The Surfside Working Group, a coalition of seven Florida engineering and building professional associations, has recommended that the state impose mandatory building inspections for aging high-rise buildings.
The group was formed following the collapse of the Champlain Towers South condominium buildings in Surfside. The 12-story building collapsed in a matter of seconds, killing 98.
The building needed costly repairs, but no statewide inspection laws or building code requires structural and safety re-inspections for aging high-rises. The panel’s recommendation is for all Florida buildings greater than 2,000 sf with more than 10 occupants to have mandatory structural inspections. Recertification would be required after 30 years, and every 10 years thereafter.
If the building is close to saltwater, it would have to be inspected after 20 years with re-inspections every seven years. The report is now in the hands of state lawmakers, but they are not obligated to act on it. The panel is hopeful, though, that the report will spur action.
Related Stories
Codes and Standards | May 15, 2018
Blast testing of loaded mass timber structures yields positive results
Four tests covered a spectrum of blast loads.
Codes and Standards | May 14, 2018
Maryland makes general contractors liable for failure of subs to pay employees
GCs could have to pay for up to three times the wages owed.
Codes and Standards | May 10, 2018
Data collection, machine learning boost building efficiency
Sensors, software algorithms squeeze out waste.
Codes and Standards | May 9, 2018
OSHA and state safety agencies write more than 100 silica citations in 6 months
Actions tending to come with investigation of other site conditions.
Codes and Standards | May 8, 2018
Powerhouse coalition builds energy positive buildings
The goal: build buildings that provide more power than they cost to build, run, and demolish.
Codes and Standards | May 7, 2018
Plan advances in Los Angeles for Climate Emergency Mobilization Department
Would oversee efforts to reduce greenhouse gas emissions across the city.
Codes and Standards | May 3, 2018
Data collection, machine learning boost building efficiency
Sensors, software algorithms squeeze out waste.
Codes and Standards | May 2, 2018
Energy Department releases Updated EnergyPlus and OpenStudio building energy modeling tools
The tools can now accept input in epJSON format.
Codes and Standards | May 1, 2018
ASHRAE publishes new energy simulation-aided design standard
Requires building energy modeling during schematic design.
Codes and Standards | Apr 30, 2018
CALGreen projects pre-approved for streamlined LEED v4 requirements
Reduces need to run additional energy models.