flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

French firm proposes sand and bacteria as building material in the Sahara

Building Materials

French firm proposes sand and bacteria as building material in the Sahara

The method relies on the sun and wind to do most of the building.


By BD+C Staff | April 14, 2015
French firm proposes sand and bacteria as building material in the Sahara

Paris-based XTU Architects presented the idea as a way to construct a city in the mostly inhospitable Sahara desert. Renderings courtesy XTU Architects

Deserts are already abundant with sand, so why not construct buildings out of it? This was the thought behind Flohara, a collection of shelters Paris-based firm XTU Architects thought up for the Morocco Pavilion in the 2014 Venice Biennale. 

The firm marketed the idea as a way to construct a city in the Sahara, a step toward making deserts more habitable and sustainable, as the need to transport additional building material is decreased (water, on the other hand, is another story).

Gizmodo reports that the construction of shelters using the method developed by XTU Architects can be broken down in three steps. First, “bubbles” that function as support skeletons for building upon must be inflated and placed in the desired site toward the wind. Next, sand, water, a hydogel, and the bacteria Sporosarcina pasteurii (which hardens sand) is mixed and sprayed onto the bubbles. Finally, the structure will be left alone as the sand and sun slowly build and harden the structure before the bubble is deflated.

Read more at Gizmodo.

 

Related Stories

| Nov 29, 2011

Suffolk Construction breaks ground on Boston residential tower

Millennium Place III is a $220 million, 256-unit development that will occupy a full city block in Boston’s Downtown Crossing.

| Nov 28, 2011

Leo A Daly and McCarthy Building complete Casino Del Sol expansion in Tucson, Ariz.

Firms partner with Pascua Yaqui Tribe to bring new $130 million Hotel, Spa & Convention Center to the Tucson, Ariz., community.

| Nov 28, 2011

Armstrong acquires Simplex Ceilings

Simplex will become part of the Armstrong Building Products division.

| Nov 22, 2011

Corporate America adopting revolutionary technology

The survey also found that by 2015, the standard of square feet allocated per employee is expected to drop from 200 to estimates ranging from 50 to 100 square feet per person dependent upon the industry sector. 

| Nov 22, 2011

Report finds that L.A. lags on solar energy, offers policy solutions

Despite robust training programs, L.A. lacks solar jobs; lost opportunity for workers in high-need communities.

| Nov 22, 2011

New Green Matters Conference examines emerging issues in concrete and sustainability

High-interest topics will be covered in technical seminars, including infrared reflective coatings for heat island mitigation, innovative uses of concrete to provide cooling and stormwater management, environmental benefits of polished concrete, and advancements in functional resilience of architectural concrete.

| Nov 18, 2011

Centre for Interactive Research on Sustainability opens

Designed to exceed LEED Platinum, the Centre for Interactive Research on Sustainability (CIRS) is one of the most innovative and high performance buildings in North America today, demonstrating leading-edge green building design products, technologies, and systems.

| Nov 16, 2011

CRSI recommends return to inch-pound markings

The intention of this resolution is for all new rollings of reinforcing steel products to be marked with inch-pound bar markings no later than January 1st, 2014. 

| Nov 9, 2011

American Standard Brands joins the Hospitality Sustainable Purchasing Consortium

  American Standard will collaborate with other organizations to build an industry-wide sustainability performance index.

| Nov 8, 2011

WEB EXCLUSIVE: Moisture-related failures in agglomerated floor tiles

Agglomerated tiles offer an appealing appearance similar to natural stone at a lower cost. To achieve successful installations, manufacturers should provide design data for moisture-related dimensional changes, specifiers should require in-situ moisture testing similar to those used for other flooring materials, and the industry should develop standards for fabrication and installation of agglomerated tiles.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021