The Gypsum Association released updates to both GA-221 Repair of Joint Ridging and GA-222 Repairing Screw or Nail Pops standards publications. Each set of recommendations clarifies best practices associated with common wallboard repairs.
Joint ridging, or beading, is a uniform, fine linear deformation that occurs at the joints of finished and decorated gypsum panel products. Compression at the edges or ends of the panels due to extreme fluctuations of temperature and humidity is the most common cause of ridging; however, misaligned framing can also contribute to the problem. The Gypsum Association recommends waiting until a new structure has experienced at least one complete heating/cooling cycle before making repairs.
Fastener popping occurs most commonly from lumber shrinkage due to initially high moisture content in newly constructed wood framing. Overly long fastener length contributes to the problem. While fastener popping that appears before or during finishing and decoration should be repaired immediately; popping that occurs a month or more into the heating season should wait for repair until the season’s end.
In the case of fastener popping, the secure reattachment of the gypsum panel product to the framing is essential. All new screws or nails should be of the proper length. Key to the repair methods outlined in both GA-221-14 and GA-222-14 is careful sanding and treatment with joint compound as well as observing recommended drying times prior to redecoration.
Related Stories
Codes and Standards | Oct 30, 2017
AIA revises architect scope documents in latest contract form release
Design-bid-build forms last updated in 2007.
Codes and Standards | Oct 26, 2017
Boston’s Old South Church asks tower developer for $19 million for casting shade
Request highlights ongoing conflict between developers and residents over right to sunshine.
Codes and Standards | Oct 24, 2017
Asphalt roofing design guide now available in digital form
Recently updated Modified Bitumen Design Guide can be viewed on smartphones and tablets.
Codes and Standards | Oct 23, 2017
Energy efficiency investments on the rise; will increase next year
Survey of facility management executives shows onsite renewables, energy storage will spike in 2018.
Codes and Standards | Oct 20, 2017
AIA contract document updates include new BIM, digital data provisions
Documents are structurally different from 2007, 2008 versions.
Codes and Standards | Oct 19, 2017
IAPMO seeks proposals for 2021 Uniform Plumbing Code, Uniform Mechanical Code
The deadline is March 16, 2018.
Codes and Standards | Oct 18, 2017
States impacted by hurricanes are improving their energy efficiency policies
Florida, Texas, rise in ACEEE state energy efficiency scorecard.
Codes and Standards | Oct 17, 2017
Updated versions of EnergyPlus and OpenStudio building energy modeling tools released
Open-source apps include enhancements for urban-scale modeling.
Codes and Standards | Oct 16, 2017
New, comprehensive insurance exhibit released in AIA 2017 contract document updates
Will allow AIA to make updates more frequently as insurance market changes.
Codes and Standards | Oct 12, 2017
New AIA contract document designates responsibilities for sustainable projects
Roles of architects, contractors outlined in E204–2017.