The American National Standards Institute (ANSI) approved ANSI-GBI 01-2019: Green Globes Assessment Protocol for Commercial Buildings as a consensus document and American National Standard.
The Green Globes rating system was first published in 2010. The revised 2019 standard includes advances in content including provisions on resilience, life cycle cost analysis, moisture control analysis, health and effectiveness, and many other market advances, such as higher efficiency plumbing fixture specifications and greatly expanded lighting and acoustic comfort sections.
GBI is the only green building organization to deliver its rating system through an ANSI-audited consensus process. The revised standard was registered and approved to continue its revision process every two years.
The final approved standard and proposals for changes to the standard, which can be submitted at any time using forms provided on GBI’s website, can be found at https://www.thegbi.org/ansi.
Related Stories
Codes and Standards | Dec 7, 2017
Many coastal states performing poorly to protect beaches, coastlines
The most vulnerable regions fare the worst in new study.
Codes and Standards | Dec 6, 2017
2017 wildfires highlight gaps in California’s approach to fire safety in urbanized areas
Better hazard mapping and retrofit programs could help.
Codes and Standards | Dec 5, 2017
Guide for understanding medical monitoring requirement of OSHA silica standard released
Center for Construction Research and Training gives advice on new regulation.
Codes and Standards | Dec 4, 2017
Trump tax proposal would kill historic tax credits
Developers would lose up to 20% discounts on some redevelopment projects.
Codes and Standards | Nov 30, 2017
Asheville, N.C. rezoning favors pedestrians, could change city’s character
Focus is on layout and look of new buildings rather than use.
Codes and Standards | Nov 29, 2017
Many New York City landlords have not addressed new flood codes
City revised building codes after Superstorm Sandy, but many owners not required to upgrade.
Codes and Standards | Nov 28, 2017
Nail-Laminated timber Canadian design and construction guide released
Includes practical strategies and guidance with lessons from real-life projects.
Codes and Standards | Nov 27, 2017
New standard to monitor building sealing performance
Increased understanding of how materials act when stretched and compressed is the goal.
Codes and Standards | Nov 27, 2017
Denver voters approve green roof mandate
Buildings of 25,000 sf or larger required to install vegetative roof or PVs.
Codes and Standards | Nov 21, 2017
USGBC adopts ‘RELi’ resilient building and design standard
The standard prescribes methods for designing more resilient buildings and communities.
