When the State University of New York (SUNY) University Hospital in Syracuse, NY embarked on a vertical expansion, it was lauded as one of Central New York’s most ambitious construction projects since opening the University Hospital in 1965. The six-story vertical expansion will rise above the East Wing with floors dedicated to oncology, cardiology and neurology services.
One of the highlights is the addition of the Golisano Children’s Hospital on the top two floors of the six-story addition. This included 50 private patient rooms, family sleep and dining as well as playrooms and a family resource center among other amenities. This addition increased the amount of space dedicated to pediatric medicine from 18,000 square feet to 87,000 square feet.
Since the project added new floors, stairwell enclosures were also added. Traditionally, stairwells are relegated to the back of the building, and are usually closed-off, dimly lit and seldom used. Today, stairwells are becoming a prominent design feature and its use is encouraged more and more for the health benefits that stair climbing provides. As the New York City’s Active Design Guidelines note: “most building codes look at stairs as part of an emergency access and exit system. But they also point out that buildings that better incorporate everyday stair use may actually improve occupant safety in emergencies by making the stairs more accessible, better lit, and wider. Furthermore, whereas code mandated fire separations are traditionally met through the use of masonry or gypsum board with solid metal doors, the guidelines note that exit stairs can be made more visible and appealing by using fire rated glass enclosures.” (To learn more on reinventing stairways with fire rated glass, click here).
Since the building code requires 1 hour of fire-resistance-rated protection for buildings 1-3 stories and 2 hours of fire-resistance-rated protection for buildings 4 stories of more, the glass used for these stairwell enclosures must meet fire-resistance-rated requirements. This means the glazing must meet ASTM E-119/NFPA 251/UL 263 to ensure that building occupants are protected from fire, smoke and dangerous radiant heat as they exit the building or await rescue.
To meet code and design and requirements for the 2-hour stairwells in SUNY University Hospital’s vertical expansion, SAFTI FIRST provided SuperLite II-XL 120 in GPX Architectural Series Framing. Both the glass and the framing meet ASTM E-119/NFPA 251/UL 263 for 2 hours. For the top two floors housing the Golisano Children’s Hospital, the architects at Karlsberger wanted to create a fun, whimsical environment for the children receiving treatment at the hospital so SAFTI FIRST incorporated digital printed glass to the SuperLite II-XL 120. SAFTI FIRST worked closely with Northeastern Plate Glass to guarantee that the correct digital printed glass specified by the architect were used in making the custom SuperLite II-XL 120 units in SAFTI FIRST’s manufacturing facility in Merced, California. Once everything was done, SAFTI FIRST coordinated with Northeastern Plate Glass’s schedule to ensure that both the glass and frames were shipped to the job site on time.
2-hour stairwell re-imagined as outer space with SuperLite II-XL 120 with digital printed glass in GPX Architectural Series Framing by SAFTI FIRST.
With the architect, glazier and fire rated glazing manufacturer working together, the patients and staff at SUNY University Hospital can enjoy fun, whimsical and reliable fire protection in their stairwells that meet both the code and aesthetic requirements of the project.
******
Project Details: SUNY University Hospital Vertical Expansion in Syracuse, NY
Architect: Karlsberger Architecture, Inc.
Glazier: Northeastern Plate Glass
Products Used: SuperLite II-XL 120 with Digital Printed Glass in GPX Architectural Series Framing
Application: 2-hour Stairwell
Related Stories
| May 13, 2014
19 industry groups team to promote resilient planning and building materials
The industry associations, with more than 700,000 members generating almost $1 trillion in GDP, have issued a joint statement on resilience, pushing design and building solutions for disaster mitigation.
| May 5, 2014
Tragic wired glass injury makes headlines yet again
In the story, a high school student pushed open a hallway door glazed with wired glass. His arm not only broke the glass, but penetrated it, causing severe injuries. SPONSORED CONTENT
Sponsored | | May 3, 2014
Fire-rated glass floor system captures light in science and engineering infill
In implementing Northwestern University’s Engineering Life Sciences infill design, Flad Architects faced the challenge of ensuring adequate, balanced light given the adjacent, existing building wings. To allow for light penetration from the fifth floor to the ground floor, the design team desired a large, central atrium. One potential setback with drawing light through the atrium was meeting fire and life safety codes.
| Apr 25, 2014
Recent NFPA 80 updates clarify fire rated applications
Code confusion has led to misapplications of fire rated glass and framing, which can have dangerous and/or expensive results. Two recent NFPA 80 revisions help clarify the confusion. SPONSORED CONTENT
| Apr 8, 2014
Fire resistive curtain wall helps The Kensington meet property line requirements
The majority of fire rated glazing applications occur inside a building to allow occupants to exit the building safely or provide an area of refuge during a fire. But what happens when the threat of fire comes from the outside? This was the case for The Kensington, a mixed-use residential building in Boston.
Sponsored | | Jan 30, 2014
Transparent, fire rated stairwell enhances design of renovated Cincinnati Art Museum
When the Cincinnati Art Museum embarked on an $11 million renovation, the architects wanted the entrance and main stair to be as inviting as possible. Transparent, fire rated glazing from SAFTI FIRST was a key component of the design solution.
| Jan 13, 2014
AEC professionals weigh in on school security
An exclusive survey reveals that Building Teams are doing their part to make the nation’s schools safer in the aftermath of the Sandy Hook tragedy.
| Jan 10, 2014
What the states should do to prevent more school shootings
To tell the truth, I didn’t want to write about the terrible events of December 14, 2012, when 20 children and six adults were gunned down at Sandy Hook Elementary School in Newtown, Conn. I figured other media would provide ample coverage, and anything we did would look cheap or inappropriate. But two things turned me around.
| Jan 10, 2014
Special Report: K-12 school security in the wake of Sandy Hook
BD+C's exclusive five-part report on K-12 school security offers proven design advice, technology recommendations, and thoughtful commentary on how Building Teams can help school districts prevent, or at least mitigate, a Sandy Hook on their turf.
| Jan 9, 2014
16 recommendations on security technology to take to your K-12 clients
From facial recognition cameras to IP-based door hardware, here are key technology-related considerations you should discuss with your school district clients.