The Uni-Bell PVC Pipe Association (PVCPA) recently published the first North American industry-wide environmental product declaration (EPD) for water and sewer piping.
The document has been verified by NSF Sustainability, a division of global public health organization NSF International. The EPD, developed in compliance with international environmental management guidelines (ISO 14025), benchmarks the impacts of seven PVC pipe products across their life cycles.
Impacts covered include PVC pressure pipe for potable water, reclaimed water and sewer force main systems, as well as PVC non-pressure pipe for storm sewer and sanitary sewer systems.
The EPD pinpoints areas of greatest environmental impact as well as the environmental benefits of utilizing PVC piping. For example, the use phase of pressurized potable water pipe, during which pumps overcome friction to move water through pipe, was found to contribute the greatest environmental impacts throughout the product’s entire life cycle. The EPD also identified advantages in this stage such as the smooth interior surface of PVC pipe that minimizes friction and therefore energy consumption. PVC pipe is also corrosion resistant and has a proven durability in excess of 100 years, requiring less frequent replacement.
Related Stories
Codes and Standards | May 8, 2018
Powerhouse coalition builds energy positive buildings
The goal: build buildings that provide more power than they cost to build, run, and demolish.
Codes and Standards | May 7, 2018
Plan advances in Los Angeles for Climate Emergency Mobilization Department
Would oversee efforts to reduce greenhouse gas emissions across the city.
Codes and Standards | May 3, 2018
Data collection, machine learning boost building efficiency
Sensors, software algorithms squeeze out waste.
Codes and Standards | May 2, 2018
Energy Department releases Updated EnergyPlus and OpenStudio building energy modeling tools
The tools can now accept input in epJSON format.
Codes and Standards | May 1, 2018
ASHRAE publishes new energy simulation-aided design standard
Requires building energy modeling during schematic design.
Codes and Standards | Apr 30, 2018
CALGreen projects pre-approved for streamlined LEED v4 requirements
Reduces need to run additional energy models.
Codes and Standards | Apr 26, 2018
New standard supports community resilience
ASTM International guidance supports cost-effective ways to withstand and recover from disasters.
Codes and Standards | Apr 25, 2018
Lessons learned from decades of Superfund cleanups guide contaminated land reuse
Sites repurposed for residential, commercial use, and solar energy generation.
Codes and Standards | Apr 24, 2018
Vibrant downtown core the key for urban multifamily development
Nighttime activity makes the difference.
Codes and Standards | Apr 19, 2018
ILFI launches new Zero Carbon Certification
Offers greater flexibility around project fuel types and offsetting renewables.