Much of the change is a result of the by the current recession, as The Wall Street Journal has reported. Corporate real estate managers are shrinking their firms' workstations and overall footprint in order to stay competitive and reduce overhead. But even more pertinent, says Andrew Laing, managing director of the workplace consultant DEGW, New York, is pure innovation in how office users get the job done. New terms such as activity-based work, along with co-working, mobile officing, and distributed workplace models, are being used to describe the brave new world of workplace.
“These are important trends that grew out of an urgent need to update our current conception of workplace—a change of mindset enabled by the latest mobile technologies,” says Laing, adding that sustainability, global reach, and worker diversity are also driving the change. “The whole idea of work and workplace is being transformed. Now developers and designers of office buildings face enormous challenges in what they should provide to organizations and end-users.”
Berenice Boucher, a director with DEGW (www.degw.com), points to the forecast Worldwide Mobile Worker Population, by Framingham, Mass.-based marketing and analysis firm IDC. (For IDC's definition of various types of mobile workers, see: http://www.workshifting.com/downloads/documents/IDC_MobileWorker_excerpt_0_0.pdf.) “According to the report, the worldwide number of mobile workers is projected to grow to 1 billion by year-end 2011, up from about 759 million in 2006,” says Boucher. The lion's share of those mobile workers will be in Asia; other salient facts include:
-
The United States has the highest percentage of mobile workers—68% in 2006, a figure that is expected to reach 73% in 2011.
-
Western Europe has the second-largest mobile workforce (47.8%).
-
Japan's mobile workforce is increasing at the fastest rate (8.5% compound annual growth rate, 2006 to 2011), despite zero growth in workers.
For Building Teams, the challenge is to adapt office facilities to the new technologies and work styles as fast as possible. Adding pressure to this mandate are studies like the recently released U.S. Workplace Survey, conducted by Gensler, the largest U.S.-based architecture firm. Among its key conclusions: top-performing companies have significantly higher-performing work environments than average companies.
What this means, according to Gensler, is that workplaces must successfully support four main modes of working: focused work, collaboration, learning, and socialization. High-performance workplaces receive the best marks from employees on design elements such as layout, air quality, furniture comfort, storage, and privacy/access. When done right, the study concludes, employee ratings of the workplace features correlate directly with fundamental, bottom-line business measures of company performance and profitability. (For more on the study, see: http://www.gensler.com/uploads/documents/2008_Gensler_Workplace_Survey_US_09_30_2009.pdf.)
EFFICIENT AND EFFECTIVE
![bdc1001supp_corp2 bdc1001supp_corp2](/photo/241/241581-bdc1001supp_corp2.jpg)
“With respect to resource efficiency, some of the latest trends that we've seen include reduction in rentable square footage, smaller office sizes and work spaces, and a heightened consideration of locating ancillary spaces off-site,” observes Rick Focke, interiors director of design, HOK (www.hok.com), New York, N.Y. As a result, office layouts are evolving into smaller work areas and multiple-use spaces, using simpler material palettes. Focke and others also see many corporations opting to use furniture systems instead of walls for spatial boundaries, and some are treating structure as finish, thus eliminating additional materials and costs.
Jennifer Barnes, IIDA, a vice president with RTKL Associates (www.rtkl.com), Baltimore, has observed many clients opting to extend their leases in order to avoid relocation. “These clients come to us seeking added flexibility to accommodate a dynamic workforce,” says Barnes. “They seek dual-use spaces, hoteling stations, and more options for remote desktop capabilities.” The concept of hoteling—where employees who typically spend the majority of their work time on the road will reserve a workspace when they plan to be in the office—is not as new as activity-based work and co-working, but it seems to be gaining popularity again as corporations look to maximize resources.
![bdc1001supp_corp3 bdc1001supp_corp3](/photo/241/241582-bdc1001supp_corp3.jpg)
In fact, according to research led by Seattle-based environmental psychologist Judith Heerwagen, 80% of office interactions are unplanned and occur as a result of one employee being able to visually monitor the availability of another employee.
“Companies are shifting their occupancy away from individual spaces and putting some of the saved space into shared amenities such as break rooms, small break-out meeting rooms, and conferencing areas,” confirms Byron Edgmon, a senior vice president with global real estate owner, developer, and manager Jones Lang LaSalle (www.joneslanglasalle.com), Dallas.
HOK's Focke says he is witnessing designs that take square footage away from lobby and reception areas in order to increase space dedicated to interactive and communal uses. Similarly, Kim Heartwell, AIA, a senior vice president in the Washington, D.C., office of RTKL, says, “Cafés and break areas have become the new meeting rooms, while workstations have become more community-oriented and modular in design.”
To support these changes, interior architecture is evolving. Designers more frequently suggest strategies such as glass office fronts and low workstation panels. As for opening up private office space, ideas include using lighter colors, increased daylight, and more plantings, as well as encouraging managers to leave their doors open—or remove them entirely, as ad agency JWT recently did for their New York City headquarters. In fact, the interiors designed by Clive Wilkinson Architects, Los Angeles, in consultation with DEGW, are radical in terms of openness and the use of novel collaboration spaces, which account for about half of the floor area.
Of course, workers also have a need for private space and uninterrupted work time. Research shows that providing employees with ways to control interruptions will increase satisfaction and productivity. For example, studies by a leading office furniture manufacturer suggest the following design solutions:
-
Using partition-like options for each workspace, such as movable screens or plants, which employees can utilize when they want to communicate an interest in not being disturbed.
-
Including spaces where people can make private calls.
-
Providing access to “quiet rooms,” where employees can escape noise and distractions or simply enjoy a change of environment.
Sustainability and health. In addition to balancing openness and privacy, the move toward healthy, green work
![]() |
![]() |
environments remains a priority for office users, says RTKL's Barnes, a frequent presenter on workplace solutions at NeoCon, the annual interiors conference (www.neocon.com). “Worker health and comfort are being addressed at a much broader level than ever before,” she says. “In addition to design considerations, clients are making a point to offer showers, bike racks, outdoor spaces, flexible technology, and the like to accommodate alternative transportation and employee lifestyles.”
The market for sustainable products has grown in step with this trend. For example, according to Melissa Mizell, IIDA, LEED AP, a senior associate in Gensler's San Francisco office, specifiers can now easily find environmentally preferable wallboard, carpet tiles, flooring, and translucent resins—all with recycled content, and usually without a cost premium. Similarly, sourcing products locally or finding alternatives that emit zero or low levels of volatile organic compounds (VOCs) is now easier than ever. However, Mizell urges designers to specify verified sustainable products that actually live up to their claims of sustainability.
FURNISHINGS KEEP EVOLVING
Perhaps the most dominant trend in the world of office furnishings has been a noted reduction in cubicle area, while simultaneously opening up these spaces.
“The emerging trends that have penetrated the interior design furnishings market include more compact and efficient workstations, minimal panel heights, smaller furniture sizes, minimal casework, and less sizable storage provisions,” says HOK's Focke.
According to Michael Rominske, director of interiors with Nadel Architects (www.nadelarc.com) in Torrance, Calif., this trend has been accompanied by a greater focus on the architecture of the space. “With systems furniture moving from typical panel-based systems to a more open, architectural furniture-based approaches, storage units and screens are now being used to delineate the space,” he says. He adds that using systems furniture which is more furniture-based allows the light to filter through to the workstations as the “sea of panels” can be eliminated for a more favorable stepped architectural look.
Another noteworthy trend is increased flexibility and ease of reconfiguration with personal workstations, private offices, and conference areas.
For instance, with workstations built from furniture-based components, in addition to the more traditional panels, individuals are able to move around their furniture to accommodate different tasks and work styles, according to Gayle Lane, IIDA, a principal at EwingCole (www.ewingcole.com), Philadelphia. “Workstation and private office furniture now respond to the individual's needs for technology, storage, and work space as filing, piling, meeting, working with multiple computers, storage, and display of personal items have all been considered and accommodated,” she says. This has encouraged the development of new products such as innovative work surface shapes, drawers, wardrobe units, and storage elements and shelving in a variety of configurations.
For conference rooms, Lane, who has been designing office interiors for close to 35 years, is now seeing modular tables that gang in different configurations, in addition to folding, flipping, nesting, and rolling for storage. “Also available to complete the space are accessory items such as credenzas and podiums that allow for the integration of audio-visual and computer equipment,” she says.
Of course, the increased use of cutting-edge IT and telecommunications technology, including mobile devices and in-office tools like videoconferencing, plasma screens, and smart boards, has dramatically affected office infrastructure. “The most significant technology trend we are seeing is in videoconferencing—a technology that has improved dramatically,” says Jones Lang LaSalle's Edgmon. “These high-end videoconferencing solutions are expensive, but compared to employee travel costs, they are worth it.”
Beyond videoconferencing (which DEGW and corporate end-users now call telepresence), the basic electrical, voice, and data services must be accommodated more effectively. Whether it's power and data connections for easy laptop plug-in, smart phone recharging ports, or Internet connectivity in break rooms and touchdown spaces, such features are quickly becoming standard in today's workplace.
![bdc1001supp_corp4 bdc1001supp_corp4](/photo/241/241583-bdc1001supp_corp4.jpg)
Beyond improved product quality, a major driver of the trends is the churn rate—the percentage of employees who move between work areas during a period of time, which is now in the range of 25% to 50%, according to Robert A. Flaynik, AIA, LEED AP, corporate practice director with EwingCole. This need for rapidly adapting building spaces has made flexible wall and partition systems a cost-effective option and long-term solution for maximizing workspace. Additional benefits, says Flaynik (tapping into his 20-plus years of experience in planning and designing corporate headquarters and workplaces), include increased transparency for better daylight penetration, improved sustainability, and the ability to integrate working walls, marker boards, sliding doors, tack boards, and environmental graphics.
JLL's Edgmon points out that “demountables used to be three or four times more expensive than conventional drywall, but this gap has narrowed. Now, demountables are about double the cost of drywall, so if you move a partition once it has paid for itself.”
Similar to demountables are preconstructed wall systems, which can be made from frame and gypsum, aluminum frame and glass, wood and glass, or other such combinations. “They can be prefinished, and can come with a pre-installed track to accept hanging furniture systems such as worksurface and overhead shelving,” says Barbara E. Cain, NCIDQ, LEED AP, a principal in the Pittsburgh office of Burt Hill (www.burthill.com). “However, use of these systems requires more up-front planning and design, as the ceiling heights must be set and hard construction cannot deviate from the plan. But they also provide the advantage of being reconfigurable.”
Beyond demountable and prefab walls, glass partitions also have an important place in the corporate interiors environment. In addition to providing sunlight penetration, transparency, and general aesthetic interest, Nadel Architects' Rominske points out that privacy concerns can be addressed by using frosted or textured glass.
FLOORING OPTIONS EMERGE
Changes in wall systems, workstation configurations, and technological infrastructure are hardly the only major changes happening in today's workplace. Take a look at flooring systems, for example. Broadloom carpet and vinyl flooring used to be the hands-down standards for heavily trafficked applications. Yet, this has evolved dramatically.
“The demand for sustainable products such as linoleum, cork, bamboo, and carpet tile with recycled content continues to grow,” says Burt Hill's Cain, who has been designing office interiors for the past 30 years. “While the upfront cost for these materials tends to be slightly higher than their counterparts, the long-term replacement costs and lowered environmental impact allow them to be viable options. And as the demand and production for these products increases, it is anticipated that costs will trend downward.”
In terms of specific sustainable attributes, linoleum is considered natural because it is made from renewable resources. Cork is classified as a rapidly renewable resource because the bark of the tree from which it is taken grows back in about nine years. Bamboo is available for harvesting in about three years, not to mention the fact that it doesn't require replanting and needs only minimal fertilization.
However, some building professionals are skeptical about bamboo's green qualities. For example, Todd Fratzel, PE, principal engineer with United Construction Corporation (www.unitedconstruction.biz), Newport, N.H., points out that most bamboo flooring products contain formaldehyde binders. Bamboo is also predominately grown in the Far East, so it requires overseas transportation. Last, the plant's bamboo's popularity is causing the clear-cutting of old-growth forests to make room for new bamboo stands.
As for carpeting, some new products use biobased materials, while others offer various levels of pre- and post-consumer recycled content. One advantage offered by carpet tiles is that much less material is wasted per installation due to the small, modular size of the tiles. “While initially more expensive than broadloom, carpet tiles are commonly being used due to maintenance [advantages],” says Rominske. “Also, having an attic stock allows for the changing of tiles and keeps a facility looking new. Additionally, they contribute to LEED points and can be used as design elements.”
Beyond carpet, Barnes has seen modular flooring systems growing in popularity due to their flexibility, long-term value, and the expanding market offerings, with several high-quality finish options. To evaluate the pros and cons of different flooring options for varying spaces, EwingCole's Lane offers the firm's in-house primer to guide choices in lobbies, offices, executive suites, meeting areas, and break rooms:
• Lobbies. These public zones generally require high visual impact while also addressing public safety concerns and durability needs. Options include stone tile, porcelain ceramic tile, and terrazzo.
• Offices, workstations, and meeting areas. With intermittent daily traffic, these spaces need to provide visual interest and good performance in terms of acoustical privacy and durability. Typical specifications: carpet tile and broadloom carpet.
• Executive reception areas, conference rooms, and offices. The corner office may not look like the mahogany foxholes of yore, but they still require a special level of visual interest and sophistication, as well as moderate durability. Good options: wood flooring, broadloom carpet (including real wool), and stone tile.
• Pantry areas, break rooms, and cafés. Along with espresso bars and other foodservice amenities comes a demand for special flooring products. Again, visual interest is important, as is durability and ease of cleaning. Options include vinyl composition tile, solid vinyl tile or quartz tile, rubber tiles, and linoleum sheet.
• Restroom areas. Whether for visitor use or employees only, restrooms require visual interest, excellent durability, and the ability to tolerate regular cleaning while remaining water- and slip-resistant. Linoleum and vinyl sheet, porcelain ceramic tile, and ceramic mosaic tile are standard options for these utilitarian spaces.
(For more details from Gayle Lane, see “A Primer on Office Flooring,” p. 28.)
Raised floors. Another important floor-related trend is the use of raised floors with underfloor air delivery, sometimes called UFAD. While the environmental benefits of these systems are significant, their first cost tends to be higher than those for conventional flooring assemblies. “Considerations should be made relative to flexibility and how this relates to the overall goals for LEED for air distribution, ventilation, and controls, as well as electrical and data [supply],” advises Joyce Fownes, RID, LEED AP, a principal in the Atlanta office of Perkins+Will (www.perkinswill.com), referring to the U.S. Green Building Council's LEED rating system.
On the plus side, labor and materials costs will be reduced for the underfloor electrical and data changes, she notes. At the same time, other important considerations include subfloor leveling integrity, ADA and accessibility ramps, and steps and interface with the exterior window wall. Aesthetic considerations are often addressed with carpet tile.
CEILING TREATMENTS MULTIPLY
In today's corporate office environment, there's more for the ceiling than the standard dropped ceiling with lay-in acoustical tiles, although that solution does remain the norm for corporate interiors, according to Burt Hill's Cain. In recent years, product lines have expanded to offer ceiling treatments with increased visual interest that can also integrate MEP building systems such as HVAC, lighting, sprinklers, and audio speakers into a single highly compact “technical zone.” The benefit of this approach is that the rest of the ceiling plane is left uncluttered.
According to Focke, in tight urban settings like New York City and even in many suburban office locations, “There is a gravitation toward more open ceilings, taking advantage of ceiling heights with the capacity to absorb lighting and fire-protection equipment.”
At the same time, acoustics can be a problem with open ceilings. One approach, says Cain, is to utilize free-floating hanging clouds, arcs, or canopies to assist with sound absorption. Jones Lang LaSalle's Edgmon likes to go with a high-performance acoustical ceiling, along with sound masking or white-noise systems, especially with spaces trending toward openness and collaboration. Whereas “high-end” used to mean drywall, Edgmon sees this as changing. Nowadays, lay-in wood, acoustical panel systems, and stretch fabric systems are considered good choices for dealing with sound and accessibility issues.
In terms of flexibility, RTKL's Heartwell highly recommends modular systems—without, however, advocating a one-size-fits-all approach. Rather, she says, it's important to “pick a system based on lighting fixtures, acoustics of the space, ductwork, and other factors, as ceiling systems will differ based upon the space type.”
For materials selection, typical system ceiling choices include mineral fiber and fiberglass acoustical ceiling tiles as well as linear, plank, and tile grids with wood and metal finish panels. EwingCole's Lane summarizes the pros and cons of each of these selections:
• Drywall – High aesthetic value, high first cost, moderate maintenance cost (areas around access panels must be repaired and repainted), and limited acoustical attenuation. Lighting and other devices can be organized and placed almost anywhere.
• Mineral fiber acoustical ceiling tiles – Low to moderate aesthetic value, low to moderate first cost, and low to moderate acoustical qualities. Maintenance costs are low to moderate—some suspension systems can be more difficult to access, while some ceiling tiles are more easily damaged and require more frequent replacement. Lighting, sprinklers, smoke detectors, speakers, and other utilities can be fully integrated into systems available from certain manufacturers.
• Fiberglass acoustical ceiling tiles – Moderate aesthetic value, moderate to high first cost, low maintenance costs, and high acoustical qualities. Lighting, MEP, and audiovisual systems can be fully integrated, depending on the system manufacturer.
• Wood linear, plank, and tile ceilings – High first cost and low maintenance costs, depending upon the degree of accessibility. With moderate to high aesthetic value, these products can range from typical acoustical ceiling tile modules to a completely custom installation. The products offer low to moderate acoustical qualities—tiles and planks can be perforated for noise attenuation, and all can be installed with acoustical material above.
• Metal linear, plank, and tile ceilings – Low to high aesthetic value (ranging from typical acoustical ceiling tile modules to a completely custom installation), low to high first cost, low maintenance costs (depending upon degree of accessibility), and low to moderate acoustical qualities. These tiles and planks can also be perforated and can accept acoustical material.
LIGHTING THE NEW WORKPLACE
Driven by stricter energy codes, standards, and evolving requirements for LEED, Green Globes, and other sustainability ratings, office interiors are seeing an increased focus on task lighting, lighting control systems, and fixtures using light-emitting diodes (LEDs). “New energy-efficiency requirements and industry standards have encouraged designers to be more stringent as they calculate lighting needs,” says RTKL's Barnes. “Because of this, we're seeing more variation in lighting levels and greater use of task lights.”
Jones Lang LaSalle's Edgmon says the lighting industry is responding with more creative, cost-effective light fixture styles and designs. In fact, many fixtures can provide more lumens per watt than previous models while using only two lamps, rather than three or four. The increased efficiency is the result of higher reflectivity fixture housings as well as better lamp technology, he notes.
Advanced control systems—from occupancy sensors to daylight sensors to zoning systems—are being specified for both general and task lighting as a means to address energy requirements. To capitalize on even greater efficiencies, Mary Alcaraz, PE, LC, CEM, LEED AP, a principal with EwingCole, Philadelphia, recommends coupling lighting controls with T5 fluorescent indirect/direct pendants and recessed luminaires and volumetric luminaires. “This gives users at least two levels of lighting, one of which can be task lighting,” says Alcaraz, while automatically turning off electric lighting when not needed. Such a system can be paired with automated window shading systems to take advantage of natural daylight, she notes.
Burt Hill's Cain stresses the importance of designing for daylighting, suggesting screens or semi-opaque shades as strategies to enable natural light and views while controlling glare and heat gain.
Although the technology is still developing, LEDs are now being used for task lighting and supplemental lighting, offering high energy efficiencies and limited heat discharge. Down the line, says Alcaraz, a frequent industry presenter and author on lighting-related topics, Building Teams should anticipate manufacturers of LED fixtures introducing new office lighting luminaires, although she cautions designers to evaluate these systems carefully as they come to market.
SURFACES, FABRICS, AND FINISHES
Another materials category integral to successful workplaces is finishes. Beyond visual appeal and functionality, says Nadel Architects' Rominske, “There has been a huge shift in manufacturers providing sustainable materials and finishes for almost any application.”
RTKL's Heartwell concurs. “Sustainability has taken hold of the finishes market,” she says. “Every vendor is out there promoting their sustainable product lines.” The challenge for Building Teams is to distinguish real green advantages from hype or obfuscation.
Leading the way in terms of unique environmental benefits are acrylic-based screens and materials, as well as quartz and other solid surface materials, according to Rominske. In lobbies and reception areas, Barnes has observed a tendency to use regional materials, both for sustainable design reasons but also to lend an authentic regional aesthetic to otherwise generic corporate surroundings. “Because it can be difficult to get a glossy finish from sustainable materials such as low-VOC paints and sealers, there seems to be a 'celebration of the organic,'” she says.
As for wood, rare and exotic species are out of favor, while salvaged and reclaimed wood is in, thanks to the green movement. Moreover, the latest generation of water-based polyurethane finishes, particularly for high-traffic office areas, offers fast-drying properties, strong performance, and low VOC levels.
Beyond these newer trends, Cain still sees classic finishes such as metal, stone, and ceramics as playing an important role in the market on account of their quality and durability, two attributes that play well in the corporate interiors market.
WORKPLACES THAT WORK BETTER
The ongoing economic recession is forcing Building Teams to think even more creatively about how office interiors can respond to economic conditions and, in a curious way, creating an exciting time for workplace interiors. Fundamental changes, such as the new open-plan environments and the integration of mobile work technologies, are the first big step. The next big hurdle is to document the real benefits of better workplace facilities in terms of productivity, occupant satisfaction, and even such measures as customer acquisition and product development.
According to DEGW's Laing, novel office strategies can lead to quantifiable improvements in organizations. As one example, he points to pharmaceutical maker GlaxoSmithKline's new consumer product hubs, which bring R&D scientists and marketing teams into close proximity. By integrating workplace design with the highest level of corporate strategy, the client has recorded specific, measurable improvements, including 45% faster decision making, 67% less daily time loss, and a 17% boost in perceived responsiveness to market. Not only that, but GlaxoSmithKline also now enjoys a more sustainable facilities program, based on such measures as square footage per employee.
Any workplace can make a positive contribution, say leading practitioners. Yet, between new technologies, expanded product options, and the trend toward more open, collaborative spaces, Building Teams are under pressure more than ever to innovate on behalf of workplace users. Ultimately, the best work means interesting, innovative, and attractive spaces where today's corporate talent can best thrive.
Once you've read our special report, take the AIA exam to earn 1 AIA HSW learning unit. (one-time registration required)
Reed Business Information is a Registered Provider with the American Institute of Architects Continuing Education Systems. Credit earned on completion of this program will be reported to CES Records for AIA members. Certificates of Completion for non-AIA members are available on request. |
Related Stories
High-rise Construction | Dec 7, 2022
SOM reveals its design for Singapore’s tallest skyscraper
Skidmore, Owings & Merrill (SOM) has revealed its design for 8 Shenton Way—a mixed-use tower that will stand 63 stories and 305 meters (1,000 feet) high, becoming Singapore’s tallest skyscraper. The design team also plans to make the building one of Asia’s most sustainable skyscrapers. The tower incorporates post-pandemic design features.
Office Buildings | Dec 7, 2022
Software giant SAP opens engineering academy for its global engineering workforce
Software giant SAP has opened its new SAP Academy for Engineering on the company’s San Ramon, Calif. campus. Designed by HGA, the Engineering Academy will provide professional development opportunities for SAP’s global engineering workforce. At the Engineering Academy, cohorts from SAP offices across the globe will come together for intensive, six-month training programs.
Multifamily Housing | Dec 7, 2022
Canada’s largest net-zero carbon residential community to include affordable units
The newly unveiled design for Canada’s largest net-zero carbon residential community includes two towers that will create a new destination within Ottawa and form a striking gateway into LeBreton Flats. The development will be transit-oriented, mixed-income, mixed-use, and include unprecedented sustainability targets. Dream LeBreton is a partnership between real estate companies Dream Asset Management, Dream Impact, and local non-profit MultiFaith Housing Initiative.
Student Housing | Dec 7, 2022
Cornell University builds massive student housing complex to accommodate planned enrollment growth
In Ithaca, N.Y., Cornell University has completed its North Campus Residential Expansion (NCRE) project. Designed by ikon.5 architects, the 776,000-sf project provides 1,200 beds for first-year students and 800 beds for sophomore students. The NCRE project aimed to accommodate the university’s planned growth in student enrollment while meeting its green infrastructure standards. Cornell University plans to achieve carbon neutrality by 2035.
Office Buildings | Dec 6, 2022
‘Chicago’s healthiest office tower’ achieves LEED Gold, WELL Platinum, and WiredScore Platinum
Goettsch Partners (GP) recently completed 320 South Canal, billed as “Chicago’s healthiest office tower,” according to the architecture firm. Located across the street from Chicago Union Station and close to major expressways, the 51-story tower totals 1,740,000 sf. It includes a conference center, fitness center, restaurant, to-go market, branch bank, and a cocktail lounge in an adjacent structure, as well as parking for 324 cars/electric vehicles and 114 bicycles.
Multifamily Housing | Dec 6, 2022
Austin's new 80-story multifamily tower will be the tallest building in Texas
Recently announced plans for Wilson Tower, a high-rise multifamily building in downtown Austin, Texas, indicate that it will be the state’s tallest building when completed. The 80-floor structure will rise 1,035 feet in height at 410 East 5th Street, close to the 6th Street Entertainment District, Austin Convention Center, and a new downtown light rail station.
Geothermal Technology | Dec 6, 2022
Google spinoff uses pay-as-you-go business model to spur growth in geothermal systems
Dandelion Energy is turning to a pay-as-you-go plan similar to rooftop solar panel leasing to help property owners afford geothermal heat pump systems.
Contractors | Dec 6, 2022
Slow payments cost the construction industry $208 billion in 2022
The cost of floating payments for wages and invoices represents $208 billion in excess cost to the construction industry, a 53% increase from 2021, according to a survey by Rabbet, a provider of construction finance software.
Mixed-Use | Dec 6, 2022
Houston developer plans to convert Kevin Roche-designed ConocoPhillips HQ to mixed-use destination
Houston-based Midway, a real estate investment, development, and management firm, plans to redevelop the former ConocoPhillips corporate headquarters site into a mixed-use destination called Watermark District at Woodcreek.
Office Buildings | Dec 5, 2022
How to foster collaboration and inspiration for a workplace culture that does not exist (yet)
A building might not be able to “hack” innovation, but it can create the right conditions to foster connection and innovation, write GBBN's Chad Burke and Zachary Zettler.