flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

GSA releases draft of federal low embodied carbon material standards

Codes and Standards

GSA releases draft of federal low embodied carbon material standards

The standard prescribes the use of best-performing (top 20%) materials and products to be used on all federal construction projects. 


By Peter Fabris, Contributing Editor | February 8, 2023
Image by David Mark from Pixabay
Image by David Mark from Pixabay

The General Services Administration recently released a document that outlines standards for low embodied carbon materials and products to be used on federal construction projects. (Read the draft of GSA Inflation Reduction Act Low Embodied Carbon Material Standards.)

Using the EPA’s Interim Determination, GSA is proposing a “substantially lower” standard for materials/products as defined by a global warming potential in the top performing 20%, (or lowest 20% in embodied greenhouse gas). If a top 20% product or material is unavailable in a project’s location, alternatives in the top 40% may be substituted.

But if a material in the top 20% is available elsewhere and could be transported to the project’s location from an unusual distance, GSA will analyze the transportation emissions for two or more of the options to determine if they are suitable.

“GSA’s goal is to procure materials and products available today and in the near future with the lowest levels of embodied carbon,” the document says. “GSA’s procurement actions and demand signals will help grow the United States market for even lower-carbon construction materials, and will spur ongoing industry innovation.”

Related Stories

Codes and Standards | Jul 20, 2021

New York, New Jersey legislatures may revamp bidding rules to promote low-carbon concrete

Contractors would have to certify that their concrete is in compliance.

Codes and Standards | Jul 19, 2021

Lack of information on carbon emissions challenges construction industry

Reports recommends whole-life carbon assessments on building projects.

Codes and Standards | Jul 15, 2021

Three drywall code-referenced publications have been updated

Include guidance on fire resistance, sound control, application, and finishing.

Codes and Standards | Jul 14, 2021

Biden’s infrastructure proposal includes massive investment in school buildings

‘Once in a lifetime opportunity’ to upgrade HVAC and other key systems.

Codes and Standards | Jul 13, 2021

Reluctance to fund maintenance on older condos is a serious problem

Owner associations defer needed work, putting properties at risk.

Codes and Standards | Jul 12, 2021

Regulations on hydrofluorocarbons reduce roof insulation options

Canada, some U.S. states ban HFC blowing agents used in closed-cell foam.

Codes and Standards | Jul 8, 2021

New York City shuts down 322 construction sites for unsafe conditions

Action comes as inspectors visit more than 2,100 sites.

Codes and Standards | Jul 7, 2021

Bechtel, Nautilus partner on sustainable, high-performance data centers

Facilities would use 70% less power for cooling, eliminate consumption of drinking water.

Codes and Standards | Jul 7, 2021

Surfside condo collapse could spur new legislation

Natl. Institute of Standards and Technology is investigating.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021