flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Guide predicts strongest, weakest AEC markets for 2013

Guide predicts strongest, weakest AEC markets for 2013

2013 Guide to U.S. AEC markets touts apartments, natural gas, senior housing and transmission and distribution.


By Posted by Tim Gregorski, Senior Editor | January 10, 2013

The JAGG Group, a consulting and publishing company dedicated to the architecture, engineering, environmental and construction industries, ranks the apartment market as the hottest for AEC firms working in the United States in 2013.

The company’s 270-page report – The 2013 Guide to the U.S. AEC Markets – ranks 40 separate market sectors served by AEC firms within seven broader categories: residential, commercial, institutional, transportation, water/wastewater, environmental and power.

The full list is available on the firm’s blog (http://www.aecinsight.com).

“Ranking the markets according to a variety of factors, including size, anticipated growth and intangibles unique to the individual market gives some guidance to firms planning their marketing and business development approach in 2013,” says report author Jerry Guerra. “The intention is to show the relative strength various markets served by AEC firms in the United States. It is essentially a summary of the data and information presented throughout the rest of the report, which is where the real meat of these rankings lies.”

The report predicts that the multifamily-for-rent market, which enjoyed solid growth and high activity in 2012, will repeat its strong performance in 2013. The apartment market is followed in the rankings by natural gas, senior housing, transmission/ distribution and health care as the five markets anticipated to be the healthiest in 2013.

On the opposite end of the ranking for the New Year are high-speed rail, nuclear power and brownfields.

The report ranks the markets according to a weighted scale that takes into account the market’s size, short-term growth projection (2013), long-term growth projection (annualized five-year estimate) and a variety of intangible factors.

The intangible category – worth 20% of the total – is included to adjust for factors outside of size and anticipated growth. For example, single-family housing is a massive market expected to have a high growth rate in both the short- and long-term. However, because the market is recovering from such a low point, competition is high (including many small firms still starving for work) and opportunities for traditional architecture and engineering firms are limited, the “intangible” category drags the single-family housing market closer to the middle of the pack (12th overall).

To support the market sector rankings and provide more insight into their outlook for 2013, the book includes more than 150 pages of analysis. The annual report – the sixth authored by the 10-year-old JAGG Group – also includes top industry trends, an analysis of the 2012 Election results, an overview of the industry and U.S. economy, and a glimpse of international market opportunities for 2013. +

 

 

Related Stories

Sponsored | Steel Buildings | Jan 25, 2022

Multifamily + Hospitality: Benefits of building in long-span composite floor systems

Long-span composite floor systems provide unique advantages in the construction of multi-family and hospitality facilities. This introductory course explains what composite deck is, how it works, what typical composite deck profiles look like and provides guidelines for using composite floor systems. This is a nano unit course.

Sponsored | Reconstruction & Renovation | Jan 25, 2022

Concrete buildings: Effective solutions for restorations and major repairs

Architectural concrete as we know it today was invented in the 19th century. It reached new heights in the U.S. after World War II when mid-century modernism was in vogue, following in the footsteps of a European aesthetic that expressed structure and permanent surfaces through this exposed material. Concrete was treated as a monolithic miracle, waterproof and structurally and visually versatile.

Urban Planning | Jan 25, 2022

Retooling innovation districts for medium-sized cities

This type of development isn’t just about innovation or lab space; and it’s not just universities or research institutions that are driving this change.

Sponsored | Resiliency | Jan 24, 2022

Norshield Products Fortify Critical NYC Infrastructure

New York City has two very large buildings dedicated to answering the 911 calls of its five boroughs. With more than 11 million emergency calls annually, it makes perfect sense. The second of these buildings, the Public Safety Answering Center II (PSAC II) is located on a nine-acre parcel of land in the Bronx. It’s an imposing 450,000 square-foot structure—a 240-foot-wide by 240-foot-tall cube. The gleaming aluminum cube risesthe equivalent of 24 stories from behind a grassy berm, projecting the unlikely impression that it might actually be floating. Like most visually striking structures, the building has drawn as much scorn as it has admiration. 

Coronavirus | Jan 20, 2022

Advances and challenges in improving indoor air quality in commercial buildings

Michael Dreidger, CEO of IAQ tech startup Airsset speaks with BD+C's John Caulfield about how building owners and property managers can improve their buildings' air quality.

Architects | Jan 17, 2022

OSPORTS adds Robert Hayes to lead operational and business development efforts

Hayes will guide the OSPORTS organization in its mission to offer a unique perspective to designing world-class facilities.

Architects | Jan 13, 2022

Hollywood is now the Stream Factory

Insatiable demand for original content, and its availability on a growing number of streaming platforms, have created shortages — and opportunities — for new sound stages.

Architects | Jan 13, 2022

Robert Eisenstat and Paul Mankins receive 2022 AIA Award for Excellence in Public Architecture

The award recognizes architects, public officials, or other individuals who design distinguished public facilities and advocate for design excellence.

3D Printing | Jan 12, 2022

Using 3D-printed molds to create unitized window forms

COOKFOX designer Pam Campbell and Gate Precast's Mo Wright discuss the use of 3D-printed molds from Oak Ridge National Lab to create unitized window panels for One South First, a residential-commercial high-rise in Brooklyn, N.Y.

boombox1
boombox2
native1

More In Category


Museums

The Tampa Museum of Art will soon undergo a $110 million expansion

In Tampa, Fla., the Tampa Museum of Art will soon undergo a 77,904-sf Centennial Expansion project. The museum plans to reach its $110 million fundraising goal by late 2024 or early 2025 and then break ground. Designed by Weiss/Manfredi, and with construction manager The Beck Group, the expansion will redefine the museum’s surrounding site.



Reconstruction & Renovation

Movement to protect historic buildings raises sharp criticism

While the movement to preserve historic buildings has widespread support, it also has some sharp critics with well-funded opposition groups springing up in recent years. Some opponents are linked to the Stand Together Foundation, founded and bankrolled by the Koch family’s conservative philanthropic organization, according to a column in Governing magazine.

halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021