flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

First resilience benchmarks for U.S. communities released

Codes and Standards

First resilience benchmarks for U.S. communities released

Provides way to evaluate current state of resilience and guidance for areas of improvement.


By Peter Fabris, Contributing Editor | January 17, 2019

First-of-their-kind resilience benchmarks for U.S. communities that can be used to evaluate the current state of resilience and guidance for areas of improvement has been released.

The benchmarks, developed by the International Code Council and the Alliance for National and Community Resilience (ANCR), consist of nine requirements aimed at increasing the resilience of communities, including the adoption, administration, and enforcement of building codes. The benchmarks encourage local governments to adopt building codes and to provide the human, technical and financial resources necessary to support permitting, plan review, and inspections.

“A holistic approach to identifying and incorporating resilience measures into a community’s building stock, including the adoption of the latest building codes, supports the mitigation of damage from natural disasters and increases the overall resiliency of our communities,” said ANCR Executive Director Ryan Colker in a news release. “These benchmarks provide a standard for local and state governments to follow ensuring they are well prepared for the next disaster.”

State and local government officials contributed to the development of the buildings benchmarks, including representatives from the Virginia Department of Housing and Community Development and the New York City Department of Buildings. Representatives from across the building industry, including designers, manufacturers, trade groups and nonprofits, were also involved in the development of the benchmarks.

Related Stories

| Nov 14, 2013

Document on gypsum boards sets stage for preparing Environmental Product Declaration

The Gypsum Association has completed the development of a product category rules (PCR) document for North American gypsum boards.

| Nov 14, 2013

ISO, FLASH team up to promote stronger building codes

ISO has joined the national nonprofit Federal Alliance for Safe Homes (FLASH) to encourage communities to build disaster-resistant buildings that can withstand hurricanes, tornadoes, earthquakes, and other catastrophic events.

| Nov 6, 2013

Cost to small businesses from silica rule is raised by progressive group

The silica-dust rule from the Occupational Safety and Health Administration could put small businesses at a disadvantage on the cost of complying with the mandate, according to the Center for Progressive Reform.

| Nov 6, 2013

Uneven snow load concern prompts structural study of Minnesota college auditorium roof

The roof of the Memorial Auditorium of Concordia College in Minnesota will undergo a complete structural analysis because it was built to 1946 codes and may not be able to accommodate uneven snow loads.

| Nov 6, 2013

Dallas’s goal of carbon neutrality by 2030 advances with second phase of green codes

Dallas stands out as one of the few large cities that is enforcing a green building code, with the city aiming to be carbon neutral by 2030.

| Nov 6, 2013

Task force to examine resiliency in the face of climate change

President Barack Obama recently signed an executive order related to climate change and disaster-management efforts during severe weather events and other disasters.

| Nov 6, 2013

USGBC Northern California chapter focuses on improving indoor environments in green buildings

The Northern California branch of the U.S. Green Building Council is leading the “Building Health Initiative” that seeks to improve the indoor environment of green buildings.

| Oct 31, 2013

OSHA enacts 47-day extension for comment period on silica-exposure rule

The Occupational Safety and Health Administration has extended the public comment period on its silica-dust exposure rule by 47 days.

| Oct 31, 2013

Updates to California’s building codes take effect Jan. 1

Green-building and accessibility are the major themes of the 2013 updates to California’s construction codes that are set to take effect Jan. 1.

| Oct 31, 2013

IECC code updates include better lighting controls and new HVAC technology

The proposed new code will increase the mandatory installation of occupancy sensors and daylighting controls to many new types of spaces.

boombox1
boombox2
native1

More In Category

Sustainability

Grimshaw launches free online tool to help accelerate decarbonization of buildings

Minoro, an online platform to help accelerate the decarbonization of buildings, was recently launched by architecture firm Grimshaw, in collaboration with more than 20 supporting organizations including World Business Council for Sustainable Development (WBCSD), RIBA, Architecture 2030, the World Green Building Council (WorldGBC) and several national Green Building Councils from across the globe.




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021