With new and untested indoor environmental monitoring sensors and sensor-based systems coming on the market, there is confusion and uncertainty in the marketplace, according to the International WELL Building Institute (IWBI).
In an effort to provide guidance to developers and owners, IWBI and other building standard and certification organizations RESET, the Building Research Establishment (BRE), and the Green Building Council of Australia (GBCA) are developing global standards and guidelines for indoor and outdoor environmental monitoring systems and sensors. These standards are meant to work seamlessly with WELL, LEED, BREEAM, RESET, and Green Star.
Data collected at the Well Living Lab will be used to develop the standards. The sensor-filled lab is a reconfigurable space where researchers monitor and test technologies and protocols with human subjects in simulated environments.
The effort is part of a movement among building certification bodies to coordinate their aspects of their standards to make it easier for facility owners to earn multiple certifications.
Related Stories
Codes and Standards | May 15, 2018
Blast testing of loaded mass timber structures yields positive results
Four tests covered a spectrum of blast loads.
Codes and Standards | May 14, 2018
Maryland makes general contractors liable for failure of subs to pay employees
GCs could have to pay for up to three times the wages owed.
Codes and Standards | May 10, 2018
Data collection, machine learning boost building efficiency
Sensors, software algorithms squeeze out waste.
Codes and Standards | May 9, 2018
OSHA and state safety agencies write more than 100 silica citations in 6 months
Actions tending to come with investigation of other site conditions.
Codes and Standards | May 8, 2018
Powerhouse coalition builds energy positive buildings
The goal: build buildings that provide more power than they cost to build, run, and demolish.
Codes and Standards | May 7, 2018
Plan advances in Los Angeles for Climate Emergency Mobilization Department
Would oversee efforts to reduce greenhouse gas emissions across the city.
Codes and Standards | May 3, 2018
Data collection, machine learning boost building efficiency
Sensors, software algorithms squeeze out waste.
Codes and Standards | May 2, 2018
Energy Department releases Updated EnergyPlus and OpenStudio building energy modeling tools
The tools can now accept input in epJSON format.
Codes and Standards | May 1, 2018
ASHRAE publishes new energy simulation-aided design standard
Requires building energy modeling during schematic design.
Codes and Standards | Apr 30, 2018
CALGreen projects pre-approved for streamlined LEED v4 requirements
Reduces need to run additional energy models.
