flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Guides addressing fenestration anchorage updated

Codes and Standards

Guides addressing fenestration anchorage updated

First update to decade-old technical documents released.


By Peter Fabris, Contributing Editor | October 5, 2020

Courtesy Pixabay

The Fenestration and Glazing Industry Alliance (FGIA) has updated two documents addressing fenestration anchorage.

This is the first update to both documents:  AAMA 2501-20, “Voluntary Guide for Engineering Analysis of Anchorage Systems for Fenestration Products” and AAMA TIR-A14-20, “Fenestration Anchorage Guidelines.” The former was originally written in 2006; the latter was created in 2010.

“These documents are companions, and both provide guidance on what needs to be considered to determine appropriate anchorage of fenestration products,” said Sarah Erickson (Wausau Window and Wall Systems), chair of the FGIA Fenestration Anchorage Systems Task Group in a news release. “AAMA 2501 establishes the information that a design professional will require to be able to analyze an anchorage detail. AAMA TIR-A14 outlines several types of analysis that a design professional will perform on the most common anchorage details for fenestration products.”

AAMA 2501 establishes the minimum requirements for a fenestration anchorage system for load resistance with an appropriate safety factor that is equal to or greater than the project-specific design pressure requirements. AAMA TIR-A14 offers engineering rules and guidelines in the designs of fasteners used in the connection of fenestration to the surrounding building conditions.

Both documents were revised to align more closely with one another, including updates to reference material and the addition of details pertaining to significance of use. Small, but crucial, equation revisions were also included in the 2020 version of AAMA TIR-A14, the release says.

Related Stories

Codes and Standards | Jul 27, 2015

ICC, ASHRAE outline roles to consolidate IgCC and 189.1

"IgCC Powered by 189.1” will provide the design and construction industry with “the single, most-effective way to deliver sustainable, resilient, high-performance buildings," according to the trade groups behind the agreement.

Codes and Standards | Jul 27, 2015

Tennessee county considers local worker requirement on construction projects

A proposed amendment to the charter governing Nashville and Davidson County would mandate that 40% of work hours on city- or county-funded construction jobs costing at least $100,000 be completed by residents.

Codes and Standards | Jul 27, 2015

New guide for installation of mineral fiber pipe insulation on chilled water systems

Developed for professional insulation contractors, the 36-page guide recommends methods for insulating chilled water piping systems using a vapor-sealed mineral fiber pipe insulation. 

Green | Jul 23, 2015

NASA: U.S. headed for worst droughts in a millennium

Data from NASA shows carbon emissions could be the driving force behind devastating water shortages and record droughts in the western U.S.

Multifamily Housing | Jul 16, 2015

Minneapolis relaxes parking requirements on new multifamily buildings

The city cut the number of spots required for large developments by half. It also will accept plans with no parking spaces in certain cases.

Codes and Standards | Jul 16, 2015

Berkeley, Calif., adopts balcony inspection program following deadly collapse

Apartment building balconies will be subject to inspections every three years under new regulations adopted following a deadly collapse.

Codes and Standards | Jul 16, 2015

Oregon to spend $300 million for seismic updates on public buildings

A survey found that more than 1,000 Oregon school buildings face a high risk of collapse during earthquakes.

Smart Buildings | Jul 12, 2015

Office of Management and Budget asks agencies to consider climate change when budgeting for construction projects

For the first time, the U.S. Office of Management and Budget is asking agencies to submit budget plans that consider the effects of climate change on construction and maintenance of federal facilities.

Engineers | Jul 12, 2015

White paper explores low-flow toilets’ impact on drain lines, clogs

The research found that certain variables: toilet paper—along with the pipe slope and flush volume—are key variables in determining whether drain lines might be predisposed to clog.

Contractors | Jul 9, 2015

Opioid abuse blamed for increase in worker injuries, business losses

Insurance giant CNA says concerns are increasing in the construction industry.

boombox1
boombox2
native1

More In Category


Resiliency

U.S. is reducing floodplain development in most areas

The perception that the U.S. has not been able to curb development in flood-prone areas is mostly inaccurate, according to new research from climate adaptation experts. A national survey of floodplain development between 2001 and 2019 found that fewer structures were built in floodplains than might be expected if cities were building at random.



halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021