says that OSHA’s flawed cost estimates point to flaws in the rule, and has urged the federal agency to reconsider its approach. 

Codes and Standards | Apr 22, 2015

GBCI renamed Green Business Certification Inc.

The name change reflects the organization’s expanded certification and credentialing services.

boombox1
boombox2
native1

More In Category

Sustainability

Grimshaw launches free online tool to help accelerate decarbonization of buildings

Minoro, an online platform to help accelerate the decarbonization of buildings, was recently launched by architecture firm Grimshaw, in collaboration with more than 20 supporting organizations including World Business Council for Sustainable Development (WBCSD), RIBA, Architecture 2030, the World Green Building Council (WorldGBC) and several national Green Building Councils from across the globe.




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021