The Uni-Bell PVC Pipe Association (PVCPA) recently published the first North American industry-wide environmental product declaration (EPD) for water and sewer piping.
The document has been verified by NSF Sustainability, a division of global public health organization NSF International. The EPD, developed in compliance with international environmental management guidelines (ISO 14025), benchmarks the impacts of seven PVC pipe products across their life cycles.
Impacts covered include PVC pressure pipe for potable water, reclaimed water and sewer force main systems, as well as PVC non-pressure pipe for storm sewer and sanitary sewer systems.
The EPD pinpoints areas of greatest environmental impact as well as the environmental benefits of utilizing PVC piping. For example, the use phase of pressurized potable water pipe, during which pumps overcome friction to move water through pipe, was found to contribute the greatest environmental impacts throughout the product’s entire life cycle. The EPD also identified advantages in this stage such as the smooth interior surface of PVC pipe that minimizes friction and therefore energy consumption. PVC pipe is also corrosion resistant and has a proven durability in excess of 100 years, requiring less frequent replacement.
Related Stories
| Nov 26, 2012
How to boost resilient systems that are sustainable
Cities of the future can be both more resilient and more sustainable by promoting strategies that include solar power and green roofs, programs that minimize demand for energy, rain gardens, and permeable pavement.
| Nov 26, 2012
Developer of nation’s first LEED platinum skyscraper focuses on carbon reduction
The Durst Organization, the developer of the first LEED platinum certified skyscraper in the country, says it will not seek LEED certification for its residential pyramid planned for New York’s West 57th Street.
| Nov 26, 2012
Questions linger over ability of Miami's newer high-rises to withstand hurricanes
Some towers in Miami, rebuilt after a hurricane in 2005, were allowed to be constructed under older building codes instead of newer ones created after Hurricane Wilma.
| Nov 26, 2012
Changes in development and building standards needed for health of Potomac River
The Potomac River’s health stands to suffer if the region does not change its development and building standards, according to the Potomac Conservancy.
| Nov 16, 2012
South Dakota prefers LEED over building code on state projects
“(LEED is) much better than a mandatory building code because you get a little wiggle room in these projects,” said Mike Mueller, a spokesman for the South Dakota Bureau of Administration.
| Nov 16, 2012
AAMA publishes quality assurance guidelines for Polyamide Thermal Barriers
The American Architectural Manufacturers Association (AAMA) has published QAG-2-12, Voluntary Quality Assurance Processing Guide for Polyamide Thermal Barriers.
| Nov 16, 2012
New ANSI/BIFMA standards developed for educational seating
The American National Standards Institute (ANSI) has approved the newly developed safety and performance standard for educational seating: ANSI/BIFMA X6.1-2012—the first of its kind.
