Plumbing Manufacturers International (PMI) introduced parameters for the use of indoor recycled water.
The guidance was developed for water utilities to ensure that plumbing products function as intended by manufacturers. The water quality limits provide recommended ranges on 13 different parameters of water quality.
“This guidance will help water utilities to produce recycled water that will not hamper the performance of residential and commercial plumbing products that can be used with non-potable water, such as toilets and urinals,” said Kerry Stackpole, PMI’s CEO/executive director, in a news release.
Water districts may use recycled water, also known as reclaimed water or treated wastewater, for uses that do not require potable water, such as irrigation, power plant cooling, or toilet or urinal flushing. There are no federal standards for the use of this water. PMI’s recycled water parameters are not intended as guidance for public health and safety nor for plumbing products used for bathing, cooking, drinking or hygiene purposes (e.g., faucets, showerheads, personal hygiene devices and bidets).
Related Stories
Codes and Standards | Dec 8, 2021
Proposals to add more multifamily to Atlanta prompt drive for Buckhead to secede
City aims to increase housing as projections point to sharp population increase.
Codes and Standards | Dec 7, 2021
Design problems now the primary cause of construction claims and disputes
More likely to occur due to more tight timescales imposed upon third parties engaged in design.
Codes and Standards | Dec 5, 2021
New standard for Phase I environmental reports requires more research work on many sites
Update affects around 250,000 commercial real estate transactions a year.
Codes and Standards | Nov 30, 2021
Dept. of Energy publishes RFP for technical assistance on supporting better building codes
Addresses advanced standards to reduce energy consumption and GHG emissions.
Codes and Standards | Nov 29, 2021
Ithaca, N.Y., votes to electrify, decarbonize all its buildings
First initiative of its kind in U.S.
Codes and Standards | Nov 29, 2021
FAA seeking design of air traffic control towers of the future
Call for design submissions for safe, efficient structures.
Codes and Standards | Nov 28, 2021
Efficient electric water heaters in multifamily buildings significantly reduce carbon emissions
In buildings with 5+ units, water heating uses more energy than space heating, cooling, or lighting.
Codes and Standards | Nov 23, 2021
New York’s Labor Law Section 240 and how it affects general contractors
The ‘Scaffold Law’ was first enacted by the New York State Legislature in 1885 and is one of the single most-used laws in construction accident cases.
Codes and Standards | Nov 22, 2021
ABC’s Construction Technology Report finds focus on solving operational problems
More than half rely on project management software.
Codes and Standards | Nov 22, 2021
Contractors say 811 utility location system has significant flaws
More than half of firms in survey report damages, near misses because lines were unmarked or marked incorrectly.
