A former Occupational Safety and Health Administration official has been publishing information about fines and safety violations after the Trump Administration halted the practice.
OSHA, under Trump, had ceased releasing so-called ‘shaming’ press releases with information about companies who were cited or received major fines for not adhering to safety regulations. Jordan Barab, former deputy assistant secretary at OSHA under President Barack Obama, has been publishing the information on his blog, “Confined Space.”
Barab asserts that the descriptive press releases helped drive home the importance of workplace safety. This is a necessary tool, Barab, asserts because OSHA has a relatively small inspection staff.
Barab has posted 2017 citation and fine information from January 18 to February 14, with several construction companies mentioned on the list.
Related Stories
| Nov 16, 2012
South Dakota prefers LEED over building code on state projects
“(LEED is) much better than a mandatory building code because you get a little wiggle room in these projects,” said Mike Mueller, a spokesman for the South Dakota Bureau of Administration.
| Nov 16, 2012
AAMA publishes quality assurance guidelines for Polyamide Thermal Barriers
The American Architectural Manufacturers Association (AAMA) has published QAG-2-12, Voluntary Quality Assurance Processing Guide for Polyamide Thermal Barriers.
| Nov 16, 2012
New ANSI/BIFMA standards developed for educational seating
The American National Standards Institute (ANSI) has approved the newly developed safety and performance standard for educational seating: ANSI/BIFMA X6.1-2012—the first of its kind.
| Nov 16, 2012
Green building councils in 62 countries expect 60% of their work to be green by 2015
More than half of the respondents to a survey of members of the Green Building Council in 62 countries expect green projects to comprise 60% of their work by 2015.
| Nov 16, 2012
Voters approve fewer construction ballot measures in 2012 than in 2008
Voters passed fewer ballot measures related to construction projects this year than they did in 2008, according to an analysis by the Associated General Contractors of America.
| Nov 9, 2012
New ANSI/BIFMA standard adds point for lower formaldehyde emissions
The ANSI/BIFMA e3-2012 Furniture Sustainability Standard now includes an additional point for furniture products that meet a new, lower formaldehyde emissions limit.
