Design and construction professionals who completed our flooring survey had strong opinions about their preferred flooring type. Typical responses: “Hardwood and porcelain tile are my favorites.” “I prefer carpet.” “I love polished concrete. Price, durability, ease of maintenance—need I say more?” “We have started using recycled rubber flooring and it has been a great success.” “My favorite would be integral color concrete, with options of staining, etching, and sealers or paste wax.”
“We are really sold on carpet tiles,” one respondent enthused. “Eighty percent of the wear is found on 20% of the carpet. I like replacing just 20% every 10 years.” Another respondent said, “Engineered wood looks like the real thing and performs resiliently to all scratches.” This respondent’s faves? Slate and wood: “Aesthetic, cool, and environmentally friendly.” Another’s “three best innovations”: “affordable, high-performance thin-set terrazzo, recyclable carpet, and bamboo.”
Respondents reported a problem with recent disruptions to the supply chain. “The biggest issue is getting the specified products in a timely manner, especially if they are made overseas,” said one. Another cited “availability and transportation costs.”
Maintenance issues also came up. “Many clients do not know how to maintain their floors well at minimal costs,” wrote one respondent. “On the other hand, manufacturers often present maintenance scenarios that are unreal.”
A number of respondents offered practical advice to others in the field. “Installers are a significant part of the equation,” warned one. “Always check your flooring moisture content prior to setting flooring materials,” advised one. Another piece of advice: “Always note the coefficient of friction.” Said another, “Thorough research has always preceded our flooring choices.”
WATER-BASED ADHESIVES AND CONCRETE
Several respondents wrote about the use of water-based adhesives on concrete slabs. “Although they are more eco-friendly with low VOCs, they require the concrete slab to be much drier than can typically be achieved,” said one. “This has prompted a slew of products to seal the concrete before installing the floor covering. Some of these products work and others do not. The manufacturers’ claims are typically not true and there is no standard to compare them.” This writer added that “newer adhesives have come out that can accommodate higher moisture and pH levels in the concrete. I welcome this trend as it greatly simplifies the process and creates less liability for everyone.”
Another got down and dirty on the topic of adhesion of floor coverings when vapor emissions, pH, or relative humidity values of new concrete floor slabs exceed the ranges allowed by the flooring manufacturer for a warrantable installation: “Using a reputable vapor emission control system (and our research has found that there are only a couple of systems that perform as advertised on a consistent basis) definitely helps reduce flooring failures.”
Summing up this moisture/adhesives issues, one AEC professional said, “The flooring industry must develop unified and clearly spelled-out national standards to test and accept relative humidity values. It is a mess right now. It must be thoroughly studied [and] researched, and national guidelines [must] be published.” BD+C
Major Findings of the Flooring Study
1. Ceramic tile was the runaway choice for flooring systems, with 80% of respondents using it in the past 18-24 months.
2. Other strong preferences: broadloom carpet (66%), carpet tile (65%), and VCT–vinyl composition tile and concrete/polished concrete (both 58%).
3. The four most important general factors in choosing flooring systems were initial cost, including installation (69%); durability/reliability (66%); performance/quality (61%;) and aesthetics (59%).
4. In terms of sustainability, life cycle cost/life cycle assessment (60%) and low to no VOC content (59%) finished in a virtual dead heat. Tying for third (given the 6% margin of error): LEED points or other green certification (39%) and recycled content (38%).
5. No certification program, rating system, or industry standard gained a majority of respondents. FSC certification (from the Forest Stewardship Council) for wood flooring came out on top (44%).
6. Nearly three in 10 respondents (29%) said they had no problems in choosing flooring products. Others cited such concerns as reliability of product data (31%), conflicting manufacturer claims and not enough time to research/choose products (both 29%), and false or unsubstantiated claims (28%).
METHODOLOGY
Building Design+Construction surveyed a representative sample of its subscribers via e-mail in late July 2011. An incentive of a $25 Amazon gift certificate was offered to the first 10 respondents; 258 qualified surveys were returned. The approximate margin of error: 6% at the 95% confidence level.
Table 1.
Which of the following flooring systems have you (or your firm) used in the past 18-24 months?
Ceramic tile 80%
Linoleum/linoleum-type flooring 36%
Broadloom carpet 66%
Laminate 33%
Carpet tile 65%
Rubber 32%
Concrete/polished concrete 58%
Composite wood 29%
Vinyl composite tile 58%
Bamboo 26%
Porcelain tile 55%
Terrazzo 26%
Hardwood 51%
Luxury vinyl tile 17%
Marble/stone 40%
Solid vinyl tile 17%
Vinyl sheet 37%
Cork 1%
N = 250 | Note: Respondents could make multiple selections.
The majority of our flooring survey respondents use ceramic tile, broadloom carpet, and carpet tile. Cork received only 22 (or just under 1%) of the 250 responses.
Table 2.
Based upon your experience and that of your clients, which of the following general factors do you find most important in choosing a flooring system?
Cost (initial cost, including installation) 69%
Durability/reliability 66%
Performance/quality 61%
Aesthetics 59%
Ease/cost of maintenance 37%
Acoustics/noise control 15%
Ease of installation 14%
Warranty 11%
Manufacturer’s reputation 10%
Recommendation from colleague or professional 4%
Recommendation from flooring contractor 3%
Recommendation from manufacturer’s technical representative 2%
Third-party rating or certification 2%
N = 252 | Note: Respondents could make multiple selections.
Cost ranked highest, with durability/reliability, performance/quality, and aesthetics following closely behind. Recommendations either from colleagues or professionals, flooring contractors, and a manufacturer’s technical representative garnered the least votes, along with third-party rating or certification.
Table 3.
From your experience and that of your clients, which of the following “green” or sustainability factors do you consider most important in choosing a flooring system?
Life cycle cost/life cycle assessment 60%
Low to no VOC content 59%
LEED points or other green certification 39%
Recycled content 38%
Local sourcing 32%
Recycleability at end of useful life 23%
No PVC 11%
Reduced packaging 7%
Biomimicry of flooring product 5%
N = 245 | Note: Respondents could make multiple selections.
Life cycle cost/life cycle assessment and low to no VOC content ranked highest, followed by LEED points or other green certification and recycled content. A reduction of packaging and biomimicry of flooring products received the fewest responses.
Table 4.
Which of the following certification programs, rating systems, or industry standards have you (or your firm)
used in evaluating, specifying, or using flooring products?
Forest Stewardship Council 44%
Greenguard 34%
Green Label/Green Label Plus 31%
Green Seal 28%
Green Spec Directory 23%
NSF-332 Resilient Floor Coverings Standard 22%
Ecologic 18%
FloorScore 18%
NSF-140 Sustainable Carpet Assessment Standard 16%
C2C Cradle to Cradle 15%
Sustainable Forestry Initiative 14%
Sustainable Choice 10%
Canadian Standards Association 6%
Indoor Advantage/Indoor Advantage Gold 6%
Pharos 3%
N = 202 | Note: Respondents could make multiple selections.
The Forest Stewardship Council, Greenguard, and Green Label/Green Label Plus were the top three certification programs, rating systems, or industry standards recognized by respondents when evaluating, specifying, or using floor products. The top three were followed closely by Green Seal and Green Spec Directory. Pharos only garnered 3% of the 202 total responses.
Table 5.
From your experience, what are the three biggest problems you face (or have faced) in choosing flooring products?
Reliability of product data 31%
Conflicting manufacturer claims 29%
Not enough time to research/choose products 29%
No problems in choosing flooring products 29%
False or unsubstantiated claims 28%
Not enough product data 22%
Too many product choices 15%
Product data not technical enough 13%
Product data too technical/too hard to understand 9%
Not enough product choices 8%
Too much product data 2%
N = 245 | Note: Respondents could make multiple selections.
Reliability of product data represented 31% of the responses, followed by conflicting manufacturer claims, not enough time to research/choose products, no problems in choosing flooring products at 29%, and false or unsubstantiated claims (28%). Only 2% of respondents selected too much product data as one of the biggest problems faced in choosing flooring products.
Related Stories
| Aug 30, 2013
A new approach to post-occupancy evaluations
As a growing number of healthcare institutions become more customer-focused, post-occupancy evaluations (POE) are playing a bigger role in new construction and renovation projects. Advocate Health Care is among the healthcare organizations to institute a detailed post-occupancy assessment process for its projects.
| Aug 29, 2013
First look: K-State's Bill Snyder Family Stadium expansion
The West Side Stadium Expansion Project at Kansas State's Bill Snyder Family Stadium is the largest project in K-State Athletics history.
| Aug 27, 2013
Industrial Sector Report [2013 Giants 300 Report]
Building Design+Construction's rankings of the nation's largest industrial sector design and construction firms, as reported in the 2013 Giants 300 Report.
| Aug 26, 2013
What you missed last week: Architecture billings up again; record year for hotel renovations; nation's most expensive real estate markets
BD+C's roundup of the top construction market news for the week of August 18 includes the latest architecture billings index from AIA and a BOMA study on the nation's most and least expensive commercial real estate markets.
| Aug 26, 2013
Chicago Bears kick off season at renovated Halas Hall
An upgraded locker room, expanded weight room, and updated dining room with an outdoor patio greeted the Chicago Bears when they arrived at Halas Hall for practice this month. The improvements are part of a major expansion and renovation of the Bears’ headquarters in Lake Forest, Ill., completed by Mortenson Construction in less than seven months.
| Aug 22, 2013
Energy-efficient glazing technology [AIA Course]
This course discuses the latest technological advances in glazing, which make possible ever more efficient enclosures with ever greater glazed area.
| Aug 22, 2013
Warehouse remake: Conversion project turns derelict freight terminal into modern office space [slideshow]
The goal of the Freight development is to attract businesses to an abandoned industrial zone north of downtown Denver.
| Aug 21, 2013
AIA: Architecture billings on the rise in July
The Architecture Billings Index for July was 52.7, up from a mark of 51.6 in June. This score reflects an increase in demand for design services (any score above 50 indicates an increase in billings).
| Aug 20, 2013
40 Under 40 retrospective: ‘U40s’ take on continuing ed, snake’s blood
Every month we’ll be touching base with past 40 Under 40 honorees to see what’s been happening in their professional and personal lives since winning the award. This month: An accomplished author of test-prep books and an architect who headed to China when the American economy turned sour.
| Aug 20, 2013
Top Data Center Architecture Firms [2013 Giants 300 Report]
Corgan, Gensler, HDR head Building Design+Construction's 2013 ranking of the largest data center architecture and architecture/engineering firms in the U.S.