Moisture Control/Building Envelope

On reroofing projects, PVC and asphalt should never meet

For a number of reasons, PVC is a popular choice of material on reroofing projects: well-suited to “cool roof” goals, readily recyclable, flame resistant, and highly flexible. It’s important to recognize, however, that PVC membrane products are not compatible with asphalt-based products. (http://duro-last.com/blog/2011/07/pvc-is-to-asphalt-like-oil-is-to-water/) If you replace or re-cover your old asphalt roof with a new PVC membrane, here are some key issues to keep in mind for a quality installation:
Aug. 10, 2011

For a number of reasons, PVC is a popular choice of material on reroofing projects: well-suited to “cool roof” goals, readily recyclable, flame resistant, and highly flexible. It’s important to recognize, however, that PVC membrane products are not compatible with asphalt-based products.
(http://duro-last.com/blog/2011/07/pvc-is-to-asphalt-like-oil-is-to-water/)

If you replace or re-cover your old asphalt roof with a new PVC membrane, here are some key issues to keep in mind for a quality installation:

  • Tear-offs of asphalt roofs often create dust that contaminates a new membrane. Take into account the wind direction, put a tarp over PVC materials placed near the tear-off, ensure that shoes don’t track asphalt over PVC, and complete the tear-off before beginning PVC installation.
  • Make sure that compatible sealants are used on the new membrane. Many caulks, sealants, and pitch pocket fillers contain asphalt, and should never be used on PVC.
  • If your project involves re-covering the built-up roof rather than tearing it off, a suitable separator must be installed between the old asphalt and new PVC roofing systems. 

About the Author

Drew Ballensky

Drew Ballensky is general manager of Duro-Last Roofing, Inc.’s central U.S. facility in Iowa and company spokesman for Duro-Last’s cool roofing, sustainability and architectural education programs. He is past-president of the Chemical Fabrics and Film Association and chairman of CFFA’s Vinyl Roofing Division. Drew earned his bachelor’s degree in industrial technology from the University of Northern Iowa and master’s degree in business administration from Florida State University. Drew has over 29 years experience in business and industry in various engineering and managerial capacities. He has worked in the U.S. and Canadian operations for a major international manufacturer of pre-engineered steel buildings, was a financial analyst with a major athletic apparel manufacturer and was an owner of a general contracting company.
Show more
Sign up for Building Design+Construction Newsletters