flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

GSA releases draft of federal low embodied carbon material standards

Codes and Standards

GSA releases draft of federal low embodied carbon material standards

The standard prescribes the use of best-performing (top 20%) materials and products to be used on all federal construction projects. 


By Peter Fabris, Contributing Editor | February 8, 2023
Image by David Mark from Pixabay
Image by David Mark from Pixabay

The General Services Administration recently released a document that outlines standards for low embodied carbon materials and products to be used on federal construction projects. (Read the draft of GSA Inflation Reduction Act Low Embodied Carbon Material Standards.)

Using the EPA’s Interim Determination, GSA is proposing a “substantially lower” standard for materials/products as defined by a global warming potential in the top performing 20%, (or lowest 20% in embodied greenhouse gas). If a top 20% product or material is unavailable in a project’s location, alternatives in the top 40% may be substituted.

But if a material in the top 20% is available elsewhere and could be transported to the project’s location from an unusual distance, GSA will analyze the transportation emissions for two or more of the options to determine if they are suitable.

“GSA’s goal is to procure materials and products available today and in the near future with the lowest levels of embodied carbon,” the document says. “GSA’s procurement actions and demand signals will help grow the United States market for even lower-carbon construction materials, and will spur ongoing industry innovation.”

Related Stories

| May 17, 2012

New standard for Structural Insulated Panels under development

ASTM International and NTA, Inc. are developing a new standard for Structural Insulated Panels (SIPs) that would create a path for U.S. manufacturers to meet the requirements of the Canadian building code.

| May 17, 2012

Webinar: ‘What Energy Codes and Standards Are Adopted Where and by Whom’

A June 12 webinar by the Construction Specifications Institute will outline what energy codes and standards have been adopted in each of the states for commercial buildings, and what is anticipated to be adopted in the future.

| May 17, 2012

California Governor orders new green standards on state buildings

California Gov. Jerry Brown issued an executive order recently that calls for all new or renovated state buildings of more than 10,000 sf to achieve LEED Silver or higher and incorporate clean, onsite power generation.

| May 17, 2012

New Zealand stadium roof collapse blamed on snow, construction defects

Heavy snowfall, construction defects, and design problems contributed to the collapse of the Stadium Southland roof in New Zealand in September 2010, a report has found.

| May 17, 2012

OSHA launches fall prevention campaign

The Occupational Safety and Health Administration (OSHA) recently launched an educational campaign to prevent deadly falls in the construction industry.

| May 15, 2012

Suffolk selected for Rosenwald Elementary modernization project

The 314-student station elementary school will undergo extensive modernization.

| May 10, 2012

Chapter 6 Energy Codes + Reconstructed Buildings: 2012 and Beyond

Our experts analyze the next generation of energy and green building codes and how they impact reconstruction.

| May 10, 2012

Resilience should be considered a sustainability factor

Since a sustainable building is one you don't have to rebuild, some building sustainability experts believe adding points for "resilience" to storms and earthquakes to the LEED sustainability rating tool makes sense.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021