The Uni-Bell PVC Pipe Association (PVCPA) recently published the first North American industry-wide environmental product declaration (EPD) for water and sewer piping.
The document has been verified by NSF Sustainability, a division of global public health organization NSF International. The EPD, developed in compliance with international environmental management guidelines (ISO 14025), benchmarks the impacts of seven PVC pipe products across their life cycles.
Impacts covered include PVC pressure pipe for potable water, reclaimed water and sewer force main systems, as well as PVC non-pressure pipe for storm sewer and sanitary sewer systems.
The EPD pinpoints areas of greatest environmental impact as well as the environmental benefits of utilizing PVC piping. For example, the use phase of pressurized potable water pipe, during which pumps overcome friction to move water through pipe, was found to contribute the greatest environmental impacts throughout the product’s entire life cycle. The EPD also identified advantages in this stage such as the smooth interior surface of PVC pipe that minimizes friction and therefore energy consumption. PVC pipe is also corrosion resistant and has a proven durability in excess of 100 years, requiring less frequent replacement.
Related Stories
Codes and Standards | Mar 2, 2015
Nevada moves to suspend prevailing wage rules on school projects
The Nevada Senate approved a bill that would suspend prevailing wage rules on school projects.
Codes and Standards | Mar 2, 2015
Proposed energy standard for data centers, telecom buildings open for public comment
The intent of ASHRAE Standard 90.4P is to create a performance-based approach that would be more flexible and accommodating of innovative change.
Codes and Standards | Feb 22, 2015
Louisiana officials critical of stricter building standards in flood-prone areas
Buildings would have to be built either two or three feet above the base flood elevation for a 100-year flood or above the base elevation for a 500-year flood.
Codes and Standards | Feb 18, 2015
Buildings with rocking steel-braced frames are advantageous in earthquakes
Research at Case Western Reserve University has found that buildings that rock during an earthquake and return to plumb would withstand seismic shaking better than structural designs commonly used today in vulnerable zones of California and elsewhere.
Codes and Standards | Feb 18, 2015
USGBC concerned about developers using LEED registration in marketing
LEED administrators are concerned about a small group of developers or project owners who tout their projects as “LEED pre-certified” and then fail to follow through with certification.
Codes and Standards | Feb 12, 2015
ASHRAE, USGBC, IES consider biomass requirements in green building standard
The proposal would add biomass to approved renewables.
Codes and Standards | Feb 12, 2015
New Appraisal Institute form aids in analysis of green commercial building features
The Institute’s Commercial Green and Energy Efficient Addendum offers a communication tool that lenders can use as part of the scope of work.
Codes and Standards | Feb 8, 2015
ASHRAE, IAQA approve consolidation
Under the consolidation, IAQA will become a part of the ASHRAE organization while maintaining its own brand and Board of Directors.
Codes and Standards | Feb 6, 2015
Obama executive order requires federal construction projects to consider flood damage caused by climate change
To meet the new standard, builders must build two feet above the currently projected elevation for 100-year floods for most projects.
HVAC | Feb 6, 2015
ASHRAE, REHVA publish guide to chilled beam systems
The guide provides tools and advice for designing, commissioning, and operating chilled-beam systems.
