The Fenestration and Glazing Industry Alliance (FGIA) has updated a technical document intended to aid in the selection, use, and application of sealants commonly used in fenestration systems. AAMA 851, “Fenestration Sealants Guide for Windows, Window Walls and Curtain Walls,” an FGIA standard, is the first update to this document that was originally published in 2009.
“AAMA 851 is an excellent resource in helping identify areas of consideration when selecting sealant systems,” said Steve Altum (Dow Performance Silicones), chair of the Fenestration Sealant Application Guide Task Group, in a news release. “Choosing the right sealant system for the right application is critical to building or manufacturing products that can meet today’s industry standards and requirements.”
“While the individual manufacturer of sealant choice should always be consulted for specific performance attributes, this guide will help to identify some of the key considerations such as substrates, environmental, joint movements, and compatibility of components used in the overall system design,” Altum said. “It will be especially insightful for those new to the industry.”
The updated document reviews the type of sealants currently in use and their application following accepted standard practices. It encompasses both field and factory applications.
Related Stories
| Sep 18, 2013
DBIA’s ‘Design-Build Done Right’ best practices project seeks industry input
The Design-Build Institute of America (DBIA) is seeking industry input on its project to create a design-build best practices document.
| Sep 11, 2013
USGBC Florida Chapter survey to help contractors adopt sustainable practices
Contractors in Florida could benefit from a data collection project by the state's chapter of the U.S. Green Building Council.
| Sep 11, 2013
Disability, vet hiring standards for contractors are goals, not quotas
Contractors that fall short of new federal hiring rules concerning veterans and disabled persons will not necessarily incur penalties, says Patricia Shiu, director of the Office of Federal Contract Compliance Programs.
| Sep 11, 2013
Sports stadium accidents suggest code updates may be necessary to prevent falls
Since 2000, at least three individuals have died as a result of falling from the upper decks of stadiums in the United States. In addition, eight non-fatal falls have occurred in stadiums and arenas over that time.
| Sep 11, 2013
White paper examines Joint Commission requirements for NFPA codes in healthcare
The healthcare industry has experienced great attention from The Joint Commission concerning fire and life safety issues.
| Sep 11, 2013
San Francisco expected to drop firefighter air tank refilling station rule for skyscrapers
San Francisco is poised to drop a requirement that skyscrapers have refill stations so firefighters can recharge their air tanks during a blaze. The city has required that new high-rises have the air refill systems for about ten years.
| Sep 5, 2013
State legislatures continue to raise the bar on green school construction
Since the beginning of 2013, the USGBC has followed more than 125 bills across 34 states that seek to advance healthy, high-performing schools.
| Sep 5, 2013
Construction industry groups create coalition to respond to new OSHA silica rule
A group of 11 construction trade associations has created the Construction Industry Safety Coalition in response to the Occupational Safety and Health Administration’s (OSHA) proposed rule on silica for the construction industry.
| Sep 5, 2013
Red tape delays California county jail construction projects
California authorized $1.2 billion for jail construction in 2007, but not a single county in the state has completed a jail project since then.
| Sep 5, 2013
New CM-at-risk and design-build options create controversy in Ohio
Some contractors say Ohio's new system puts small and midsize construction companies at a disadvantage.