The Fenestration and Glazing Industry Alliance (FGIA) has updated a technical document intended to aid in the selection, use, and application of sealants commonly used in fenestration systems. AAMA 851, “Fenestration Sealants Guide for Windows, Window Walls and Curtain Walls,” an FGIA standard, is the first update to this document that was originally published in 2009.
“AAMA 851 is an excellent resource in helping identify areas of consideration when selecting sealant systems,” said Steve Altum (Dow Performance Silicones), chair of the Fenestration Sealant Application Guide Task Group, in a news release. “Choosing the right sealant system for the right application is critical to building or manufacturing products that can meet today’s industry standards and requirements.”
“While the individual manufacturer of sealant choice should always be consulted for specific performance attributes, this guide will help to identify some of the key considerations such as substrates, environmental, joint movements, and compatibility of components used in the overall system design,” Altum said. “It will be especially insightful for those new to the industry.”
The updated document reviews the type of sealants currently in use and their application following accepted standard practices. It encompasses both field and factory applications.
Related Stories
| Dec 22, 2011
AGC’s safety conference Jan. 11-13 in San Antonio
The Associated General Contractors of America’s national meeting for safety and health professionals will take place Jan. 11-13, 2012 in San Antonio, TX.
| Dec 22, 2011
Proposed New York City zoning revamp encourages rooftop solar and wind energy
New zoning regulation proposals to make it easier for building owners in New York City to make their structures more sustainable have entered the public approval process.
| Dec 15, 2011
Dayton, Ohio schools saving $2.6 million annually by building to LEED
On average, green schools save about $100,000 a year on operating costs, including energy and water savings.
| Dec 15, 2011
Building to LEED standards can pose new risks for construction workers
Workers on these projects suffer a 24% increase in falls to lower levels during roof work, which researchers attributed to the installation of solar panels, and a few other risks.
| Dec 15, 2011
NRDC charges Maine governor with weakening green wood requirement
The FSC program is administered through the Leadership in Energy and Environmental Design (LEED) and requires wood to be harvested in a sustainable way.
| Dec 15, 2011
Post-tornado, Tuscaloosa seeks to create walkable urban, retail areas
Block sizes initially were limited to a maximum perimeter of 1,750 feet, with no side of the block being longer than 500 feet.
| Dec 15, 2011
Allentown, Pa. city council asked to repeal union-friendly law
The mayor of Allentown, Pa. asked the City Council to repeal a year-old ordinance that forces contractors to hire union workers for large city projects funded with state and federal dollars.
| Dec 13, 2011
LEED-EB outpaces LEED for new construction
The U.S. Green Building Council's (USGBC's) LEED certifications for existing buildings standard is outpacing LEED for new buildings for the first time.
| Dec 13, 2011
Regulators charge pervasive abuse of construction workers in Connecticut
Federal and state regulators say they have uncovered what they call "widespread noncompliance" with minimum wage and overtime laws in Connecticut's construction industry.
| Dec 13, 2011
Philadelphia mayor signs order for project labor agreements
Philadelphia Mayor Michael Nutter signed an executive order establishing project labor agreements for major public works projects in Philadelphia.