Green plumbing fixtures these days are not only designed to be water and energy efficient, they are also designed to save time for installers, users, and maintenance personnel. Moreover, many new products are aimed at improving the user experience as much as they seek to improve the environment.
Modern water-efficient products are a far cry from the industry’s first attempts at low-flow, when the Energy Policy Act of 1992 first mandated the 1.6 gallons per flush (gpf) requirement for toilets. “I would be the first to say that when the industry introduced 1.6-gpf toilets, they were a bit of a disaster,” said Ken Martin, senior director of commercial sales for Delta Faucet Co. “The government mandated the change, the industry tried to scramble to catch up, and although they could easily lower the flows, the water closets didn’t perform. Now with the recent high-efficiency toilets, they’re actually putting some effort into designing those water closets so they actually do work.”
More and more Building Teams are looking to increase water efficiency in projects, but performance is still king. While green is great, fixtures still need to just plain work properly. “Users want them to work the same as or better than the old products,” said Rob Zimmerman, manager of engineering, water conservation, and sustainability for Kohler Co. “Performance matters more than water efficiency. If we’re going to make water-efficient toilets that don’t work as well, and we’ve been through this in the ’90s, people will not accept them.”
Since the dark days of those first 1.6-gpf toilets, manufacturers have met and surpassed the low-flow challenge. Today, there are more eco-friendly faucet, showerhead, and toilet fixtures than ever, and they perform better than ever. Now, manufacturers are moving to provide plenty of options and features that improve both user experience and ease of installation and maintenance.
Expanding the world of choices
If performance is the top consideration, providing lots of options is a close runner-up. “There are some products that are better fits for certain applications than others,” said Zimmerman. “What we’ve tried to do is provide those options.” While a waterless urinal may sound great for the environment, it might not be right for a particular building or application. But whatever the specification or preference, manufacturers aim to fit the bill.
Another benefit to options: they allow plumbers and contractors a step-down program of sorts to familiarize themselves with the new technologies and become comfortable working with them. Kohler offers a variety of flow capacities in both toilets and urinals for just that reason. In addition to the standard 1.6-gpf toilets and 1.0-gpf urinals, the company now offers 1.28- and 1.0-gpf toilets, one-pint urinals, and waterless urinals.
As low-flow becomes more commonplace, companies also are developing innovations that save water in other ways. Low-flow fixtures can be complemented with standard-flow fixtures that guard against wasting water. Delta takes its toilet fixtures a step further with its 81T series flush valves, equipped with automatic dual-flush technology. An H2Optics sensor determines whether to use a 1.6- or 1.1-gal flush by measuring not only the time a user spends at the toilet, as is common with many automatic dual-flush valves, but also the user’s distance from the toilet.
According to Martin, the technology is similar to that of a point-and-shoot digital camera, which sends out a beam of infrared light that bounces off the user to determine how far away he or she is. “The flush valve itself is going to know when you’re within a certain distance, whether sitting down versus standing up,” he said. “It couples that with time to make the determination on whether to go with a full flush or a partial flush, the concept being to try to predict whether you have a liquid load of a solid load to remove.”
Improved sensing technologies also can help faucets avoid unnecessary water waste. Delta’s Proximity Sensor creates a four-inch field around the faucet that activates the flow when a hand enters the field, without the need for sensors or infrared technology. The field is self-calibrating upon installation, adding convenience for the installer. The company also offers a manual option—a faucet that starts and stops with tap of a finger. The one-touch activation improves hygiene, while reducing the number of false activations.
Kohler’s Insight Touchless Technology adapts to the lighting conditions of a restroom to avoid unnecessary activation. Most of the new faucets also include preset shutoff features, which can be set to a stop the flow of water at a desired time.
Give users what they want
The pervasiveness of eco-friendly products on the market also means that manufacturers need to add something extra to their products to differentiate them from every other low-flow fixture out there. Improved user experience and easier installation and maintenance are features that manufacturers are focusing on to make their products stand out.
“We talked to facility managers and plumbers, people who are involved with servicing these products,” said Zimmerman. “They said the real issue for them is maintenance.” In response, Kohler developed the Hybrid energy system for its Insight Touchless Technology. The Hybrid system uses a layered capacitor that collects small electrical discharges from the battery, which the faucet then uses for power. The cell is able to store power, and since the Insight technology uses very small amounts of energy, the battery can last for 30 years or more, according to the manufacturer.
Manufacturers also concentrate on user experience to further improve low-flow technology. One of Delta’s major innovations concerns low-flow showerheads. “We went to 2.5 gallons per minute back when the toilets went to 1.6 gpf, and not a lot of people were all that happy with them. We’re kind of used to them now,” said Martin. The low-flow standard has since dropped to 1.5 gallons per minute, which is relatively easy to achieve simply by restricting the flow of water from the showerhead.
But, says Martin, that low flow can affect the user’s ability to keep warm and still get wet enough to wash. Delta’s solution is H2OKinetics technology, which keeps the flow at 1.5 gpm, but increases the size of the water droplets in order to save both water and energy. “The bigger the drop of water, the more heat it’s going to retain when it hits you,” he said. Since the water stays warmer, users are less likely to crank up the heat. That saves energy and will result in a more satisfactory showering experience.
What’s next for green plumbing?
[pagebreak]
Although plumbing fixture performance has greatly improved in the last two decades, the introduction of increasingly stringent low-flow standards has created problems of its own. “As the flows get driven down, it’s getting more and more challenging to do the job, so to speak, of what the product is supposed to do, particularly in the case of the flush valves or urinals,” said Martin. That is, there is concern whether the new fixtures provide enough water flow to flush the system.
The plumbing products industry is looking to the U.S. Environmental Protection Agency’s (EPA) WaterSense program to not only increase industry accountability that green products continue to perform, but also to raise consumer awareness and acceptance of these products.
“Their criteria in those standards are not just about lowering the flow, they’re also about how the fixture performs,” said Martin. He points to the showerhead standard that WaterSense recently released, which not only drops water use to two gallons a minute, but also provides for heating, thermal, and wetting property standards that have to be met by the showerhead as well.“In other words, you can’t just put a pencil stream of water out there and drop the flow,” said Martin. “It actually has to feel good.”
WaterSense also provides municipalities a sort of guide to follow when determining local flow standards, helping both manufacturers and specifiers by increasing code uniformity. “What we in the industry get worried about is when individual municipalities unilaterally start cranking down flow rates without any regard for safety or performance issues,” said Martin. “WaterSense is creating a common sort of standard, if you like, that municipalities can look to and say, We’ll just require that.”
The potential of not having enough water in drains and pipes to carry waste from toilets and urinals—the so-called “drain line carry problem”—is already starting to become the next big concern in eco-friendly plumbing. “Here’s the problem: you’ve got a big infrastructure already in place throughout the country that’s designed to remove waste on the assumption that these toilets are going to flush 3.5 or more gallons per flush,” said Martin. “These systems work fine at 3.5 gpf, but when they start dropping the water flows that go into the sewer, then you’re basically going to end up with sludge.”
Municipalities in the U.S. have not faced this problem yet, but that may be because low-flow toilets and urinals are still relatively new, said Kohler’s Zimmerman. “I have heard very sporadic comments and anecdotes out there, but nothing that suggests a major trend,” he said. “There are still a lot of water-wasting toilets, urinals, and faucets in the marketplace. As those gradually get changed out and the amount of water in the system is decreased, the drain line problem may sneak up on us.” BD+C
A ‘Nonaqueous’ Way to Conserve in the Restroom
While water and energy conservation get a lot of the fanfare, PMRG Realty, a building management company, found another way to help its client improve its ecological footprint at a Dallas office building. PMRG recently renovated the restrooms at the one million-sf Campbell Center office complex, but found that paper towels were being wasted. “They fall to the floor and aren’t picked up, so the tidiness and waste were the two main reasons we were looking for some sort of solution,” said Rebecca Jack, assistant property manager for the complex.
PMRG solved the property manager’s problem with Bobrick-Koala TowelMate Towel Dispenser Retainers. These stainless steel inserts fit into existing folded towel dispensers and limit the number of paper towels that can be dispensed at one time to just a single towel. This prevents guests from pulling out a handful of towels and possibly dropping some on the floor. According to the manufacturer, the TowelMate reduces paper usage and waste by as much as 20%. The inserts accommodate recycled paper towels for added conservation.
In the two months since they were installed in her building, says Jack, the retainers have worked flawlessly. “Because of this product, there’s no waste going on, and the restrooms are tidy,” she says. BD+C
Related Stories
| Aug 11, 2010
Idea Center at Playhouse Square: A better idea
Through a unique partnership between a public media organization and a performing arts/education entity, a historic building in the heart of downtown Cleveland has been renovated as a model of sustainability and architectural innovation. Playhouse Square, which had been working for more than 30 years to revitalize the city's arts district, teamed up with ideastream, a newly formed media group t...
| Aug 11, 2010
Pioneer Courthouse: Shaking up the court
In the days when three-quarters of America was a wild, lawless no-man's land, Pioneer Courthouse in Portland, Ore., stood out as a symbol of justice and national unity. The oldest surviving federal structure in the Pacific Northwest and the second-oldest courthouse west of the Mississippi, Pioneer Courthouse was designed in 1875 by Alfred Mullett, the Supervising Architect of the Treasury.
| Aug 11, 2010
Great Solutions: Business Management
22. Commercial Properties Repositioned for University USE Tocci Building Companies is finding success in repositioning commercial properties for university use, and it expects the trend to continue. The firm's Capital Cove project in Providence, R.I., for instance, was originally designed by Elkus Manfredi (with design continued by HDS Architects) to be a mixed-use complex with private, market-...
| Aug 11, 2010
Seven tips for specifying and designing with insulated metal wall panels
Insulated metal panels, or IMPs, have been a popular exterior wall cladding choice for more than 30 years. These sandwich panels are composed of liquid insulating foam, such as polyurethane, injected between two aluminum or steel metal face panels to form a solid, monolithic unit. The result is a lightweight, highly insulated (R-14 to R-30, depending on the thickness of the panel) exterior clad...
| Aug 11, 2010
AIA Course: Historic Masonry — Restoration and Renovation
Historic restoration and preservation efforts are accelerating throughout the U.S., thanks in part to available tax credits, awards programs, and green building trends. While these projects entail many different building components and systems, façade restoration—as the public face of these older structures—is a key focus. Earn 1.0 AIA learning unit by taking this free course from Building Design+Construction.
| Aug 11, 2010
AIA Course: Enclosure strategies for better buildings
Sustainability and energy efficiency depend not only on the overall design but also on the building's enclosure system. Whether it's via better air-infiltration control, thermal insulation, and moisture control, or more advanced strategies such as active façades with automated shading and venting or novel enclosure types such as double walls, Building Teams are delivering more efficient, better performing, and healthier building enclosures.
| Aug 11, 2010
Glass Wall Systems Open Up Closed Spaces
Sectioning off large open spaces without making everything feel closed off was the challenge faced by two very different projects—one an upscale food market in Napa Valley, the other a corporate office in Southern California. Movable glass wall systems proved to be the solution in both projects.
| Aug 11, 2010
AIA course: MEP Technologies For Eco-Effective Buildings
Sustainable building trends are gaining steam, even in the current economic downturn. More than five billion square feet of commercial space has either been certified by the U.S. Green Building Council under its Leadership in Energy and Environmental Design program or is registered with LEED. It is projected that the green building market's dollar value could more than double by 2013, to as muc...
| Aug 11, 2010
Tall ICF Walls: 9 Building Tips from the Experts
Insulating concrete forms have a long history of success in low-rise buildings, but now Building Teams are specifying ICFs for mid- and high-rise structures—more than 100 feet. ICF walls can be used for tall unsupported walls (for, say, movie theaters and big-box stores) and for multistory, load-bearing walls (for hotels, multifamily residential buildings, and student residence halls).
| Aug 11, 2010
World's tallest all-wood residential structure opens in London
At nine stories, the Stadthaus apartment complex in East London is the world’s tallest residential structure constructed entirely in timber and one of the tallest all-wood buildings on the planet. The tower’s structural system consists of cross-laminated timber (CLT) panels pieced together to form load-bearing walls and floors. Even the elevator and stair shafts are constructed of prefabricated CLT.