flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Guides to wood construction in high wind areas updated

Codes and Standards

Guides to wood construction in high wind areas updated

The guides establish prescriptive, wind-resistive structural requirements for wood-frame buildings of different sizes and shapes.


By Peter Fabris, Contributing Editor | June 18, 2015
Guides to wood construction in high wind areas updated

Image: Pixabay

The American Wood Council (AWC) has released a series of updated Guides to Wood Construction in High Wind Areas

Based on provisions contained in AWC's 2012 Wood Frame Construction Manual (WFCM), the guides establish prescriptive, wind-resistive structural requirements for wood-frame buildings of different sizes and shapes. The provisions, developed specifically for builders, are directed toward ensuring structural integrity for resisting wind loads.

Separate documents address wind design requirements for 115-, 120-, 130-, 140-, 150-, and 160-miles-per-hour (Exposures B and C) wind zones. About half of the states in the United States have adopted the 2012 International Residential Code, which means the 2012 WFCM and these guides are accepted in those states.

The guides are available on the AWC website.

Related Stories

| Dec 23, 2014

EPA okays coal ash recycling in construction materials

The Environmental Protection Agency ruled that the use of coal ash produced in power plants can continue to be incorporated into construction materials.

| Dec 23, 2014

Dunkin’ Donuts launches green building certification for its restaurants

Dunkin Donuts has launched a green building certification program to help franchisees build sustainable, energy-efficient restaurants.

| Dec 23, 2014

EPA releases WaterSense draft specification for flushometer-valve toilets

The U.S. Environmental Protection Agency's WaterSense program has released a draft specification for water-efficient flushometer-valve toilets.

| Dec 23, 2014

American Iron and Steel Institute publishes design guide for new profiled steel diaphragm panels standard

The American Iron and Steel Institute (AISI) published AISI D310-14, “Design Examples for the Design of Profiled Steel Diaphragm Panels Based on AISI S310-13.”

| Dec 18, 2014

New federal regulations impact construction firms doing business with Uncle Sam

Federal contractors may be subject to several new rules in 2015 that impact how they are selected for contracts and how they do business with the federal government.

| Dec 18, 2014

ASHRAE/IES energy standard could become more applicable for global use

A proposed addendum to ANSI/ASHRAE/IES Standard 90.1-2013, Energy Standard for Buildings Except Low-Rise Residential Buildings would make the standard more applicable for use around the world.

| Dec 18, 2014

Boston testing mobile building permit tracking app

The app called Permit Finder could free city employees from having to respond to the 30 to 40 permit status-related calls they receive each week. 

| Dec 18, 2014

Deal on 2015 budget slashes most federal construction spending

The $1.1 trillion funding bill for fiscal year 2015 approved by Congress makes deep cuts in some construction programs, but the General Services Administration suffered just a short haircut by comparison.

| Dec 11, 2014

Mayor backs reform of Pittsburgh inspection, permitting practices

The proposal, among other things, would impose a rental registration program and fee targeted at keeping better track of problem landlords.

| Dec 11, 2014

Los Angeles mayor proposes earthquake retrofit program

The ambitious program would focus on some apartment buildings built before 1978 and concrete buildings constructed before 1976.

boombox1
boombox2
native1

More In Category


Contractors

Conflict resolution is a critical skill for contractors

Contractors interact with other companies seventeen times a day on average, and nearly half of those interactions (eight) involve conflicts, according to a report by Dodge Construction Network and Dusty Robotics. The study suggests that specialty trade contractors, in particular, rarely experience good resolution from conflicts. 



Warehouses

California bill would limit where distribution centers can be built

A bill that passed the California legislature would limit where distribution centers can be located and impose other rules aimed at reducing air pollution and traffic. Assembly Bill 98 would tighten building standards for new warehouses and ban heavy diesel truck traffic next to sensitive sites including homes, schools, parks and nursing homes.

halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021