flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

How engineers help developers meet green building objectives

Greenbuild Report

How engineers help developers meet green building objectives

Engineers say AEC teams need to be on the same page to help clients realize goals that often boil down to minimizing construction and operating costs.


By John Caulfield, Senior Editor | December 23, 2015
How engineers help developers meet green building objectives

The Asymmetric Warfare Group Training Complex, Fort A.P. Hill, Va., where Mason & Hanger (architect, SE) deployed ground-source heat pump systems. On the Building Team: GET Solutions (geothermal engineer), R. Ward & Associates (functional range planning), and Precision Measurements (topographic/utility survey). Photo: Skyshots/Courtesy Mason & Hanger.

 

Jeff Boldt, Principal and Director of Engineering for KJWW Engineering Consultants, was ticking off the benefits of well-designed duct systems for making buildings operate efficiently: Shorter duct paths equal less volume of ductwork equals lower costs. Less ductwork can also mean higher average ceilings. Direct duct paths (fewer turns) means fans use less power, which helps with energy compliance and minimizes noise complaints.

In the same breath, he lamented the “horrendous examples” of inefficient duct installations he still sees in peer reviews. He blames engineers for not convincing architects to position mechanical rooms more advantageously. “Sometimes I think engineers should have to take a sales class in college,” he says. “It’s not enough to know that it’s the right thing for a building. You must be able to explain why.”

Ronald Smith, Vice President with Mason & Hanger (a subsidiary of Day & Zimmerman), advises engineers to “start very early brainstorming any and every green or sustainable option, so you can back up design with data and research before the floor plan is even developed.” Alisdair McGregor, PhD, PE, Principal with Arup, adds that engineers should always be striving to “simplify” their big ideas, “and then keep them simplified.”

For its redevelopment of the Lower Sproul Plaza on the University of California at Berkeley campus, Syska Hennessy Group relied heavily on energy, daylighting, and air flow modeling, as well as solar and shade analysis, to evaluate the efficacy of natural ventilation as a primary means of providing passive cooling for occupant thermal comfort, says Robert Bolin, PE, LEED Fellow, ASHRAE HBDP, a Senior Principal at the firm. Syska worked with the university and architect Moore Ruble Yudell to, in Bolin’s words, “tune” the building massing and envelope design “to reduce loads sufficiently for natural ventilation to be viable.”

Engineers say AEC teams need to be on the same page to help clients realize goals that often boil down to minimizing construction and operating costs. For example, one of KJWW’s recent projects—the University of Iowa’s $55 million, 206,000-sf Football Operations Building and Indoor Practice Facility, which was completed in August 2014—was modeled by The Weidt Group to use 66% less energy than the ASHRAE 90.1-2007 baseline. Achieving that target meant integrating a water-to-water heat pump system, heat recovery, VAV air-handling units, daylight harvesting, LED lighting, occupancy sensors, and natural ventilation for the indoor practice facility.

Investments in energy efficiency added $1.62 million to the cost of construction, but the annual energy savings were projected to be $356,157, so the payback (with a $743,200 incentive from MidAmerican Energy Company’s EnergyAdvantage Commercial New Construction program) will be 2½ years.

Lincoln Pearce, a KJWW Principal and Project Executive, notes that public university clients are typically more receptive to life cycle cost analysis and can live with longer paybacks, whereas developers tend to hesitate to invest in sustainability unless the payback is within a few years or creates an advantage in leasing or selling.

 

The design for the Stanford Graduate School of Business  stresses water conservation and carbon reduction. Arup, working with Boora Architects, provided the structural, MEP, sustainability, and LEED documentation services. Photo: Proehl Studios.

 

COST REDUCTIONS SPUR PRODUCT DEMAND

The cost of components needed to hit energy-efficiency and sustainability performance targets keeps getting cheaper.

“LED lighting is at a tipping point” in pricing to where LEDs are now standard fare in most new projects, says Syska Hennessy’s Bolin. Arup’s McGregor notes that LEDs allow for lighting loads below 0.5 watts/sf—and can be “much lower, on average, with good daylighting.” The price of PV panels also continues to fall. “I think the next move has to come on the storage side of renewable energy,” he predicts.

Sensing devices are now “ubiquitous,” says McGregor. The move to cloud computing is reducing power loads at the desk. More clients are also showing interest in using sustainable structural timber for buildings as tall as 10 stories.

Mason & Hanger is turning increasingly to insulating concrete forms and dynamic demand control ventilation. So, too, with ground source heat pump systems, which it deployed in two recent projects: the Asymmetric Warfare Group Training Complex, Fort A.P. Hill, Va., and the Army Reserve Civil Affairs & Psychological Operations Command building, Fort Bragg, N.C.

Mason & Hanger’s Smith warns that all these innovations won’t mean much if a building’s operations and maintenance fall short. “When owners and operators shortcut O+M activities, they short-circuit their sustainable and energy efficient goals,” he says.

THE INEVITABILITY OF NET-ZERO ENERGY

Bolin says that measurable sustainability is becoming far more important to clients than third-party certification. McGregor adds that attaining net-zero energy and carbon neutrality, which were fringe objectives only a few years ago, are “moving into the mainstream, at least as stretch goals.”

ASHRAE has set a goal of net-zero energy for all new buildings by 2030. The Department of Energy, in collaboration with the National Institute of Building Sciences, recently released its “common definitions” for zero-net-energy buildings, campuses, and communities. It’s only a matter of time before net-zero water standards also become more prevalent, say engineering sources.

Meanwhile, ASHRAE 189.1 and the International Green Construction Code “are converging into one document,” says Boldt. He notes that the U.S. Green Building Council has stated that if it likes this resulting document, communities that adopt the next edition of IgCC will satisfy the prerequisites of the next version of LEED. That would lower the cost of certifying LEED projects and remove liability from USGBC.

Engineers are keeping their eyes on how the latest version of ASHRAE 90.1—the benchmark for commercial energy codes—gets implemented. McGregor notes that California’s energy codes already require minimum building performance that’s “well into LEED Silver territory.”

More-stringent regulations don’t worry McGregor. “Are these codes stifling economic growth? As I look out my office window in San Francisco, there are tower cranes operating in all directions. So I would say not.”

Related Stories

| Sep 26, 2016

BD+C's GreenZone structure en route to Greenbuild in Los Angeles

The 2016 Compton YouthBuild Education Center gets set for a ride from Porland, Ore., to Los Angeles, where the 600-sf structure will be on display at Greenbuild 2016 (Oct 5-6).

| Sep 9, 2016

Going to Greenbuild/LA? Be a BD+C 'Special Correspondent'

Building Design+Construction is looking for a few special Greenbuild 2016 attendees to join our team of Special Correspondents who are reporting all the news from Greenbuild-Los Angeles.  

Greenbuild Report | Dec 14, 2015

Sensible sustainability: The new standard for hotels

In October 2008, The Proximity, a 147-room hotel in Greensboro, N.C., became the first LEED Platinum–certified hotel in the U.S. Since then, only two other hotels have earned LEED Platinum.

Greenbuild Report | Dec 10, 2015

AASHE’s STARS tool highlights the university sector’s holistic approach to sustainability

Buzzwords like “living lab” and “experiential learning” are indicative of the trend toward more holistic sustainability programs that incorporate all facets of college life.

boombox1
boombox2
native1

More In Category

Codes and Standards

Developer Hines, engineer MKA develop free embodied carbon reduction guide

Real estate management and investment firm Hines has released the Hines Embodied Carbon Reduction Guide. The free guide, produced with Magnusson Klemencic Associates (MKA), is the result of a two-year effort, relying on MKA’s industry-leading knowledge of carbon accounting and involvement in programs such as the Embodied Carbon in Construction Calculator (EC3) Tool.




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021