Florida legislators approved a bill that would limit the amount of retainage that can be withheld from contractor payments on state and local publicly funded projects.
With only one dissenter, the body voted to reduce retainage from 10% to 5%. The retainage rate is the amount withheld from payments until 50% of the project is complete.
The new regulation will not apply to projects valued at $200,000 or less; Florida DOT projects approved under Florida Statutes Ch. 337; and projects entered into, pending approval or advertised by a government entity on or before Oct. 1, 2020. Pending approval by the governor, the new law will go into effect Oct. 1, 2020.
According to Construction Dive, Illinois changed its laws last August to cap retainage at 10% on most private projects, with a reduction to 5% once a contractor completes 50% of its contract scope of work. This is similar to the Illinois retainage laws governing public projects.
Related Stories
Codes and Standards | Mar 6, 2017
ConsensusDocs updates standard short contract editions
The updates address industry changes impacting insurance, legal, technology, and terminology.
Codes and Standards | Mar 3, 2017
ASCE updates standard for structures using tensile membrane
The new sstandard combines guidelines for conventional tensile membrane structures with frame-covered membrane structures.
Codes and Standards | Mar 1, 2017
EPA's 2017 Construction General Permit now in effect
The regulation governs compliance with effluent limits.
Codes and Standards | Feb 28, 2017
Concern grows for high tide flood vulnerability in Mid-Atlantic states
Washington, D.C., and Annapolis, Md., could flood every three days by 2045.
Codes and Standards | Feb 27, 2017
Green building saves operating costs and boosts asset value
A new report shows 14% cost savings and a 7% increase in value when green standards are met.
Codes and Standards | Feb 24, 2017
Scant data hampering energy, water efficiency at sports venues
New NIBS report says baseline information needs further development.
Codes and Standards | Feb 22, 2017
Plans for WELL Building Standard include linkage with other green building standards
The planned updated version will be customizable for any building type.
Codes and Standards | Feb 21, 2017
Aging building code inspectors and government belt-tightening could cause crisis
Inspectors are edging toward retirement with no understudies in place.
Codes and Standards | Feb 20, 2017
AISI publishes three new cold-formed steel framing research reports
Seismic simulation, roof trusses, steel-to-steel and sheathing-to-steel connections are examined in the reports.
Codes and Standards | Feb 17, 2017
New energy design guide for metal building systems now available
The second edition incorporates more recent IECC and ASHRAE standards.